Matter and Form 3D scanner

[John Hay]

I posted some info on the 3D scanner to the "Equipment" section of our wiki...

http://wiki.ashevillemakers.org/doku.php?id=matter_and_form_3d_scanner

Its usage is pretty straight forward, not a lot of options in the hardware or software. In the wiki, I included some links to their how to YouTube videos as well as a link to the manual. The software can be downloaded but they want your e-mail address.

It can output an STL file which can then be used in a 3D printer for duplicating an object. I haven't printed anything that I scanned yet, but I did import the STL into the 3D printer software to verify it would accept the file.

I'll bring the scanner back to the space tomorrow night.

-John Hay

[Steve Altemeier]

Thanks, John!

--
You received this message because you are subscribed to the Google Groups "Asheville Makers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ashevillemakers+unsubscribe@googlegroups.com.
To post to this group, send email to ashevillemakers@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Nick Moen]

Thanks John! This is great. 

Sincerely,

Nick Moen

---

www.nickmoen.com

instagram.com/nsmoen

facebook.com/nickmoenstudios

To unsubscribe from this group and stop receiving emails from it, send an email to ashevillemake...@googlegroups.com.
To post to this group, send email to ashevil...@googlegroups.com.

[ChaBuku Alex Bakke]

Did this one come from Mojo as well? I know they had a Matter & Form scanner when I had a desk.

[John Hay]

I think some one mentioned that it did come from there but I'm not sure.

John Hay
Sent from mobile 🚫⚓

--

[Ian Baillie]

Yes, it did.

---

From: John Hay
Sent: ‎12/‎27/‎2016 10:18 AM
To: ashevil...@googlegroups.com
Cc: Asheville Makers
Subject: Re: {Asheville Makers} Re: Matter and Form 3D scanner