Happy holidays, and I miss you people

[Elliot]

My old faithful printer is starting to give out, and I'm replacing it with a delta. Of course I'm thinking of Bill Seiler as I put it together. It's only fair that I try a delta after he tried the graber.

Photo attached.

Happy holidays,

Elliot

[Damon Li]

That's enormous.  What's the print dimension?

Damon

--
You received this message because you are subscribed to the Google Groups "Bay Area RepRap" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bay-area-repr...@googlegroups.com.
To post to this group, send email to bay-are...@googlegroups.com.
Visit this group at https://groups.google.com/group/bay-area-reprap.
For more options, visit https://groups.google.com/d/optout.

<IMG_20171215_220416.jpg>

[Bill Seiler]

Deltas have improved.  But my graber still prints the best.  How about a ultamaker clone?  Walters prints the best!  How is it back in the cold place.  

Happy Holidays

Merry Christmas

--

You received this message because you are subscribed to the Google Groups "Bay Area RepRap" group.

To unsubscribe from this group and stop receiving emails from it, send an email to bay-area-reprap+unsubscribe@googlegroups.com.
To post to this group, send email to bay-area-reprap@googlegroups.com.

[Bill Ruckman]

We miss you too Elliot. Happy holidays to you and your family. 

On Sat, Dec 16, 2017 at 8:05 AM Bill Seiler <bseil...@gmail.com> wrote:

Deltas have improved.  But my graber still prints the best.  How about a ultamaker clone?  Walters prints the best!  How is it back in the cold place.  

Happy Holidays

Merry Christmas

On Dec 15, 2017 8:05 PM, "Elliot" <efo...@firetaco.com> wrote:

My old faithful printer is starting to give out, and I'm replacing it with a delta. Of course I'm thinking of Bill Seiler as I put it together. It's only fair that I try a delta after he tried the graber.

Photo attached.

Happy holidays,

Elliot

--
You received this message because you are subscribed to the Google Groups "Bay Area RepRap" group.

To unsubscribe from this group and stop receiving emails from it, send an email to bay-area-repr...@googlegroups.com.
To post to this group, send email to bay-are...@googlegroups.com.

Visit this group at https://groups.google.com/group/bay-area-reprap.
For more options, visit https://groups.google.com/d/optout.

--

You received this message because you are subscribed to the Google Groups "Bay Area RepRap" group.

To unsubscribe from this group and stop receiving emails from it, send an email to bay-area-repr...@googlegroups.com.
To post to this group, send email to bay-are...@googlegroups.com.

[Elliot]

340mm diameter, 500mm height print volume.  It's a "Tevo Delta Little Monster" -- I bought it after reading AK Eric's blog post: http://www.akeric.com/blog/?p=4325

On Fri, Dec 15, 2017 at 10:53 PM, Damon Li <damo...@gmail.com> wrote:

That's enormous.  What's the print dimension?

Damon

On Dec 15, 2017, at 8:05 PM, Elliot <efo...@firetaco.com> wrote:

My old faithful printer is starting to give out, and I'm replacing it with a delta. Of course I'm thinking of Bill Seiler as I put it together. It's only fair that I try a delta after he tried the graber.

Photo attached.

Happy holidays,

Elliot

--
You received this message because you are subscribed to the Google Groups "Bay Area RepRap" group.

To unsubscribe from this group and stop receiving emails from it, send an email to bay-area-reprap+unsubscribe@googlegroups.com.
To post to this group, send email to bay-area-reprap@googlegroups.com.

Visit this group at https://groups.google.com/group/bay-area-reprap.
For more options, visit https://groups.google.com/d/optout.

<IMG_20171215_220416.jpg>

--

You received this message because you are subscribed to the Google Groups "Bay Area RepRap" group.

To unsubscribe from this group and stop receiving emails from it, send an email to bay-area-reprap+unsubscribe@googlegroups.com.
To post to this group, send email to bay-area-reprap@googlegroups.com.

[Elliot]

The cold place is great! I went sledding with my eldest the other day at an excellent hill a block away from our home, and I have room for 3d printing stuff (other than the kitchen table)!

The delta is pretty neat, and I'll probably use it to print another Graber or something else. I am, of course, running into a problem with the delta that I need to figure out where the prints are leaning away from one tower.

I remember there being some sort of resource for diagnosing delta problems. What was that site, or is there a better one?

[Bill Seiler]

My leaning problems were caused by slipping belts.

[Elliot]

And mine was caused by a loose belt pulley!  A bit of loctite and it hopefully won't happen again.  Thank you, Bill!