DNS-323 rev-A1 no higher RC3 revisions firmware flashing works!!!
90 views
Skip to first unread message
desigabri
Feb 14, 2015, 9:35:17 AM2/14/15
to
Hi all, I have a trouble for DNS-323 rev-A1: I've 3 of them and
starting from RC4 it was impossible for me to upgrade the firmware.
Actually I'm forced to use the RC3 and always worked for me the older
revisions too.
I only tried the firmware without really flashing it, tried directly and tried after the special reboot. I have olso 3 DNS-323 rev-B1 and the upgrade always worked on them as for the RC4, so for the RC4.1; The ugrade always worked on my DNS-325 too, up to the latest RC4.1
Until now I waited the next revision after the RC4 thinking it could be a temporary trouble and I've never found similar issue in the forum or in the bug list. But now, because I still continue meeting this trouble, I'm trying to ask to you about it.
After the firmware upgrade the NAS receive the IP, and the ping works fine, but it isn't accessible neither by http, neither trought telnet, so I'm not able to understand what is the trouble. I only think that the services don't start regulary.
The hdd blue leds are on and the ethernet blue led is working, and I'm able to shout down the nas pushing the start button and releasing it just when the second yellow led starts to flash, after that the first yellows led have flashed too.
I'll apreciate any help
I only tried the firmware without really flashing it, tried directly and tried after the special reboot. I have olso 3 DNS-323 rev-B1 and the upgrade always worked on them as for the RC4, so for the RC4.1; The ugrade always worked on my DNS-325 too, up to the latest RC4.1
Until now I waited the next revision after the RC4 thinking it could be a temporary trouble and I've never found similar issue in the forum or in the bug list. But now, because I still continue meeting this trouble, I'm trying to ask to you about it.
After the firmware upgrade the NAS receive the IP, and the ping works fine, but it isn't accessible neither by http, neither trought telnet, so I'm not able to understand what is the trouble. I only think that the services don't start regulary.
The hdd blue leds are on and the ethernet blue led is working, and I'm able to shout down the nas pushing the start button and releasing it just when the second yellow led starts to flash, after that the first yellows led have flashed too.
I'll apreciate any help
João Cardoso
Feb 14, 2015, 2:52:09 PM2/14/15
to al...@googlegroups.com
On Saturday, February 14, 2015 at 2:35:17 PM UTC, desigabri wrote:
Hi all, I have a trouble for DNS-323 rev-A1: I've 3 of them and starting from RC4 it was impossible for me to upgrade the firmware. Actually I'm forced to use the RC3 and always worked for me the older revisions too.
I only tried the firmware without really flashing it, tried directly and tried after the special reboot. I have olso 3 DNS-323 rev-B1 and the upgrade always worked on them as for the RC4, so for the RC4.1; The ugrade always worked on my DNS-325 too, up to the latest RC4.1
Until now I waited the next revision after the RC4 thinking it could be a temporary trouble
There has been a kernel upgrade between RC3 and RC4, that might be the issue. I have a 323-rev-B1 myself, but there are no 323-rev-A1 negative reports.
and I've never found similar issue in the forum or in the bug list. But now, because I still continue meeting this trouble, I'm trying to ask to you about it.
After the firmware upgrade the NAS receive the IP, and the ping works fine, but it isn't accessible neither by http, neither trought telnet,
Does Samba works?
so I'm not able to understand what is the trouble. I only think that the services don't start regulary.
Probably. But then Samba should work.
The hdd blue leds are on and the ethernet blue led is working, and I'm able to shout down the nas pushing the start button and releasing it just when the second yellow led starts to flash, after that the first yellows led have flashed too.
So Alt-F is working. You are probably right, it must be a inetd service start issue.
Some file on disk or on flash-memory might be conflicting.
While in RC3 Start saving a copy of settings to your computer, System->Settings, use the Download button
1-clear settings, System->Settings->ClearSettings, then TryIt RC4.1;
2-if the above didn't work, boot the box without disks attached, then TryIt RC4.1
Worked? which one?
-If 1 alone worked you have to fix the settings file before Uploading the saved one to the box,
-if it was 2 that worked you have to fix the offending file on the disk.
desigabri
Feb 14, 2015, 7:38:34 PM2/14/15
to
Hi Joao,
It worked in the 2 way but let me write something about the steps:
- I forgot to check if SAMBA worked (sorry)
1) Just resetting the system setting DIDN'T worked, the results were exactly like the previous mine
2) I tried pulling out the two disks (the system settings were resetted before so I haven't resetted them again), And Tryedit!!! the RC4.1
It rebooted into RC4.1 revision :) :) :) and I needed skipping the config because without disks it stucked in a configuration page.
The firmware looked to be working well, so I Flashed it and rebooted.
It rebooted againg right, so I powered it off, and inserted the disks.
But after having powered it on, it showed to have again the unwanted issue so I couldn't access it another time.
I pulled out the disks and rebooted and the firmware started working correctly.
At start it asked to me to insert the new password two times but I was sure to have done it the previus time, so I inserted it and SAVED the configuration. I powered it down and inserted the disks and powerd it on again.
IT WORKED!
I think that something that is detected during the boot WITHOUT the disks NEED TO BE INSERTED INTO THE CONFIGURATION, may be that if not, the detection of the disks happens earlier than something else and the startup breaks some services.
This means that IF I reset the system config then I'll loose it again and I need to pull out the disks to boot without them and saving the settings.
