Photo's from the welding class.

[Apollo Timbers]

[Brad Tissi]

Those are some great shots!

Very good PR material for both the site and traveling pi slideshow.

[Travis Megee]

Probably not the best PR material given the lack of a proper exhaust.

On Fri, Aug 4, 2017, 11:49 Brad Tissi <bti...@gmail.com> wrote:

Those are some great shots!

Very good PR material for both the site and traveling pi slideshow.

--
You received this message because you are subscribed to the Google Groups "Arch Reactor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor...@googlegroups.com.
To post to this group, send email to arch-r...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/ed33d427-1fca-4966-99a8-6205a5a30a29%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Brad Tissi]

Hmm, say that we brought in temp exhaust? :D

[Robert Kleeschulte]

Make a exhaust door plug for the roll-up door with a few shutter fans?

I don't know if  there is interest in going for one of these.

LINCOLN ELECTRIC, MOBIFLEX 200-M
https://www.1ststrike.com/lots/view/lincoln-3-1

They are expensive new, but go very cheap used.

On Fri, Aug 4, 2017 at 12:04 PM, Brad Tissi <bti...@gmail.com> wrote:

Hmm, say that we brought in temp exhaust? :D

--

You received this message because you are subscribed to the Google Groups "Arch Reactor" group.

To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor+unsubscribe@googlegroups.com.

To post to this group, send email to arch-r...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/9c673611-2a96-4af9-8a0b-1853f725ec64%40googlegroups.com.

[Brad Tissi]

I doubt that it would be difficult to make something functional and get the fumes out, but isn't there a building permit issue or some complication?

I vaguely remember reading the discussion on this.

--
You received this message because you are subscribed to a topic in the Google Groups "Arch Reactor" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/arch-reactor/wdFm-LkhJMA/unsubscribe.
To unsubscribe from this group and all its topics, send an email to arch-reactor+unsubscribe@googlegroups.com.

To post to this group, send email to arch-r...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/CAMyyWZL9trbU9tf%2BJD_dWV4-O0Q%3DAW-aDjobsyGAyvDJMNtPiA%40mail.gmail.com.

[Apollo Timbers]

I'm glad you like the photos Brad, I'm happy with how they turned out as well. They were shot with Ilford Delta 3200 blank and white film. It is a bit unfortunate about the exhaust part of this equation. 

Apollo 

[EschewObfuscation]

On Sunday, August 6, 2017 at 11:18:58 AM UTC-5, Apollo Timbers wrote:

I'm glad you like the photos Brad, I'm happy with how they turned out as well. They were shot with Ilford Delta 3200 blank and white film. It is a bit unfortunate about the exhaust part of this equation. 

Apollo

The target audience isn't likely to notice a lack of ventilation, so that's not a big problem.

I wasn't aware of this class until this thread appeared; was it posted somewhere people could see it via the net? Do we have to face or twit or something to see these things?

[Chris Weiss]

it's been on the calendar.

it would be nice is people running classes would post about it.

[Frank Kallal]

There was a thread about it somewhere ... it was mentioned somewhere because I knew about it and I don't come to the meetings power that said it was probably just one thread

On Aug 7, 2017 1:59 PM, "Chris Weiss" <cwe...@gmail.com> wrote:

it's been on the calendar.

it would be nice is people running classes would post about it.

--

You received this message because you are subscribed to the Google Groups "Arch Reactor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor+unsubscribe@googlegroups.com.
To post to this group, send email to arch-r...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/CAEhO07NARCwiT7Hh-LDwQ3QF0z_H-qErd64AXKLGfETzdXWwrw%40mail.gmail.com.