I already did the project in sketchup to check fit up and should be able to convert it over to laser faster than I could saw it out. It would be about 16"x16". I've taken the class but I would prefer some supervision so I don't accidentally burn the place down.
Has anyone successfully laser cut hardboard? I need to make some long term woodworking templates and hardboard stays flatter longer than 1/4" plywood. I prefer the single white sided (white board) for my templates compared to the 1 smooth 1 fuzzy sided stuff.
I already did the project in sketchup to check fit up and should be able to convert it over to laser faster than I could saw it out. It would be about 16"x16". I've taken the class but I would prefer some supervision so I don't accidentally burn the place down.
--
You received this message because you are subscribed to the Google Groups "Arch Reactor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor+unsubscribe@googlegroups.com.
To post to this group, send email to arch-r...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/30e113d5-2929-4584-8ca0-8634328f0618%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.