ANYWAY MANY MANY THANKS I FINALLY HAVE THEM WORKING with RC4.1 (I haven't tried the RC4 but I thing it could have the same problem).
Thanks for your work
It worked in the 2 way but let me write something about the steps:
- I forgot to check if SAMBA worked (sorry)
1) Just resetting the system setting DIDN'T worked, the results were exactly like the previous mine
2) I tried pulling out the two disks (the system settings were resetted before so I haven't resetted them again), And Tryedit!!! the RC4.1
It rebooted into RC4.1 revision :) :) :) and I needed skipping the config because without disks it stucked in a configuration page.
The firmware looked to be working well, so I Flashed it and rebooted.
It rebooted againg right, so I powered it off, and inserted the disks.
But after having powered it on, it showed to have again the unwanted issue so I couldn't access it another time.
I pulled out the disks and rebooted and the firmware started working correctly.
At start it asked to me to insert the new password two times but I was sure to have done it the previus time, so I inserted it and SAVED the configuration. I powered it down and inserted the disks and powerd it on again.
IT WORKED!
I think that something that is detected during the boot WITHOUT the disks NEED TO BE INSERTED INTO THE CONFIGURATION, may be that if not, the detection of the disks happens earlier than something else and the startup breaks some services.
This means that IF I reset the system config then I'll loose it again and I need to pull out the disks to boot without them and saving the settings.
ANYWAY MANY MANY THANKS I FINALLY HAVE THEM WORKING with RC4.1 (I haven't tried the RC4 but I thing it could have the same problem).
Thanks for your work
desigabri
Feb 14, 2015, 7:47:31 PM2/14/15
to al...@googlegroups.com
System Configuration
====================== Alt-F 0.1RC4.1 ======================
Sun Feb 15 00:14:23 NONE 2015
====================== BOARD ======================
DNS-323-A1
====================== CPU ======================
processor : 0
model name : Feroceon rev 0 (v5l)
BogoMIPS : 331.77
Features : swp half fastmult edsp
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant : 0x0
CPU part : 0x926
CPU revision : 0
Hardware : D-Link DNS-321/323
Revision : 0000
Serial : 0000000000000000
====================== Flashed Firmware ======================
Alt-F-0.1RC4.1, kernel 3.10.32
====================== DMESG ======================
Clearing invalid memory bank 0KB@0xffffffff
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c0432658, node_mem_map c0448000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16384 pages, LIFO batch:3
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200 root=/dev/ram0 init=/init root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 54240k/54240k available, 11296k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc03e6f64 (3964 kB)
.init : 0xc03e7000 - 0xc040db3c ( 155 kB)
.data : 0xc040e000 - 0xc0432d80 ( 148 kB)
.bss : 0xc0432d80 - 0xc0447de4 ( 85 kB)
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc0360408 - 0xc0360444
xor: measuring software checksum speed
arm4regs : 360.400 MB/sec
8regs : 323.200 MB/sec
32regs : 287.600 MB/sec
xor: using function: arm4regs (360.400 MB/sec)
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Orion ID: MV88F5181-Rev-B1. TCLK=166666667.
DNS-321/323: Identified HW revision A1
initial MPP regs: 00000000 00000000 00000000
final MPP regs: 00000000 00000000 00000000
DNS-321/323: Found ethernet MAC address: xx:xx:xx:7f:a3:c1.
Applying Orion-1/Orion-NAS PCIe config read transaction workaround
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [11ab:5181] type 00 class 0x058000
pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
pci 0000:00:00.0: reg 18: [mem 0x00000000-0x03ffffff]
pci 0000:00:01.0: [11ab:7042] type 00 class 0x010000
pci 0000:00:01.0: reg 10: [mem 0x40000000-0x400fffff 64bit]
pci 0000:00:01.0: reg 18: [io 0xf0000000-0xf00000ff]
PCI: bus0: Fast back to back transfers disabled
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
pci 0000:01:00.0: [11ab:5181] type 00 class 0x058000
pci 0000:01:00.0: reg 10: [mem 0x00000000-0x03ffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0x10000000-0x1fffffff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xf1000000-0xf10fffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
PCI: bus1: Fast back to back transfers enabled
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
pci 0000:00:01.0: BAR 2: assigned [io 0x1000-0x10ff]
bio: create slab at 0
raid6: int32x1 20 MB/s
raid6: int32x2 30 MB/s
raid6: int32x4 39 MB/s
raid6: int32x8 34 MB/s
raid6: using algorithm int32x4 (39 MB/s)
raid6: using intx1 recovery algorithm
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 32 bytes, default 32
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Freeing initrd memory: 6304K (c0800000 - c0e28000)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 ok...@monad.swb.de).
aufs 3.10.x-20140127
msgmni has been set to 118
async_tx: api initialized (async)
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
sata_mv 0000:00:01.0: version 1.28
sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
scsi0 : sata_mv
scsi1 : sata_mv
scsi2 : sata_mv
scsi3 : sata_mv
ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 11
ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 11
ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 11
ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 11
physmap platform flash device: 00800000 at f4000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 5 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000010000 : "MTD1"
0x000000010000-0x000000020000 : "MTD2"
0x000000020000-0x0000001a0000 : "Linux Kernel"
0x0000001a0000-0x0000007d0000 : "File System"
0x0000007d0000-0x000000800000 : "u-boot"
libphy: orion_mdio_bus: probed
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address xx:xx:xx:7f:a3:c1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-orion: EHCI orion driver
orion-ehci orion-ehci.0: EHCI Host Controller
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
i2c /dev entries driver
rtc-m41t80 0-0068: chip found, driver version 0.05
rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0
lm75 0-0048: hwmon1: sensor 'lm75'
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
input: gpio-keys as /devices/platform/gpio-keys/input/input0
rtc-m41t80 0-0068: setting system clock to 2015-02-15 00:14:01 UTC (1423959241)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133
ata2.00: 586114704 sectors, multi 0: LBA48 NCQ (not used)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Maxtor 6L300S0 BANC PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 6302KiB [1 disk] into ram disk... | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / done.
VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
Freeing unused kernel memory: 152K (c03e7000 - c040d000)
mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
usbcore: registered new interface driver usblp
====================== SYSLOG ======================
Feb 15 00:14:15 dns323 syslog.info syslogd started: BusyBox v1.20.2
Feb 15 00:14:15 dns323 user.notice kernel: klogd started: BusyBox v1.20.2 (2015-01-30 16:18:45 WET)
Feb 15 00:14:15 dns323 user.warn kernel: Clearing invalid memory bank 0KB@0xffffffff
Feb 15 00:14:15 dns323 user.warn kernel: Ignoring unrecognised tag 0x00000000
Feb 15 00:14:15 dns323 user.warn kernel: Ignoring unrecognised tag 0x41000403
Feb 15 00:14:15 dns323 user.warn kernel: Memory policy: ECC disabled, Data cache writeback
Feb 15 00:14:15 dns323 user.debug kernel: On node 0 totalpages: 16384
Feb 15 00:14:15 dns323 user.debug kernel: free_area_init_node: node 0, pgdat c0432658, node_mem_map c0448000
Feb 15 00:14:15 dns323 user.debug kernel: Normal zone: 128 pages used for memmap
Feb 15 00:14:15 dns323 user.debug kernel: Normal zone: 0 pages reserved
Feb 15 00:14:15 dns323 user.debug kernel: Normal zone: 16384 pages, LIFO batch:3
Feb 15 00:14:15 dns323 user.debug kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Feb 15 00:14:15 dns323 user.notice root: Starting syslogd: OK. Starting klogd: OK.
Feb 15 00:14:15 dns323 user.debug kernel: pcpu-alloc: [0] 0
Feb 15 00:14:15 dns323 user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Feb 15 00:14:15 dns323 user.notice kernel: Kernel command line: console=ttyS0,115200 root=/dev/ram0 init=/init root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
Feb 15 00:14:15 dns323 user.info kernel: PID hash table entries: 256 (order: -2, 1024 bytes)
Feb 15 00:14:15 dns323 user.info kernel: Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Feb 15 00:14:15 dns323 user.info kernel: Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Feb 15 00:14:15 dns323 user.info kernel: Memory: 64MB = 64MB total
Feb 15 00:14:15 dns323 user.notice kernel: Memory: 54240k/54240k available, 11296k reserved, 0K highmem
Feb 15 00:14:15 dns323 user.notice kernel: Virtual kernel memory layout:
Feb 15 00:14:15 dns323 user.notice kernel: vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Feb 15 00:14:15 dns323 user.notice kernel: fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Feb 15 00:14:15 dns323 user.notice kernel: vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
Feb 15 00:14:15 dns323 user.notice kernel: lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
Feb 15 00:14:15 dns323 user.notice kernel: modules : 0xbf000000 - 0xc0000000 ( 16 MB)
Feb 15 00:14:15 dns323 user.notice kernel: .text : 0xc0008000 - 0xc03e6f64 (3964 kB)
Feb 15 00:14:15 dns323 user.notice kernel: .init : 0xc03e7000 - 0xc040db3c ( 155 kB)
Feb 15 00:14:15 dns323 user.notice kernel: .data : 0xc040e000 - 0xc0432d80 ( 148 kB)
Feb 15 00:14:15 dns323 user.notice kernel: .bss : 0xc0432d80 - 0xc0447de4 ( 85 kB)
Feb 15 00:14:15 dns323 user.info kernel: NR_IRQS:64
Feb 15 00:14:15 dns323 user.info kernel: sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Feb 15 00:14:15 dns323 user.info kernel: Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
Feb 15 00:14:15 dns323 user.info kernel: pid_max: default: 4096 minimum: 301
Feb 15 00:14:15 dns323 user.info kernel: Mount-cache hash table entries: 512
Feb 15 00:14:15 dns323 user.info kernel: CPU: Testing write buffer coherency: ok
Feb 15 00:14:15 dns323 user.info kernel: Setting up static identity map for 0xc0360408 - 0xc0360444
Feb 15 00:14:15 dns323 user.info kernel: xor: measuring software checksum speed
Feb 15 00:14:15 dns323 user.info kernel: arm4regs : 360.400 MB/sec
Feb 15 00:14:15 dns323 user.info kernel: 8regs : 323.200 MB/sec
Feb 15 00:14:15 dns323 user.info kernel: 32regs : 287.600 MB/sec
Feb 15 00:14:15 dns323 user.info kernel: xor: using function: arm4regs (360.400 MB/sec)
Feb 15 00:14:15 dns323 user.info kernel: NET: Registered protocol family 16
Feb 15 00:14:15 dns323 user.info kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Feb 15 00:14:15 dns323 user.info kernel: Orion ID: MV88F5181-Rev-B1. TCLK=166666667.
