Hi everyone
I am currently making my own clone of BeagleBone in order to run the default image.
Looking more closely to the design I would like to ask some questions:
1. Lets say that I have the PCB board ready and it is time to solder the components,
Do I need the 24C256 eeprom in order to boot the new custom beaglebone with the default image?
2. Do I need to program devices before soldering them on the board? For example, do I need to program the EEPROM and then solder it?
3. Does the AM3359 is ready from the factory for soldering or I have to do smt first?
Thanks in advance
-- To join: http://beagleboard.org/discuss
To unsubscribe from this group, send email to:
beagleboard...@googlegroups.com
Frequently asked questions: http://beagleboard.org/faq
-- To join: http://beagleboard.org/discuss
To unsubscribe from this group, send email to:
beagleboard...@googlegroups.com
Frequently asked questions: http://beagleboard.org/faq
-- To join: http://beagleboard.org/discuss
To unsubscribe from this group, send email to:
beagleboard...@googlegroups.com
Frequently asked questions: http://beagleboard.org/faq
Card detect pin?
Hi Konstantinos, i 'm developing one custom beaglebone, i have just done test my board, it run U-boot, load kernel, start kernel well ... but it not mounting rootfs in my sd-card, i want ask for some experinences of your about custom beaglebone... can you help me?
Vào 00:31:25 UTC+5 Thứ tư, ngày 02 tháng năm năm 2012, Konstantinos Tsimpoukas đã viết:
Ok i got it
thanks again
-- To join: http://beagleboard.org/discuss
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
Apologies. What i meant is that "I'm now able to ..."
Regards
You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/Q65z5O4haYc/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.
I remember Robert shared u-boot sources where this eeprom check was omitted.
--