Needed: Prototyping Cardboard

[Kacee Granke]

The space is almost out of nice big sheets of flat-ish cardboard that can be used for prototyping.

If you have any big boxes you have flattened and are planning to recycle, bring them to the space to stash behind the CNC instead!

Thanks!

[Zak Smolen]

Also check with Nick next door. I often see large boxes around there.

--
You received this message because you are subscribed to the Google Groups "Asheville Makers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ashevillemakers+unsubscribe@googlegroups.com.
To post to this group, send email to ashevillemakers@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Robere Crown]

I can bring a big’n next week! 

On Mon, May 7, 2018 at 2:47 PM Zak Smolen <zaks...@gmail.com> wrote:

Also check with Nick next door. I often see large boxes around there.

On Mon, May 7, 2018 at 2:25 PM, Kacee Granke <kgr...@gmail.com> wrote:

The space is almost out of nice big sheets of flat-ish cardboard that can be used for prototyping.

If you have any big boxes you have flattened and are planning to recycle, bring them to the space to stash behind the CNC instead!

Thanks!

--
You received this message because you are subscribed to the Google Groups "Asheville Makers" group.

To unsubscribe from this group and stop receiving emails from it, send an email to ashevillemake...@googlegroups.com.
To post to this group, send email to ashevil...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Asheville Makers" group.

To unsubscribe from this group and stop receiving emails from it, send an email to ashevillemake...@googlegroups.com.
To post to this group, send email to ashevil...@googlegroups.com.

[Tim Swihart, Sr.]

How small is big enough?  I have a variety available now but mostly 2ft or so on their longest axis.  I'll have much bigger in the near future as I get a chance to unpack/setup more of the equipment for my new shop.  Some of those will be 6ft or longer.

[Kacee Granke]

2ft is definitely good enough! Bigger is better but 2ft has application for sure. Thanks!

--

You received this message because you are subscribed to the Google Groups "Asheville Makers" group.

To unsubscribe from this group and stop receiving emails from it, send an email to ashevillemakers+unsubscribe@googlegroups.com.
To post to this group, send email to ashevillemakers@googlegroups.com.