Alt-F-0.1RC5: issue with usb disk on DNS-325

[mike7]

After upgrade to Alt-F-0.1RC5 usb disk is not recognized as usb-storage device on DNS-325

before connection:
lsusb -vt
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=orion-ehci/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M
        |__ Port 2: Dev 3, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 4: Dev 5, If 0, Class=stor., Driver=usb-storage, 480M

after connection:
lsusb -vt
1-1.1:1.0: No such file or directory
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=orion-ehci/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 6, If 0, Class=stor., Driver=, 480M
        |__ Port 2: Dev 3, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 4: Dev 5, If 0, Class=stor., Driver=usb-storage, 480M

lsusb -v

Bus 001 Device 006: ID 0bc2:2312 Seagate RSS LLC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0bc2 Seagate RSS LLC
  idProduct          0x2312
  bcdDevice            6.36
  iManufacturer           1 Seagate
  iProduct                2 Expansion
  iSerial                 3 NA43MYRP
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           85
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8b  EP 11 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0a  EP 10 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           4
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     98
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x08  EP 8 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
        INTERFACE CLASS:  04 24 01 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
        INTERFACE CLASS:  04 24 02 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0a  EP 10 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
        INTERFACE CLASS:  04 24 04 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8b  EP 11 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
        INTERFACE CLASS:  04 24 03 00
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

lsusb
Bus 001 Device 006: ID 0bc2:2312 Seagate RSS LLC

There were no issues with Alt-F-0.1RC4.1, what additional information I should provide?

[João Cardoso]

On Monday, 27 June 2016 21:08:49 UTC+1, mike7 wrote:

After upgrade to Alt-F-0.1RC5 usb disk is not recognized as usb-storage device on DNS-325

before connection:
lsusb -vt
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=orion-ehci/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M
        |__ Port 2: Dev 3, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 4: Dev 5, If 0, Class=stor., Driver=usb-storage, 480M

after connection:
lsusb -vt
1-1.1:1.0: No such file or directory
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=orion-ehci/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 6, If 0, Class=stor., Driver=, 480M
        |__ Port 2: Dev 3, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 4: Dev 5, If 0, Class=stor., Driver=usb-storage, 480M

... 

lsusb
Bus 001 Device 006: ID 0bc2:2312 Seagate RSS LLC

There were no issues with Alt-F-0.1RC4.1, what additional information I should provide?

I had no issues on any of my boxes with USB disks/pens and one hub.

Have you tried other USB pens/disks? How many disks do you have? Tried without a hub? replug the hub/disk/pen after powerup? Please recheck.

Upgraded all packages? including kernel-modules and kernel-modules-armv5? (shouldn't be needed, but there has been changes in kernel-modules and there is a new kernel-modules-armv5. On a fresh install (I mean, no Alt-F folder) I had no issues on a 325 with a usb hub and one usb pen (tested it just now), but if you had upgraded kernel-modules while on RC4.1... hmmm, no, no kernel-modules upgrade has been released for RC4.1 -- writing for myself, for future reference :-(

Please *attach* /var/log/hot.log and hot_aux.log  as well as the system log (logread) after plugging (or use System->Utilities->View Logs

[mike7]

João,

I've got the same issue on DNS-323, looks like RC5 doesn't work with the particular disk.

You can find logs for RC4.1, RC5 and RC5 without hub on https://drive.google.com/open?id=0BwmgwsMIkgrKMjYtWUxfVXkyU0E

I checked different configurations, with and without hub, but it worked in RC4.1 and doesn't work in RC5

PS. Other usb disks working without problems.

[João Cardoso]

On Tuesday, 28 June 2016 20:45:09 UTC+1, mike7 wrote:

João,

I've got the same issue on DNS-323, looks like RC5 doesn't work with the particular disk. 

You can find logs for RC4.1, RC5 and RC5 without hub on https://drive.google.com/open?id=0BwmgwsMIkgrKMjYtWUxfVXkyU0E

The logs from RC5 shows that one sdc disk (named 'stick')  was detected, checked and mounted (and an Alt-F folder was even found there), so I don't know what the problem is.

