Unable to boot the beagle Board.

25 views
Skip to first unread message

Arunkumar Bailur

unread,
Aug 27, 2009, 4:02:57 AM8/27/09
to beagl...@googlegroups.com

HI All,

 

I just happed to work with GPIO port the board got hang , after that board Is unable to boot.

Getting the following log messages..

 

1st boot

ÿþ40V H¨HUá

ÍInstruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)

I2C read: I/O error

Reading boot sector

Error: reading boot sector

Loading u-boot.bin from nand

ECC Failed,à

0x00080000

12 0 0 2 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 40 1 e8 0 a0 1 e8 0 0 2 e8 0 60 2 e8 0 c0 2 e8 0 20 3 e8 0 80 3 e8 0 78 6 34 2 0 0 e8 0*á 0 d8 5 ec 0 34 2 ef 0 0 0 f`1 1f 0 c0 3 d3 0 80 3 0 0 29 1 68 0 4f 2 4 0à80 2 40 0 a0 3 2 0 80 0 1 1 a0 3 2 6 a0 3 3 0 81 0 3e 3 aÀ 3 3 0 81 0 f8 7 b0 0 f8 7 a1 0 2 0 50 1 fb 7 ff 2 2e 6 0 3 19 0 0 3 a4 0 4f 2 68 0 1f 5 1 0 50 1 7 0 0 2 70 0 1f 5 70 0 1f 5 2 0 43 0 2 Â2á 7 b0 0 f8 7 a1 0 2 0 50 1 æ7 ff 2 94 0 1f 5 1 7 40 2 80 ¢¢º3 a0 0 1f 5 a0 0 1f 5

                     Á 3 0 0 80 5 1 0 50 1 4 0 80 2 fb 7 ff 2 4 0 1f 5

 

 

 

2nd boot

 

40V¬H¨HUá

ÍInstruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)

timed out in wait_for_bb: I2C_STAT=1000

Reading boot sector

Error: reading boot sector

Loading u-boot.bin from nand

ECC Faile± page 0x00080000

1ø`0 0 2 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14Ê25 40 1 e8 0 a0 1 e8 0 0 2 e8 0 `*á 0 c0 2 e8 0 20 3 e8 0 80 3 e8 0 78 6 34 2 0 0 e80 0 0 e8 0 d8 5 ec 0 34 2 ef 0 0 0 f 1 1f 0 c0 3 d3 0 80 3 0 0 29 1 68 0 42 4 0 80 2 40 0 a0 3 2 0 80 0 1 1 a0 3 2 6 a0 3 3 0 81 0 3e 3 a0 3 3 0 81 0 f8 7 b0 0 f8 7 a1 0 2 0 50 1 fb 7 ff 2 2e 6 0 3 19 0 0 3 a4 0 4f 2 68 0 1f 5 1 0 50 1 7 0 0 2 70 0 1f 5 70 0 1f 5 2 0 43 0 2 0 80 0 f8 7 b0 0 f8 7 a1 0 2 0 50 1 fb 7 ff 2 94 0 1f 5 1 7 40 2 80 0 40 2ð 40 2 7 0 cd 3 a0 0 1f 5 a0 0 1f 5 0 0 a0 3 0 0 80 5 1 0 50 1 4 0 80 2 fb 7 ff 2 4 0 1f 5

 

Please respond  if you have seen this kind of issue and resolved…

 

Thanks,

Arun


http://www.mindtree.com/email/disclaimer.html

Arunkumar Bailur

unread,
Aug 27, 2009, 1:43:55 PM8/27/09
to beagl...@googlegroups.com

HI All,

I just happened to work with GPIO ports BB . the OS got hung, after the restart its not able to boot.
Getting the following error log messages..

1st boot
ÿþ40V H¨HUá
ÍInstruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
I2C read: I/O error
Reading boot sector
Error: reading boot sector
Loading u-boot.bin from nand
ECC Failed,à
0x00080000
12 0 0 2 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 40 1 e8 0 a0 1 e8 0 0 2 e8 0 60 2 e8 0 c0 2 e8 0 20 3 e8 0 80 3 e8 0 78 6 34 2 0 0 e8 0*á 0 d8 5 ec 0 34 2 ef 0 0 0 f`1 1f 0 c0 3 d3 0 80 3 0 0 29 1 68 0 4f 2 4 0à80 2 40 0 a0 3 2 0 80 0 1 1 a0 3 2 6 a0 3 3 0 81 0 3e 3 aÀ 3 3 0 81 0 f8 7 b0 0 f8 7 a1 0 2 0 50 1 fb 7 ff 2 2e 6 0 3 19 0 0 3 a4 0 4f 2 68 0 1f 5 1 0 50 1 7 0 0 2 70 0 1f 5 70 0 1f 5 2 0 43 0 2 Â2á 7 b0 0 f8 7 a1 0 2 0 50 1 æ7 ff 2 94 0 1f 5 1 7 40 2 80 ¢¢º3 a0 0 1f 5 a0 0 1f 5
Á 3 0 0 80 5 1 0 50 1 4 0 80 2 fb 7 ff 2 4 0 1f 5

2nd boot

40V¬H¨HUá
ÍInstruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
timed out in wait_for_bb: I2C_STAT=1000
Reading boot sector
Error: reading boot sector
Loading u-boot.bin from nand
ECC Faile± page 0x00080000
1ø`0 0 2 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14 0 9f 5 14Ê25 40 1 e8 0 a0 1 e8 0 0 2 e8 0 `*á 0 c0 2 e8 0 20 3 e8 0 80 3 e8 0 78 6 34 2 0 0 e80 0 0 e8 0 d8 5 ec 0 34 2 ef 0 0 0 f 1 1f 0 c0 3 d3 0 80 3 0 0 29 1 68 0 42 4 0 80 2 40 0 a0 3 2 0 80 0 1 1 a0 3 2 6 a0 3 3 0 81 0 3e 3 a0 3 3 0 81 0 f8 7 b0 0 f8 7 a1 0 2 0 50 1 fb 7 ff 2 2e 6 0 3 19 0 0 3 a4 0 4f 2 68 0 1f 5 1 0 50 1 7 0 0 2 70 0 1f 5 70 0 1f 5 2 0 43 0 2 0 80 0 f8 7 b0 0 f8 7 a1 0 2 0 50 1 fb 7 ff 2 94 0 1f 5 1 7 40 2 80 0 40 2ð 40 2 7 0 cd 3 a0 0 1f 5 a0 0 1f 5 0 0 a0 3 0 0 80 5 1 0 50 1 4 0 80 2 fb 7 ff 2 4 0 1f 5

Please respond if you have seen this kind of issue and resolved…

Thanks,
Arun

http://www.mindtree.com/email/disclaimer.html

Reply all
Reply to author
Forward
0 new messages