Sitara Linux Program the eMMC on Beaglebone Black

[Jitheesh T]

I have been trying to program the eMMC on beaglebone black using uniflash through ethernet interface. I have gathered all the files based on the below URL,

 

http://processors.wiki.ti.com/index.php/Sitara_Linux_Program_the_eMMC_on_Beaglebone_Black

 

But  I am not able to flash the board. Please find the error that i am getting below,

 

" U-Boot SPL 2014.07-00107-gd28f2b9 <Feb 18 2016 - 20:31:36> ### ERROR ### Please RESET the board ### "

 

This is the first step i have done and i have been using ti-sdk-am335x-evm-08.00.00.00. Then somebody in the ti e2e forum suggested me to use the latest SDK from repository. I have tried that also(ti-processor-sdk-linux-am335x-evm-02.00.01.07). With this i am getting a new error. Please find the error below,

 

" U-Boot SPL 2015.07-00080-gfa53e9d-dirty <Feb 22 2016 - 17:00:39> SPL: Unsupported Boot Device! ### ERROR ### Please RESET the board ### "

 

Can somebody please provide any help on this issue as we are stuck at this.

 

Note:We are tried with flasher image with ethernet support. To support boot from ethernet we removed R67 and Mounted R92 on the beaglebone black board.

[Alex Ferm]

Did you ever find a solution to this issue? I ran into the same error today.

[Jitheesh T]

Hi Alex,

We never able to solve the issue using TI,s method, since the support from TI was really pathetic on this issue.

In fact we used a different method to solve the issue. Since i have changed my company recently i am not updated on the recent progress of the same. But i am sure they found a different method which is far more easier than this.

Regards

Jitheesh Surendran

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/SCZqb6vDEz0/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/555d4955-ee53-46d8-84e9-80164bca5157%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.