Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

AMC 3 lineup

0 views
Skip to first unread message

Sig Knell

unread,
May 18, 2004, 5:48:43 PM5/18/04
to
I have been setting up all the transponders on my sat receiever for AMC 3
using the info from Lyngsat.
I have got a few channels but not all seem to work from the Lyngsat AMC 3
page. I know things change readily but has anyone been able to get TP 18
,12048V and get Florida Knowledge etc. I do not get any signal or qaulity on
that freq. Also tp 14 11984V, same no signal strength.
Also no listing for TP 22?
For searching what is the best way to figure out the SR to be used?

CHEERS


DRLev

unread,
May 18, 2004, 6:16:07 PM5/18/04
to
AFAIK Florida Knowledge is DCII and not DVB

"Sig Knell" <troll...@hotmail.com> wrote in message
news:Zwvqc.21644$qJ5.5...@news20.bellglobal.com...

RockinRick

unread,
Jul 14, 2004, 4:48:30 PM7/14/04
to
And, besides a blind search receiver, the only way to find the SR is
to guess. Go ahead and guess, there's only 30,000 possibilities.

DRLev

unread,
Jul 14, 2004, 5:01:04 PM7/14/04
to
It is DCII there are a very limited number of possible SR's. Less than 10.
He also mentioned that he is using the info at Lyngsat which reduces the
SR's he needs to attempt to 1.

The problem is not with the definitions he is using. The problem is that the
feed is DigiCipher and not DVB.


"RockinRick" <no...@no.way> wrote in message
news:400bf0tqdapvk0aip...@4ax.com...

0 new messages