Feb 15 00:14:15 dns323 user.info kernel: DNS-321/323: Identified HW revision A1
Feb 15 00:14:15 dns323 user.debug kernel: initial MPP regs: 00000000 00000000 00000000
Feb 15 00:14:15 dns323 user.debug kernel: final MPP regs: 00000000 00000000 00000000
Feb 15 00:14:15 dns323 user.warn kernel: DNS-321/323: Found ethernet MAC address: xx:xx:xx:7f:a3:c1.
Feb 15 00:14:15 dns323 user.notice kernel: Applying Orion-1/Orion-NAS PCIe config read transaction workaround
Feb 15 00:14:15 dns323 user.info kernel: PCI host bridge to bus 0000:00
Feb 15 00:14:15 dns323 user.info kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
Feb 15 00:14:15 dns323 user.info kernel: pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
Feb 15 00:14:15 dns323 user.info kernel: pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:00:00.0: [11ab:5181] type 00 class 0x058000
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:00:00.0: reg 18: [mem 0x00000000-0x03ffffff]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:00:01.0: [11ab:7042] type 00 class 0x010000
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:00:01.0: reg 10: [mem 0x40000000-0x400fffff 64bit]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:00:01.0: reg 18: [io 0xf0000000-0xf00000ff]
Feb 15 00:14:15 dns323 user.info kernel: PCI: bus0: Fast back to back transfers disabled
Feb 15 00:14:15 dns323 user.debug kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Feb 15 00:14:15 dns323 user.info kernel: PCI host bridge to bus 0000:01
Feb 15 00:14:15 dns323 user.info kernel: pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
Feb 15 00:14:15 dns323 user.info kernel: pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff]
Feb 15 00:14:15 dns323 user.info kernel: pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:01:00.0: [11ab:5181] type 00 class 0x058000
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:01:00.0: reg 10: [mem 0x00000000-0x03ffffff 64bit pref]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:01:00.0: reg 18: [mem 0x10000000-0x1fffffff 64bit pref]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:01:00.0: reg 20: [mem 0xf1000000-0xf10fffff 64bit]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:01:00.0: reg 30: [mem 0xe0000000-0xe7ffffff pref]
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:01:00.0: supports D1 D2
Feb 15 00:14:15 dns323 user.debug kernel: pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
Feb 15 00:14:15 dns323 user.info kernel: PCI: bus1: Fast back to back transfers enabled
Feb 15 00:14:15 dns323 user.debug kernel: pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Feb 15 00:14:15 dns323 user.info kernel: pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
Feb 15 00:14:15 dns323 user.info kernel: pci 0000:00:01.0: BAR 2: assigned [io 0x1000-0x10ff]
Feb 15 00:14:15 dns323 user.info kernel: bio: create slab at 0
Feb 15 00:14:15 dns323 user.warn kernel: raid6: int32x1 20 MB/s
Feb 15 00:14:15 dns323 user.warn kernel: raid6: int32x2 30 MB/s
Feb 15 00:14:15 dns323 user.warn kernel: raid6: int32x4 39 MB/s
Feb 15 00:14:15 dns323 user.warn kernel: raid6: int32x8 34 MB/s
Feb 15 00:14:15 dns323 user.warn kernel: raid6: using algorithm int32x4 (39 MB/s)
Feb 15 00:14:15 dns323 user.warn kernel: raid6: using intx1 recovery algorithm
Feb 15 00:14:15 dns323 user.notice kernel: SCSI subsystem initialized
Feb 15 00:14:15 dns323 user.debug kernel: libata version 3.00 loaded.
Feb 15 00:14:15 dns323 user.info kernel: usbcore: registered new interface driver usbfs
Feb 15 00:14:15 dns323 user.info kernel: usbcore: registered new interface driver hub
Feb 15 00:14:15 dns323 user.info kernel: usbcore: registered new device driver usb
Feb 15 00:14:15 dns323 user.info kernel: Switching to clocksource orion_clocksource
Feb 15 00:14:15 dns323 user.info kernel: NET: Registered protocol family 2
Feb 15 00:14:15 dns323 user.info kernel: TCP established hash table entries: 512 (order: 0, 4096 bytes)
Feb 15 00:14:15 dns323 user.info kernel: TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Feb 15 00:14:15 dns323 user.info kernel: TCP: Hash tables configured (established 512 bind 512)
Feb 15 00:14:15 dns323 user.info kernel: TCP: reno registered
Feb 15 00:14:15 dns323 user.info kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
Feb 15 00:14:15 dns323 user.info kernel: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Feb 15 00:14:15 dns323 user.info kernel: NET: Registered protocol family 1
Feb 15 00:14:15 dns323 user.info kernel: RPC: Registered named UNIX socket transport module.
Feb 15 00:14:15 dns323 user.info kernel: RPC: Registered udp transport module.
Feb 15 00:14:15 dns323 user.info kernel: RPC: Registered tcp transport module.
Feb 15 00:14:15 dns323 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Feb 15 00:14:15 dns323 user.debug kernel: PCI: CLS 32 bytes, default 32
Feb 15 00:14:15 dns323 user.info kernel: Trying to unpack rootfs image as initramfs...