From the 323-RC5 system log:

Jun 28 22:13:26 tmpdl007 user.notice kernel: scsi 2:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 2

Jun 28 22:13:26 tmpdl007 user.notice kernel: sd 2:0:0:0: [sdc] 2057728 512-byte logical blocks: (1.05 GB/1004 MiB)

Jun 28 22:13:26 tmpdl007 user.info kernel:  sdc: sdc1

Jun 28 22:13:26 tmpdl007 user.notice kernel: sd 2:0:0:0: [sdc] Attached SCSI removable disk

Jun 28 22:13:30 tmpdl007 user.notice hot_aux: Start  fscking sdc1

Jun 28 22:13:31 tmpdl007 user.notice hot_aux: Finish fscking sdc1: fsck 1.41.14 (22-Dec-2010) stick: clean, 440/64384 files, 15639/257208 blocks

Jun 28 22:13:32 tmpdl007 user.info kernel: EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)

Jun 28 22:13:32 tmpdl007 user.notice hot_aux: Alt-F directory found in stick

[mike7]

stick is usb flash stick for Alt-F only which is connected to the same usb hub.
you can find stick (sdd) in RC4.1 also, I didn't change configuration before update, I have an issue on RC5 with Seagate usb disk (it's sdc in RC4.1).

I can reproduce issue on DNS-323 and DNS-325, what else I can check?

Thank you.

[mike7]

I googled a bit, and found info about issues with Seagate disks and 3.15+ kernel

Unfortunately my poor Linux knowledge doesn't allow me to understand details.
I tried suggestion from https://bbs.archlinux.org/viewtopic.php?pid=1441510#p1441510
in different form echo -n quirks=0bc2:2312:u | tee /sys/module/usb_storage/parameters/quirks, but without success

[João Cardoso]

On Wednesday, 29 June 2016 21:12:23 UTC+1, mike7 wrote:

I googled a bit, and found info about issues with Seagate disks and 3.15+ kernel

RC5 uses 3.18.28, released March 2016, far more recent. Don't know if the UAS issue you found was or not fixed.

Is the drive USB powered?

There is not much one can do. From the log, the drive is not even detected by the linux kernel, which would deploy entries to appear in hot.log, etc.

You can see if the kernel detects it by unplugging the usb cable to the box, issuing the 'dmesg' command and noticing the las few lines output, then re-plugging the USB cable, waiting a couple of seconds, issuing the 'dmesg' command again and seeing if (and what) anything new appeared in its output.

Unfortunately until next monday I'm in a place where my internet connection tops at 10KBps and constantly dropping; it's almost useless and my help is very limited

[mike7]

João,

I extracted disk from the case and connected it to another usb converter. And it's working perfect now.
If you will have ideas how to solve issues with Seagate controller I'm ready to check - I have DNS-323 for testing.

Thank you

[Gabriel Paré-Olivier]

I figured out I have the same issue (I guess) with my Seagate STBV4000100. It's a powered USB device (external power supply).

Here's dmesg output w/o my Seagate drive:

Booting Linux on physical CPU 0x0

Linux version 3.18.28 (jcard@silver) (gcc version 4.3.3 (GCC) ) #1 Thu Jun 16 15:55:06 WEST 2016

CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f

CPU: VIVT data cache, VIVT instruction cache

Machine: D-Link DNS-321/323

Clearing invalid memory bank 0KB@0xffffffff

Clearing invalid memory bank 0KB@0xffffffff

Clearing invalid memory bank 0KB@0xffffffff

Ignoring unrecognised tag 0x00000000

Ignoring unrecognised tag 0x00000000

Ignoring unrecognised tag 0x00000000

Ignoring unrecognised tag 0x41000403

bootconsole [earlycon0] enabled

Memory policy: Data cache writeback

On node 0 totalpages: 16384

free_area_init_node: node 0, pgdat c04376ac, node_mem_map c3f7b000

  Normal zone: 128 pages used for memmap

  Normal zone: 0 pages reserved

  Normal zone: 16384 pages, LIFO batch:3

pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

pcpu-alloc: [0] 0

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256

Kernel command line: console=ttyS0,115200 root=/dev/ram0 init=/init earlyprintk root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 54240K/65536K available (3447K kernel code, 143K rwdata, 540K rodata, 156K init, 84K bss, 11296K reserved)

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)

    vmalloc : 0xc4800000 - 0xff000000   ( 936 MB)

    lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)

    modules : 0xbf000000 - 0xc0000000   (  16 MB)

      .text : 0xc0008000 - 0xc03ecf54   (3988 kB)

      .init : 0xc03ed000 - 0xc0414000   ( 156 kB)

      .data : 0xc0414000 - 0xc0437cc0   ( 144 kB)

       .bss : 0xc0437cc0 - 0xc044cf7c   (  85 kB)

NR_IRQS:65

sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns

Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)

pid_max: default: 4096 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

CPU: Testing write buffer coherency: ok

Setting up static identity map for 0x364460 - 0x36449c

xor: measuring software checksum speed

   arm4regs  :   386.000 MB/sec

   8regs     :   336.400 MB/sec

   32regs    :   303.200 MB/sec

xor: using function: arm4regs (386.000 MB/sec)

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

Orion ID: MV88F5182-A2. TCLK=166666667.

