Skip to first unread message
Fabricio Henrique
Jul 9, 2016, 2:53:43 PM7/9/16
to BeagleBoard
I'm starting with beaglebone now and i'm stacked into a problem with it. When i connect my board to PC with USB cable it reconized but i can't access the SD card and the http://192.168.0.7 isn't working too.
The Led of RJ-45 is OK and there's a led that is blinking too.
Thanks for answers and sorry for the poor english i'm not a native speaker.
Wally Bkg
Jul 10, 2016, 10:27:04 AM7/10/16
to BeagleBoard
The "USB Gadget" Ethernet address should be 192.168.7.2 on. If your host OS won't mount the SD card, might be difficult (impossible) to install the drivers that your OS might need for the gadget interface. Check the beagleboard.org site to try and find a link to downloading the drivers separately.
Reply all
Reply to author
Forward
0 new messages