AR Logo DXF

[Robert Kleeschulte]

I though there was a dxf of the AR logo in branding.

Does anyone have one? I hate to convert because some curves are messing up for me.

Thinking of something for the fire and ice auction and another possible auction or for the space piece.

[Morgan Miransky]

--
You received this message because you are subscribed to the Google Groups "Arch Reactor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor+unsubscribe@googlegroups.com.
To post to this group, send email to arch-r...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/CAMyyWZJ6yzE0k38E50hVSgAFtOj0jv%2BD1qgNba4PUZAkKJwppQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[Di]

Check the "diane" subdirectory on the laser computer.   It should be in an obvious folder.   it'll likely also be in the "edge lit sign" folder, as it's part of that design, too.

If you still can't find it, I can send it tonight from my other laptop.

[Robert Kleeschulte]

Thanks for the offer Diane Morgan sent what I needed. Now to see what scrap I can cut at work.

 

On Wed, Jan 31, 2018 at 12:13 PM, Di <sudd...@gmail.com> wrote:

Check the "diane" subdirectory on the laser computer.   It should be in an obvious folder.   it'll likely also be in the "edge lit sign" folder, as it's part of that design, too.

If you still can't find it, I can send it tonight from my other laptop.

--
You received this message because you are subscribed to the Google Groups "Arch Reactor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor+unsubscribe@googlegroups.com.
To post to this group, send email to arch-r...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/CAMujB28%3DJc-c-f1pE16nnqR%3DCjrxdYbtH0us2RHPH%3DvmvJHihQ%40mail.gmail.com.

[Robert Kleeschulte]

Standard coaster size won’t work. 

On Wed, Jan 31, 2018 at 13:13 Robert Kleeschulte <rob...@gmail.com> wrote:

Thanks for the offer Diane Morgan sent what I needed. Now to see what scrap I can cut at work.

 

On Wed, Jan 31, 2018 at 12:13 PM, Di <sudd...@gmail.com> wrote:

Check the "diane" subdirectory on the laser computer.   It should be in an obvious folder.   it'll likely also be in the "edge lit sign" folder, as it's part of that design, too.

If you still can't find it, I can send it tonight from my other laptop.

--
You received this message because you are subscribed to the Google Groups "Arch Reactor" group.

To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor...@googlegroups.com.

To post to this group, send email to arch-r...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/CAMujB28%3DJc-c-f1pE16nnqR%3DCjrxdYbtH0us2RHPH%3DvmvJHihQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--

Sent from Gmail Mobile

[Chris Weiss]

plasma?

[Robert Kleeschulte]

Yes. 

The thin gaps don’t work well so it was ran as no offset. 10gauge better but still crap. Now on a 12x12 it is very nice. 

On Fri, Feb 9, 2018 at 16:37 Chris Weiss <cwe...@gmail.com> wrote:

plasma?

--
You received this message because you are subscribed to the Google Groups "Arch Reactor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor...@googlegroups.com.
To post to this group, send email to arch-r...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/CAEhO07OPaaQ3sSPGL90pmQX-2rFdxFJEkHQigk6EwzZ-W6p5iw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

[Robert Kleeschulte]

Frank,

Can You send me the DXF for the Gateway Burners logo?

On Fri, Feb 9, 2018 at 5:16 PM, Robert Kleeschulte <rob...@gmail.com> wrote:

Yes. 

The thin gaps don’t work well so it was ran as no offset. 10gauge better but still crap. Now on a 12x12 it is very nice. 

On Fri, Feb 9, 2018 at 16:37 Chris Weiss <cwe...@gmail.com> wrote:

plasma?

--
You received this message because you are subscribed to the Google Groups "Arch Reactor" group.

To unsubscribe from this group and stop receiving emails from it, send an email to arch-reactor+unsubscribe@googlegroups.com.

To post to this group, send email to arch-r...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/arch-reactor/CAEhO07OPaaQ3sSPGL90pmQX-2rFdxFJEkHQigk6EwzZ-W6p5iw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[Frank Kallal]

thanks for the Reminder.  here you go.