DNS-321/323: Identified HW revision C1

initial MPP regs: 00000003 55550000 03ff0000

  final MPP regs: 00000003 55550000 03ff5550

DNS-321/323: Found ethernet MAC address: f0:7d:68:66:ce:d2.

raid6: int32x1     20 MB/s

raid6: int32x2     30 MB/s

raid6: int32x4     39 MB/s

raid6: int32x8     34 MB/s

raid6: using algorithm int32x4 (39 MB/s)

raid6: using intx1 recovery algorithm

SCSI subsystem initialized

libata version 3.00 loaded.

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Switched to clocksource orion_clocksource

NET: Registered protocol family 2

TCP established hash table entries: 1024 (order: 0, 4096 bytes)

TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

TCP: Hash tables configured (established 1024 bind 1024)

TCP: reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

PCI: CLS 0 bytes, default 32

Trying to unpack rootfs image as initramfs...

rootfs image is not initramfs (junk in compressed archive); looks like an initrd

Freeing initrd memory: 6292K (c0800000 - c0e25000)

futex hash table entries: 16 (order: -5, 192 bytes)

VFS: Disk quotas dquot_6.5.2

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

squashfs: version 4.0 (2009/01/31) Phillip Lougher

fuse init (API version 7.23)

aufs 3.18.25+-20160301

msgmni has been set to 118

async_tx: api initialized (async)

io scheduler noop registered

io scheduler cfq registered (default)

Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled

console [ttyS0] disabled

serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 4, base_baud = 10416666) is a 16550A

console [ttyS0] enabled

bootconsole [earlycon0] disabled

brd: module loaded

loop: module loaded

sata_mv sata_mv.0: version 1.28

sata_mv sata_mv.0: cannot get optional clkdev

sata_mv sata_mv.0: slots 32 ports 2

scsi host0: sata_mv

scsi host1: sata_mv

ata1: SATA max UDMA/133 irq 30

ata2: SATA max UDMA/133 irq 30

physmap platform flash device: 00800000 at f4000000

physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x00007f Chip ID 0x0000cb

Amd/Fujitsu Extended Query Table at 0x0040

  Amd/Fujitsu Extended Query version 1.1.

number of CFI chips: 1

Creating 5 MTD partitions on "physmap-flash.0":

0x000000000000-0x000000010000 : "MTD1"

0x000000010000-0x000000020000 : "MTD2"

0x000000020000-0x0000001a0000 : "Linux Kernel"

0x0000001a0000-0x0000007d0000 : "File System"

0x0000007d0000-0x000000800000 : "u-boot"

libphy: orion_mdio_bus: probed

mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4

mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address f0:7d:68:66:ce:d2

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ehci-pci: EHCI PCI platform driver

ehci-orion: EHCI orion driver

orion-ehci orion-ehci.0: EHCI Host Controller

orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1

orion-ehci orion-ehci.0: irq 18, io mem 0xf1050000

orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

usbcore: registered new interface driver usb-storage

i2c /dev entries driver

rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0

lm75 0-0048: hwmon1: sensor 'lm75'

md: linear personality registered for level -1

md: raid0 personality registered for level 0

md: raid1 personality registered for level 1

md: raid6 personality registered for level 6

md: raid5 personality registered for level 5

md: raid4 personality registered for level 4

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

TCP: cubic registered

NET: Registered protocol family 17

input: gpio-keys as /devices/platform/gpio-keys/input/input0

usb 1-1: new high-speed USB device number 2 using orion-ehci

ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133

ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)

ata1.00: configured for UDMA/133

scsi 0:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5

sd 0:0:0:0: Attached scsi generic sg0 type 0

sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)

sd 0:0:0:0: [sda] 4096-byte physical blocks

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

 sda: sda1 sda2

sd 0:0:0:0: [sda] Attached SCSI disk

ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133

ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)

ata2.00: configured for UDMA/133

scsi 1:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5

sd 1:0:0:0: Attached scsi generic sg1 type 0

sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)

sd 1:0:0:0: [sdb] 4096-byte physical blocks

sd 1:0:0:0: [sdb] Write Protect is off

sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

 sdb: sdb1 sdb2

sd 1:0:0:0: [sdb] Attached SCSI disk

md: Skipping autodetection of RAID arrays. (raid=autodetect will force)

RAMDISK: squashfs filesystem found at block 0

RAMDISK: Loading 6291KiB [1 disk] into ram disk... done.