Feb 15 00:14:15 dns323 user.info kernel: rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Feb 15 00:14:15 dns323 user.info kernel: Freeing initrd memory: 6304K (c0800000 - c0e28000)
Feb 15 00:14:15 dns323 user.notice kernel: VFS: Disk quotas dquot_6.5.2
Feb 15 00:14:15 dns323 user.warn kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 15 00:14:15 dns323 user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Feb 15 00:14:15 dns323 user.info kernel: Installing knfsd (copyright (C) 1996 ok...@monad.swb.de).
Feb 15 00:14:15 dns323 user.info kernel: aufs 3.10.x-20140127
Feb 15 00:14:15 dns323 user.info kernel: msgmni has been set to 118
Feb 15 00:14:15 dns323 user.info kernel: async_tx: api initialized (async)
Feb 15 00:14:15 dns323 user.info kernel: io scheduler noop registered
Feb 15 00:14:15 dns323 user.info kernel: io scheduler cfq registered (default)
Feb 15 00:14:15 dns323 user.info kernel: Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Feb 15 00:14:15 dns323 user.info kernel: serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
Feb 15 00:14:15 dns323 user.notice root: Starting sslcert: OK.
Feb 15 00:14:15 dns323 user.info kernel: console [ttyS0] enabled
Feb 15 00:14:15 dns323 user.info kernel: brd: module loaded
Feb 15 00:14:15 dns323 user.info kernel: loop: module loaded
Feb 15 00:14:15 dns323 user.debug kernel: sata_mv 0000:00:01.0: version 1.28
Feb 15 00:14:15 dns323 user.info kernel: sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
Feb 15 00:14:15 dns323 user.info kernel: scsi0 : sata_mv
Feb 15 00:14:15 dns323 user.info kernel: scsi1 : sata_mv
Feb 15 00:14:15 dns323 user.info kernel: scsi2 : sata_mv
Feb 15 00:14:15 dns323 user.info kernel: scsi3 : sata_mv
Feb 15 00:14:15 dns323 user.info kernel: ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 11
Feb 15 00:14:15 dns323 user.info kernel: ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 11
Feb 15 00:14:15 dns323 user.info kernel: ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 11
Feb 15 00:14:15 dns323 user.info kernel: ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 11
Feb 15 00:14:15 dns323 user.notice kernel: physmap platform flash device: 00800000 at f4000000
Feb 15 00:14:15 dns323 user.info kernel: physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
Feb 15 00:14:15 dns323 user.info kernel: Amd/Fujitsu Extended Query Table at 0x0040
Feb 15 00:14:15 dns323 user.info kernel: Amd/Fujitsu Extended Query version 1.3.
Feb 15 00:14:15 dns323 user.notice kernel: number of CFI chips: 1
Feb 15 00:14:15 dns323 user.notice kernel: Creating 5 MTD partitions on "physmap-flash.0":
Feb 15 00:14:15 dns323 user.notice kernel: 0x000000000000-0x000000010000 : "MTD1"
Feb 15 00:14:15 dns323 user.notice kernel: 0x000000010000-0x000000020000 : "MTD2"
Feb 15 00:14:15 dns323 user.notice kernel: 0x000000020000-0x0000001a0000 : "Linux Kernel"
Feb 15 00:14:15 dns323 user.notice kernel: 0x0000001a0000-0x0000007d0000 : "File System"
Feb 15 00:14:15 dns323 user.notice kernel: 0x0000007d0000-0x000000800000 : "u-boot"
Feb 15 00:14:15 dns323 user.info kernel: libphy: orion_mdio_bus: probed
Feb 15 00:14:15 dns323 user.notice kernel: mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
Feb 15 00:14:15 dns323 user.notice kernel: mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address xx:xx:xx:7f:a3:c1
Feb 15 00:14:15 dns323 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 15 00:14:15 dns323 user.info kernel: ehci-pci: EHCI PCI platform driver
Feb 15 00:14:15 dns323 user.info kernel: ehci-orion: EHCI orion driver
Feb 15 00:14:15 dns323 user.info kernel: orion-ehci orion-ehci.0: EHCI Host Controller
Feb 15 00:14:15 dns323 user.info kernel: orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Feb 15 00:14:15 dns323 user.info kernel: orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
Feb 15 00:14:15 dns323 user.info kernel: orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Feb 15 00:14:15 dns323 user.info kernel: hub 1-0:1.0: USB hub found
Feb 15 00:14:15 dns323 user.info kernel: hub 1-0:1.0: 1 port detected
Feb 15 00:14:15 dns323 user.info kernel: usbcore: registered new interface driver usb-storage
Feb 15 00:14:15 dns323 user.info kernel: i2c /dev entries driver
Feb 15 00:14:15 dns323 user.info kernel: rtc-m41t80 0-0068: chip found, driver version 0.05
Feb 15 00:14:15 dns323 user.info kernel: rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0
Feb 15 00:14:15 dns323 user.info kernel: lm75 0-0048: hwmon1: sensor 'lm75'
Feb 15 00:14:15 dns323 user.info kernel: md: linear personality registered for level -1
Feb 15 00:14:15 dns323 user.info kernel: md: raid0 personality registered for level 0
Feb 15 00:14:15 dns323 user.info kernel: md: raid1 personality registered for level 1
Feb 15 00:14:15 dns323 user.info kernel: md: raid6 personality registered for level 6
Feb 15 00:14:15 dns323 user.info kernel: md: raid5 personality registered for level 5
Feb 15 00:14:15 dns323 user.info kernel: md: raid4 personality registered for level 4
Feb 15 00:14:15 dns323 user.info kernel: usbcore: registered new interface driver usbhid
Feb 15 00:14:15 dns323 user.info kernel: usbhid: USB HID core driver
Feb 15 00:14:15 dns323 user.info kernel: TCP: cubic registered
Feb 15 00:14:15 dns323 user.info kernel: NET: Registered protocol family 17
Feb 15 00:14:15 dns323 user.info kernel: input: gpio-keys as /devices/platform/gpio-keys/input/input0
