Benchtop Table Router

[Frank Kallal]

If i can make it out on Tuesday Night, can someone give me a Quick Once over on the Bench Top table Router?

I've used Routers before, but never the AR one or one mounted  (Not Free Hand)


Frank

[Jim S]

I will be there and can do that.

Jim

[Derek Sigler]

I need to jump in on this too.  I tried using it 2 weeks ago and was having some severe kickback.  Maybe that specific blade was dull.  I'll help document things.

-derek

[Andrew Ricke]

A few big things to be aware of for your write-ups.

1)  Good sharp blades are crucial and those yellow ones are not.

2) The workpeice goes right to left against the fence. That will make the blade push the board back against you and the fence.  If you loose against the push, your hand goes away from the blade.  Left to right pulls away from your weaker finger tips and pulls your hand to the blade.

3) The board should never go between the blade and fence.   The blade is kept in the pocket of the fence.

On Mon, May 8, 2017, 12:18 PM 'Derek Sigler' via Arch Reactor <arch-r...@googlegroups.com> wrote:

I need to jump in on this too.  I tried using it 2 weeks ago and was having some severe kickback.  Maybe that specific blade was dull.  I'll help document things.

-derek

--
You received this message because you are subscribed to the Google Groups "Arch Reactor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor...@googlegroups.com.
To post to this group, send email to arch-r...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/1559149698.2763942.1494260278986%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

[Frank Kallal]

So I forgot the Kids had a Concert thing tonight and I just got home.  So i'm out for now.  but i'll learn it next time i'm down.  Thanks alot for offering

--

You received this message because you are subscribed to the Google Groups "Arch Reactor" group.

To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor+unsubscribe@googlegroups.com.

To post to this group, send email to arch-r...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/6e09edca-9d6a-442c-860b-01e6b3e4f4a3%40googlegroups.com.