VFS: Mounted root (squashfs filesystem) readonly on device 1:0.

Freeing unused kernel memory: 156K (c03ed000 - c0414000)

Adding 524284k swap on /dev/sda1.  Priority:1 extents:1 across:524284k

md: bind<sda2>

Adding 524284k swap on /dev/sdb1.  Priority:1 extents:1 across:524284k

md: bind<sdb2>

md/raid1:md0: active with 2 out of 2 mirrors

created bitmap (22 pages) for device md0

md0: bitmap initialized from disk: read 2 pages, set 0 of 44705 bits

md0: detected capacity change from 0 to 3000054923264

 md0: unknown partition table

random: nonblocking pool is initialized

mv643xx_eth_port mv643xx_eth_port.0 eth0: link down

EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)

mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled

usb 1-1: USB disconnect, device number 2

usb 1-1: new high-speed USB device number 3 using orion-ehci

usb 1-1: USB disconnect, device number 3

Here's dmesg output w/ my Seagate drive:

Booting Linux on physical CPU 0x0

Linux version 3.18.28 (jcard@silver) (gcc version 4.3.3 (GCC) ) #1 Thu Jun 16 15                                                                  :55:06 WEST 2016

CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f

CPU: VIVT data cache, VIVT instruction cache

Machine: D-Link DNS-321/323

Clearing invalid memory bank 0KB@0xffffffff

Clearing invalid memory bank 0KB@0xffffffff

Clearing invalid memory bank 0KB@0xffffffff

Ignoring unrecognised tag 0x00000000

Ignoring unrecognised tag 0x00000000

Ignoring unrecognised tag 0x00000000

Ignoring unrecognised tag 0x41000403

bootconsole [earlycon0] enabled

Memory policy: Data cache writeback

On node 0 totalpages: 16384

free_area_init_node: node 0, pgdat c04376ac, node_mem_map c3f7b000

  Normal zone: 128 pages used for memmap

  Normal zone: 0 pages reserved

  Normal zone: 16384 pages, LIFO batch:3

pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

pcpu-alloc: [0] 0

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256

Kernel command line: console=ttyS0,115200 root=/dev/ram0 init=/init earlyprintk                                                                   root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 54240K/65536K available (3447K kernel code, 143K rwdata, 540K rodata, 15                                                                  6K init, 84K bss, 11296K reserved)

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)

    vmalloc : 0xc4800000 - 0xff000000   ( 936 MB)

    lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)

    modules : 0xbf000000 - 0xc0000000   (  16 MB)

      .text : 0xc0008000 - 0xc03ecf54   (3988 kB)

      .init : 0xc03ed000 - 0xc0414000   ( 156 kB)

      .data : 0xc0414000 - 0xc0437cc0   ( 144 kB)

       .bss : 0xc0437cc0 - 0xc044cf7c   (  85 kB)

NR_IRQS:65

sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns

Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)

pid_max: default: 4096 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

CPU: Testing write buffer coherency: ok

Setting up static identity map for 0x364460 - 0x36449c

xor: measuring software checksum speed

   arm4regs  :   386.000 MB/sec

   8regs     :   336.400 MB/sec

   32regs    :   303.200 MB/sec

xor: using function: arm4regs (386.000 MB/sec)

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

Orion ID: MV88F5182-A2. TCLK=166666667.

DNS-321/323: Identified HW revision C1

initial MPP regs: 00000003 55550000 03ff0000

  final MPP regs: 00000003 55550000 03ff5550

DNS-321/323: Found ethernet MAC address: f0:7d:68:66:ce:d2.

raid6: int32x1     20 MB/s

raid6: int32x2     30 MB/s

raid6: int32x4     39 MB/s

raid6: int32x8     34 MB/s

raid6: using algorithm int32x4 (39 MB/s)

raid6: using intx1 recovery algorithm

SCSI subsystem initialized

libata version 3.00 loaded.

