> --
> To join: http://beagleboard.org/discuss
> To unsubscribe from this group, send email to:
> beagleboard...@googlegroups.com
> Frequently asked questions: http://beagleboard.org/faq
Also remember that the BeagleBoard's and CraneBoard's video output is
restricted to 1400x1050 resolution because of the TI Sitara chipset
restriction
This time only /dev/ttyUSB0 showed, before both ttyUSB0 and 1 were there
and serial console was available using ttyUSB1.
Serial console is still running on 0, now /dev shows no ttyUSB devices.
root@bone:~# ls /dev/ttyUSB*
ls: cannot access /dev/ttyUSB*: No such file or directory
root@bone:~#
root@bone:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 006: ID 0c76:1607 JMTek, LLC. audio controller
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 007: ID 041e:3040 Creative Technology, Ltd SoundBlaster
Live! 24-bit External SB0490
# lsmod
Module Size Used by
bnep 9774 2
rfcomm 32861 0
bluetooth 144883 10 bnep,rfcomm
rfkill 17026 2 bluetooth
lp 7909 0
parport 38164 1 lp
snd_usb_audio 89801 0
snd_hwdep 5575 1 snd_usb_audio
snd_usbmidi_lib 16926 1 snd_usb_audio
usbhid 34120 0
root@bone:~# modprobe ftdi_sio
root@bone:~# l /dev/ttyUSB*
ls: cannot access /dev/ttyUSB*: No such file or directory
root@bone:~#
May be it needs a reboot as a new kernel came with the latest upgrade.
# ls /lib/modules/
3.1.0-psp3 3.1.6-x6
The system is going down for reboot NOW!
* Stopping web server apache2
apache2: Could not reliably determine the server's fully qualified
domain name, using 127.0.1.1 for ServerName
... waiting ... [ OK ]
Checking for running unattended-upgrades:
* Stopping bluetooth [ OK ]
* Asking all remaining processes to terminate... [ OK ]
* All processes ended within 1 seconds.... [ OK ]
modem-manager[522]: <info> Caught signal 15, shutting down...
* Deconfiguring network interfaces...
[146350.508540] INFO: rcu_sched_state detected stall on CPU 0 (t=6000
jiffies)
It stalled there and I had to use RESET key. It rebooted on the original
3.1.0-psp3 kernel and is up using ttyUSB0.
root@bone:~# l /dev/ttyUSB*
ls: cannot access /dev/ttyUSB*: No such file or directory
root@bone:~#
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot,
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
What's the reason for the size limit?
Eric
On Fri, Feb 3, 2012 at 9:56 PM, Fredric J. Einstein <fein...@frontier.com> wrote:
8 Gig is the size limit for an SD card on the CraneBoard. I believe
that the BeagleBoard has the same restriction. When I try to boot a 16
Gig SD card on the CraneBoard, it reports unreadable sectors while
booting. 8 Gig works perfectly though.
> --
On Fri, 2012-02-03 at 21:31 -0800, Eric Fort wrote:
> Is there any limit to the size of the SD card or file system
> partitions on the beagle bone (or any other beagle board)?
>
> Eric
>
>