Feb 15 00:14:15 dns323 user.info kernel: rtc-m41t80 0-0068: setting system clock to 2015-02-15 00:14:01 UTC (1423959241)
Feb 15 00:14:15 dns323 user.info kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 15 00:14:15 dns323 user.info kernel: ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Feb 15 00:14:15 dns323 user.info kernel: ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Feb 15 00:14:15 dns323 user.info kernel: ata1.00: configured for UDMA/133
Feb 15 00:14:15 dns323 user.notice kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Feb 15 00:14:15 dns323 user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 15 00:14:15 dns323 user.notice kernel: sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 15 00:14:15 dns323 user.notice kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
Feb 15 00:14:15 dns323 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Feb 15 00:14:15 dns323 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 15 00:14:15 dns323 user.notice kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 15 00:14:15 dns323 user.info kernel: sda: unknown partition table
Feb 15 00:14:15 dns323 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 15 00:14:15 dns323 user.info kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 15 00:14:15 dns323 user.info kernel: ata2.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133
Feb 15 00:14:15 dns323 user.info kernel: ata2.00: 586114704 sectors, multi 0: LBA48 NCQ (not used)
Feb 15 00:14:15 dns323 user.info kernel: ata2.00: configured for UDMA/133
Feb 15 00:14:15 dns323 user.notice kernel: scsi 1:0:0:0: Direct-Access ATA Maxtor 6L300S0 BANC PQ: 0 ANSI: 5
Feb 15 00:14:15 dns323 user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Feb 15 00:14:15 dns323 user.notice kernel: sd 1:0:0:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB)
Feb 15 00:14:15 dns323 user.notice kernel: sd 1:0:0:0: [sdb] Write Protect is off
Feb 15 00:14:15 dns323 user.debug kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Feb 15 00:14:15 dns323 user.notice kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 15 00:14:15 dns323 user.info kernel: sdb: unknown partition table
Feb 15 00:14:15 dns323 user.notice kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Feb 15 00:14:15 dns323 user.info kernel: ata3: SATA link down (SStatus 0 SControl 300)
Feb 15 00:14:15 dns323 user.info kernel: ata4: SATA link down (SStatus 0 SControl 300)
Feb 15 00:14:15 dns323 user.info kernel: md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
Feb 15 00:14:15 dns323 user.notice kernel: RAMDISK: squashfs filesystem found at block 0
Feb 15 00:14:15 dns323 user.notice kernel: RAMDISK: Loading 6302KiB [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H
Feb 15 00:14:15 dns323 user.info kernel: VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
Feb 15 00:14:15 dns323 user.info kernel: Freeing unused kernel memory: 152K (c03e7000 - c040d000)
Feb 15 00:14:15 dns323 user.info kernel: mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
Feb 15 00:14:15 dns323 user.info kernel: mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
Feb 15 00:14:15 dns323 user.notice root: Starting urandom: OK.
Feb 15 00:14:15 dns323 daemon.info sysctrl: Starting
Feb 15 00:14:15 dns323 daemon.info sysctrl: reading /etc/bay
Feb 15 00:14:15 dns323 daemon.info sysctrl: reading /etc/misc.conf
Feb 15 00:14:15 dns323 daemon.info sysctrl: reading /etc/sysctrl.conf
Feb 15 00:14:15 dns323 daemon.info sysctrl: can't open /etc/sysctrl.conf: No such file or directory Using defaults
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.lo_fan=2000
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.hi_fan=5000
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.lo_temp=40
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.hi_temp=50
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.hist_temp=1.0
Feb 15 00:14:15 dns323 user.notice root: Starting sysctrl: OK.
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.fan_mode=AUTO
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.mail=1
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.recovery=1
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.fan_off_temp=38
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.max_fan_speed=6000
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.crit_temp=54
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.warn_temp=52
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.crit_temp_command="/usr/sbin/poweroff"
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.warn_temp_command="(null)"
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.front_button_command1="(null)"
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.front_button_command2="(null)"
Feb 15 00:14:15 dns323 daemon.info sysctrl: args.back_button_command="(null)"
Feb 15 00:14:15 dns323 daemon.info sysctrl: sdb left rdwr=0 last=0 spindow=1200 power=1
Feb 15 00:14:15 dns323 daemon.info sysctrl: sda right rdwr=0 last=0 spindow=1200 power=1
Feb 15 00:14:15 dns323 daemon.info sysctrl: (null) (null) rdwr=0 last=0 spindow=1200 power=1
Feb 15 00:14:15 dns323 cron.info crond[442]: crond: crond (busybox 1.20.2) started, log level 8
Feb 15 00:14:15 dns323 user.notice root: Starting crond: OK. Starting news: OK.
Feb 15 00:14:16 dns323 user.info kernel: usbcore: registered new interface driver usblp
Feb 15 00:14:16 dns323 user.notice root: Starting inetd: OK.