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Switched to clocksource orion_clocksource

NET: Registered protocol family 2

TCP established hash table entries: 1024 (order: 0, 4096 bytes)

TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

TCP: Hash tables configured (established 1024 bind 1024)

TCP: reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

PCI: CLS 0 bytes, default 32

Trying to unpack rootfs image as initramfs...

rootfs image is not initramfs (junk in compressed archive); looks like an initrd

Freeing initrd memory: 6292K (c0800000 - c0e25000)

futex hash table entries: 16 (order: -5, 192 bytes)

VFS: Disk quotas dquot_6.5.2

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

squashfs: version 4.0 (2009/01/31) Phillip Lougher

fuse init (API version 7.23)

aufs 3.18.25+-20160301

msgmni has been set to 118

async_tx: api initialized (async)

io scheduler noop registered

io scheduler cfq registered (default)

Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled

console [ttyS0] disabled

serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 4, base_baud = 10416666) is a 1655                                                                  0A

console [ttyS0] enabled

bootconsole [earlycon0] disabled

brd: module loaded

loop: module loaded

sata_mv sata_mv.0: version 1.28

sata_mv sata_mv.0: cannot get optional clkdev

sata_mv sata_mv.0: slots 32 ports 2

scsi host0: sata_mv

scsi host1: sata_mv

ata1: SATA max UDMA/133 irq 30

ata2: SATA max UDMA/133 irq 30

physmap platform flash device: 00800000 at f4000000

physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x000                                                                  07f Chip ID 0x0000cb

Amd/Fujitsu Extended Query Table at 0x0040

  Amd/Fujitsu Extended Query version 1.1.

number of CFI chips: 1

Creating 5 MTD partitions on "physmap-flash.0":

0x000000000000-0x000000010000 : "MTD1"

0x000000010000-0x000000020000 : "MTD2"

0x000000020000-0x0000001a0000 : "Linux Kernel"

0x0000001a0000-0x0000007d0000 : "File System"

0x0000007d0000-0x000000800000 : "u-boot"

libphy: orion_mdio_bus: probed

mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4

mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address f0:7d:68:66:ce                                                                  :d2

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ehci-pci: EHCI PCI platform driver

ehci-orion: EHCI orion driver

orion-ehci orion-ehci.0: EHCI Host Controller

orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1

orion-ehci orion-ehci.0: irq 18, io mem 0xf1050000

orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

usbcore: registered new interface driver usb-storage

i2c /dev entries driver

rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0

lm75 0-0048: hwmon1: sensor 'lm75'

md: linear personality registered for level -1

md: raid0 personality registered for level 0

md: raid1 personality registered for level 1

md: raid6 personality registered for level 6

md: raid5 personality registered for level 5

md: raid4 personality registered for level 4

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

TCP: cubic registered

NET: Registered protocol family 17

input: gpio-keys as /devices/platform/gpio-keys/input/input0

usb 1-1: new high-speed USB device number 2 using orion-ehci

ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133

ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)

ata1.00: configured for UDMA/133

scsi 0:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5

sd 0:0:0:0: Attached scsi generic sg0 type 0

sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)

sd 0:0:0:0: [sda] 4096-byte physical blocks

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO                                                                   or FUA

 sda: sda1 sda2

sd 0:0:0:0: [sda] Attached SCSI disk

ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133

ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)

ata2.00: configured for UDMA/133

scsi 1:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5

sd 1:0:0:0: Attached scsi generic sg1 type 0

sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)

sd 1:0:0:0: [sdb] 4096-byte physical blocks

sd 1:0:0:0: [sdb] Write Protect is off

sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO                                                                   or FUA

 sdb: sdb1 sdb2

sd 1:0:0:0: [sdb] Attached SCSI disk

md: Skipping autodetection of RAID arrays. (raid=autodetect will force)

RAMDISK: squashfs filesystem found at block 0

RAMDISK: Loading 6291KiB [1 disk] into ram disk... done.

VFS: Mounted root (squashfs filesystem) readonly on device 1:0.

Freeing unused kernel memory: 156K (c03ed000 - c0414000)

Adding 524284k swap on /dev/sda1.  Priority:1 extents:1 across:524284k

md: bind<sda2>

Adding 524284k swap on /dev/sdb1.  Priority:1 extents:1 across:524284k

md: bind<sdb2>

md/raid1:md0: active with 2 out of 2 mirrors

created bitmap (22 pages) for device md0

md0: bitmap initialized from disk: read 2 pages, set 0 of 44705 bits

md0: detected capacity change from 0 to 3000054923264

 md0: unknown partition table

random: nonblocking pool is initialized

mv643xx_eth_port mv643xx_eth_port.0 eth0: link down

EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)

mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow                                                                   control disabled

usb 1-1: USB disconnect, device number 2

usb 1-1: new high-speed USB device number 3 using orion-ehci

usb 1-1: USB disconnect, device number 3

usb 1-1: new high-speed USB device number 4 using orion-ehci

I hope this help. 

