linux kernel not booting stops at "starting kernel"

[Mrigendra Chaubey]

uEnv.txt

console=ttyS0,115200n8

netargs=setenv bootargs console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait debug earlyprintk mem=256M

netboot=echo Booting from Network ...; setenv autoload no ; load mmc 0:1 ${loadaddr} uImage ; load mmc 0:1 ${fdtaddr} am335x-boneblack.dtb ; run netargs ; bootm ${loadaddr} - ${fdtaddr}

with these, I am able to boot kernel 3.8

Now I am using same uboot.img and uEnv.txt and just replacing dtb and uImage for 4.4

Kernel 4.4 taken from here

uenvcmd=run netboothttps://github.com/beagleboard/linux

uboot logs

U-Boot SPL 2016.07 (Jul 19 2016 - 00:02:40)

Trying to boot from MMC1

MMC partition switch failed

*** Warning - MMC partition switch failed, using default environment

reading u-boot.img

reading u-boot.img

U-Boot 2016.07 (Jul 19 2016 - 00:02:40 +0530)

       Watchdog enabled

I2C:   ready

DRAM:  512 MiB

MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1

*** Warning - bad CRC, using default environment

Net:   <ethaddr> not set. Validating first E-fuse MAC

cpsw, usb_ether

Press SPACE to abort autoboot in 2 seconds

switch to partitions #0, OK

mmc0 is current device

Scanning mmc 0:1...

switch to partitions #0, OK

mmc0 is current device

SD/MMC found on device 0

switch to partitions #0, OK

mmc0 is current device

SD/MMC found on device 0

reading boot.scr

** Unable to read file boot.scr **

reading uEnv.txt

351 bytes read in 3 ms (114.3 KiB/s)

Loaded env from uEnv.txt

Importing environment from mmc0 ...

Running uenvcmd ...

Booting from Network ...

reading uImage

8715288 bytes read in 493 ms (16.9 MiB/s)

reading am335x-boneblack.dtb

56891 bytes read in 9 ms (6 MiB/s)

## Booting kernel from Legacy Image at 82000000 ...

   Image Name:   Linux-4.4.90

   Created:      2017-10-07  15:26:28 UTC

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    8715224 Bytes = 8.3 MiB

   Load Address: 80008000

   Entry Point:  80008000

   Verifying Checksum ... OK

## Flattened Device Tree blob at 88000000

   Booting using the fdt blob at 0x88000000

   Loading Kernel Image ... OK

   Loading Device Tree to 8ffef000, end 8ffffe3a ... OK

Starting kernel ...

I am booting with SD card.

[Mrigendra Chaubey]

Is something wrong with the question?