Feb 15 00:14:16 dns323 daemon.info sysctrl: temp=46.0 pwm=127 fan=3840
Feb 15 00:14:22 dns323 user.notice root: Starting nmbd: OK. Starting smbd: OK.
Feb 15 00:14:22 dns323 user.notice root: Starting ffp: No ffp instalation found.
====================== BOOTLOG ======================
Feb 15 00:14:06 syslogd started: BusyBox v1.20.2
Feb 15 00:14:06 rcS: Reading RCT in UTC and setting system time and date
Feb 15 00:14:06 rcS: Board: DNS-323-A1
Feb 15 00:14:06 rcS: Flashed Firmware: Alt-F-0.1RC4.1, kernel 3.10.32
Feb 15 00:14:07 rcS: loadsave_settings: loaded set_2015-02-15_00:11:09.tgz settings file.
Feb 15 00:14:10 rcS: IP from flash-defaults
Feb 15 00:14:11 udhcpc: Deconfiguring eth0
Feb 15 00:14:14 udhcpc: Renew: Using 192.168.201.220 for 43200 seconds
Feb 15 00:14:14 udhcpc: Updating /etc/hosts: 192.168.201.220 dns323.lan dns323
Feb 15 00:14:14 udhcpc: Updating /etc/httpd.conf: allow 192.168.201.0/255.255.255.0
Feb 15 00:14:14 udhcpc: Updating /etc/samba/smb.conf: allow 192.168.201.0/255.255.255.0
Feb 15 00:14:14 udhcpc: Updating eth0 default route: adding route 192.168.201.1
Feb 15 00:14:14 udhcpc: Updating /etc/resolv.conf: adding nameserver 192.168.201.1
Feb 15 00:14:15 syslogd exiting
====================== IFCONFIG ======================
eth0 Link encap:Ethernet HWaddr xx:xx:xx:7F:A3:C1
inet addr:192.168.201.220 Bcast:192.168.201.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3215 (3.1 KiB) TX bytes:11271 (11.0 KiB)
Interrupt:21
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
====================== ROUTE ======================
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.201.1 0.0.0.0 UG 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
192.168.201.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
====================== RESOLVER ======================
search lan
nameserver 192.168.201.1
====================== HOSTS ======================
127.0.0.1 localhost
192.168.201.220 dns323.lan dns323
====================== DISKS (MBR) ======================
Disk /dev/sda: 243201 cylinders, 255 heads, 63 sectors/track
No partitions found
Disk /dev/sdb: 36483 cylinders, 255 heads, 63 sectors/track
No partitions found
====================== DISKS (GPT) ======================
Creating new GPT entries.
Disk /dev/sda: 3907029168 sectors, 1.8 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): A2F2B785-E44E-4450-91C5-9358A6A4D739
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 3907029134
Partitions will be aligned on 2048-sector boundaries
Total free space is 3907029101 sectors (1.8 TiB)
Number Start (sector) End (sector) Size Code Name
Creating new GPT entries.
Disk /dev/sdb: 586114704 sectors, 279.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 0FD212C8-A0D6-40F1-B670-6009B596BA1F
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 586114670
Partitions will be aligned on 2048-sector boundaries
Total free space is 586114637 sectors (279.5 GiB)
Number Start (sector) End (sector) Size Code Name
====================== BLOCKID ======================
/dev/mtdblock0: TYPE="minix"
/dev/loop0: TYPE="squashfs"
/dev/mtdblock1: TYPE="minix"
====================== RAID ======================
Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4]
unused devices:
====================== SWAP ======================
Filename Type Size Used Priority
====================== MOUNT ======================
rootfs / rootfs rw 0 0
tmpfs /rootmnt tmpfs rw,relatime 0 0
/rootmnt/dev/loop0 /rootmnt/ro squashfs ro,relatime 0 0
aufs / aufs rw,relatime,si=e13ba6b9 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
tmpfs /tmp tmpfs rw,relatime 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
====================== FS ======================
Filesystem Size Used Available Use% Mounted on
rootfs 29.6M 316.0K 29.3M 1% /
tmpfs 29.6M 316.0K 29.3M 1% /rootmnt
/rootmnt/dev/loop0 6.3M 6.3M 0 100% /rootmnt/ro
aufs 29.6M 316.0K 29.3M 1% /
tmpfs 29.6M 540.0K 29.1M 2% /tmp
====================== AUFS ======================
aufs on / type aufs (rw,relatime,si=e13ba6b9)
/rootmnt/rw=rw
/rootmnt/ro=rr
====================== SERVICES ======================
root: user stopped.
root: ffp stopped
root: vsftpd stopped
root: dropbear stopped
root: smbd running
root: rpc.statd stopped
root: nfsd stopped
root: inadyn-mt stopped
root: ntpd stopped
root: dnsmasq stopped
root: stunnel stopped
root: inetd running
root: portmap stopped
root: news running
root: cleanup stopped
root: backup stopped
root: mdadm stopped
root: smartd stopped
root: atd stopped
root: crond running
root: sysctrl running
root: urandom stopped
root: sslcert stopped.