[Gabriel Paré-Olivier]

I'm still looking for a solution to this issue. I really like RC5, but I may have to downgrade to RC4.1 if there's no solution to this problem.

Here are my ls usb outputs :

lsusb

Bus 001 Device 004: ID 0bc2:3312 Seagate RSS LLC

lsusb -vt

1-1:1.0: No such file or directory

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=orion-ehci/1p, 480M

    |__ Port 1: Dev 4, If 0, Class=stor., Driver=, 480M

lsusb -v

Bus 001 Device 004: ID 0bc2:3312 Seagate RSS LLC

Device Descriptor:

  bLength                18

  bDescriptorType         1

  bcdUSB               2.10

  bDeviceClass            0 (Defined at Interface level)

  bDeviceSubClass         0

  bDeviceProtocol         0

  bMaxPacketSize0        64

  idVendor           0x0bc2 Seagate RSS LLC

  idProduct          0x3312

  bcdDevice            7.39

  iManufacturer           1 Seagate

  iProduct                2 Expansion Desk

  iSerial                 3 NA4N8P21

  bNumConfigurations      1

  Configuration Descriptor:

    bLength                 9

    bDescriptorType         2

    wTotalLength           85

    bNumInterfaces          1

    bConfigurationValue     1

    iConfiguration          0

    bmAttributes         0xc0

      Self Powered

    MaxPower                2mA

Device Status:     0x0001

  Self Powered

Again, any help or hint is greatly appreciated!

[João Cardoso]

On Thursday, 15 September 2016 12:41:31 UTC+1, Gabriel Paré-Olivier wrote:

I'm still looking for a solution to this issue. I really like RC5, but I may have to downgrade to RC4.1 if there's no solution to this problem.

I don't have a solution. The disk is not detected by the linux kernel, so there is nothing one can do.

The lsusb command probably queries the USB bus directly, so it can find the disk.

[gmk...@googlemail.com]

Joao,

I think I have the same problem with a Seagate-Backup-HubBK-01 external USB disk. The device works flawlessly with eg an Odroid C2 with kernel 3.14, my Fritzbox and my PC with Ubuntu 16.4 LTS. Just the kernel revision in RC5 seems to cause the problem. Would it be possible to update to another kernel?

Best regards,

Markus

[João Cardoso]

On Tuesday, 13 December 2016 10:17:39 UTC, gmkede wrote:

Joao,

I think I have the same problem with a Seagate-Backup-HubBK-01 external USB disk. The device works flawlessly with eg an Odroid C2 with kernel 3.14, my Fritzbox and my PC with Ubuntu 16.4 LTS. Just the kernel revision in RC5 seems to cause the problem. Would it be possible to update to another kernel?

I'm currently using/trying  linux-4.4.22, but of course I don't know if it will work with these drives.

Notice that all reported issues under this topic come from Seagate drives...

[João Cardoso]

On Tuesday, 13 December 2016 15:15:20 UTC, João Cardoso wrote:

On Tuesday, 13 December 2016 10:17:39 UTC, gmkede wrote:

Joao,

I think I have the same problem with a Seagate-Backup-HubBK-01 external USB disk. The device works flawlessly with eg an Odroid C2 with kernel 3.14, my Fritzbox and my PC with Ubuntu 16.4 LTS. Just the kernel revision in RC5 seems to cause the problem. Would it be possible to update to another kernel?

I'm currently using/trying  linux-4.4.22, but of course I don't know if it will work with these drives.

A report for RC6 shows the issue is still occurring.

From this bug report, and this, a possible workaround will be to add to /etc/modprobe.conf, before plugging the USB drive:

options usb-storage quirks=0bc2:02312:u

with the 0bc2:02312 value replaced with the value reported by 'lsusb' for your particular drive (you have to install the 'usbutils' Alt-F package for that).

Reported under this topic are vendorId:productid such as 0bc2:2312 and 0bc2:3312, others (mostly Seagate) seems to suffer from the same issue.

 

Does that works for you?

I'm pondering removing UAS for the next release.