Excell Power washer has no pressure
pdq911
for an hour. The engine continued to run, but there was absolutely no
pressure coming out. I could put my finger over the open end of the
pressure washer and keep any water from coming out. I've removed the hose
and verified there's no obstructions and i have good water pressure from
the house...Could it be my pump is bad? I did notice 2 things after it
stopped providing pressure....my son had turned on the hot water on so I'd
been washing with pure hot water prior to the failure, and the 2nd thing I
noticed was a sucking noise coming from the nozzle for the soap hose
(located on the inlet connection)
any suggestions would help before I take it to the local true value for
repair.
Thanks, Pete
-------------------------------------
##-----------------------------------------------##
Delivered via http://www.thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.home.repair - 368059 messages and counting!
##-----------------------------------------------##
Stormin Mormon
368059 spam and counting!
--
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"pdq911" <tec2mro_at_y...@foo.com> wrote in message
news:4a7df718$0$9607$716...@news.usenetserver.com...
##-----------------------------------------------##
Delivered via http://www.thesuckocompany.com/
ransley
Blaming the hot water on your son isnt nice.
Tony Hwang
Sounds like your washer intestine melted by hot water.
JimmyDahGeek
> pressure washer and keep any water from coming out. I've removed the hose
> and verified there's no obstructions and i have good water pressure from
Check to make sure the gun itself isn't clogged. This is what
happened to mine. There was a tiny piece of crap stuck just before
the tip of the gun.
Smitty Two
tec2mro_at_y...@foo.com (pdq911) wrote:
> any suggestions would help
Pay some fucking attention. The suckwad company is UNWELCOME here. If
you don't know where "here" is, then wake the fuck up.
pdq911
http://www.thestuccocompany.com/maintenance/Re-Excell-Power-washer-has-no-pressure-388087-.htm
:
JimmyDahGeek wrote:
> > pressure coming out. =A0I could put my finger over the open end of
>> the
>> pressure washer and keep any water from coming out. =A0I've
>> removed the h=
> ose
>> and verified there's no obstructions and i have good water
>> pressure from
> Check to make sure the gun itself isn't clogged. This is what
> happened to mine. There was a tiny piece of crap stuck just before
> the tip of the gun.
-------------------------------------
No, I've removed the pressure wand and the hose from the unit and there's
still no pressure coming out
##-----------------------------------------------##
Delivered via http://www.thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.home.repair - 369018 messages and counting!
##-----------------------------------------------##
Stormin Mormon
The Stucco site is not a help forum, it's an
*advertising* forum that invades real forums
(like "alt.home.repair", part of "usenet")
parasitically in order to generate free
advertising for itself, which continually
advances its search engine placement, thereby
increasing its own revenue through its click-
through advertising commissions.
So the first thing you should do is write them
an email and tell them to quit spamming.
Then try to find your way here through proper
channels. Please do a google search on "Usenet"
and post the regular way.
--
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"pdq911" <tec2mro_at_y...@foo.com> wrote in message
news:4a84a066$0$5596$726...@news.usenetserver.com...
-------------------------------------
##-----------------------------------------------##
Delivered via http://www.thesuckocompany.com/