root: syslogd running
====================== TOP ======================
Mem: 26420K used, 34276K free, 0K shrd, 5532K buff, 11876K cached
CPU: 4% usr 47% sys 0% nic 47% idle 0% io 0% irq 0% sirq
Load average: 0.51 0.11 0.04 2/50 851
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
849 645 root R 1188 2% 5% top -bn1
628 1 root S 10432 17% 0% smbd -D
675 628 root S 10432 17% 0% smbd -D
607 1 root S 7932 13% 0% nmbd -D
646 639 root S 1212 2% 0% sed s/..:..:..\(:..:..:..\)/xx:xx:xx\1/
406 1 root S 1212 2% 0% syslogd -C -m 0 -D
645 639 root S 1212 2% 0% {S99user} /bin/sh /etc/init.d/S99user start
639 402 root S 1212 2% 0% {S99user} /bin/sh /etc/init.d/S99user start
850 484 root D 1200 2% 0% httpd -ifh /usr/www
77 1 root S 1196 2% 0% {rcS} /bin/sh /etc/init.d/rcS
347 1 root S 1196 2% 0% udhcpc -R -b -p /var/run/udhcpc.eth0.pid -i eth0 -x hostname dns323
1 0 root S 1192 2% 0% init
484 1 root D 1192 2% 0% inetd
402 77 root S 1192 2% 0% {rcall} /bin/sh /sbin/rcall start
442 1 root S 1192 2% 0% crond
409 1 root S 1180 2% 0% klogd
425 1 root S 592 1% 0% sysctrl
15 2 root SW 0 0% 0% [kworker/0:1]
66 2 root SW< 0 0% 0% [kworker/0:1H]
64 2 root SW< 0 0% 0% [loop0]
3 2 root SW 0 0% 0% [ksoftirqd/0]
611 2 root SW 0 0% 0% [kworker/0:2]
37 2 root SW 0 0% 0% [kworker/u2:2]
38 2 root SW 0 0% 0% [kworker/u2:3]
40 2 root SW 0 0% 0% [kworker/u2:5]
6 2 root SW 0 0% 0% [kworker/u2:0]
32 2 root SW 0 0% 0% [scsi_eh_0]
33 2 root SW 0 0% 0% [scsi_eh_1]
10 2 root SW< 0 0% 0% [kblockd]
16 2 root SW 0 0% 0% [kswapd0]
14 2 root SW< 0 0% 0% [rpciod]
11 2 root SW< 0 0% 0% [ata_sff]
18 2 root SW< 0 0% 0% [nfsiod]
19 2 root SW< 0 0% 0% [crypto]
34 2 root SW 0 0% 0% [scsi_eh_2]
35 2 root SW 0 0% 0% [scsi_eh_3]
49 2 root SW< 0 0% 0% [deferwq]
17 2 root SW 0 0% 0% [fsnotify_mark]
13 2 root SW< 0 0% 0% [md]
39 2 root SW 0 0% 0% [kworker/u2:4]
36 2 root SW 0 0% 0% [kworker/u2:1]
12 2 root SW 0 0% 0% [khubd]
50 2 root SW 0 0% 0% [kworker/u2:6]
4 2 root SW 0 0% 0% [kworker/0:0]
5 2 root SW< 0 0% 0% [kworker/0:0H]
2 0 root SW 0 0% 0% [kthreadd]
7 2 root SW< 0 0% 0% [khelper]
8 2 root SW< 0 0% 0% [writeback]
9 2 root SW< 0 0% 0% [bioset]
====================== FREE ======================
total used free shared buffers
Mem: 60696 26488 34208 0 5532
-/+ buffers: 20956 39740
Swap: 0 0 0
João Cardoso
Feb 15, 2015, 9:23:26 AM2/15/15
to al...@googlegroups.com
On Sunday, February 15, 2015 at 12:38:34 AM UTC, desigabri wrote:
Hi Joao,
It worked in the 2 way but let me write something about the steps:
Thanks a lot for the detailed and at the same time synthetic procedure description! Having accurate feedback on how issues are/aren't solved is important.
- I forgot to check if SAMBA worked (sorry)
That's the only missing piece of information
1) Just resetting the system setting DIDN'T worked, the results were exactly like the previous mine
2) I tried pulling out the two disks (the system settings were resetted before so I haven't resetted them again), And Tryedit!!! the RC4.1
It rebooted into RC4.1 revision :) :) :) and I needed skipping the config because without disks it stucked in a configuration page.
The firmware looked to be working well, so I Flashed it and rebooted.
It rebooted againg right, so I powered it off, and inserted the disks.
But after having powered it on, it showed to have again the unwanted issue so I couldn't access it another time.
I pulled out the disks and rebooted and the firmware started working correctly.
At start it asked to me to insert the new password two times but I was sure to have done it the previus time, so I inserted it and SAVED the configuration. I powered it down and inserted the disks and powerd it on again.
IT WORKED!
I think that something that is detected during the boot WITHOUT the disks NEED TO BE INSERTED INTO THE CONFIGURATION, may be that if not, the detection of the disks happens earlier than something else and the startup breaks some services.
This issue must be related with settings files found on disk shadowing the ones from the firmware/flash memory. This is required but under certain circumstances can cause problems.
This means that IF I reset the system config then I'll loose it again and I need to pull out the disks to boot without them and saving the settings.
I thing that now it must be fixed. The configuration file that was causing the issue must now be also correct on disk.
ANYWAY MANY MANY THANKS I FINALLY HAVE THEM WORKING with RC4.1 (I haven't tried the RC4 but I thing it could have the same problem).
Thanks for your work
Il giorno sabato 14 febbraio 2015 20:52:09 UTC+1, João Cardoso ha scritto:
Reply all
Reply to author
Forward
0 new messages