Form1 for sale

[Komissar8]

Hi All, I'm selling my Form1 3D printer (one of the first 4 to ship to BC from the kickstarter campaign). It works really great, never had any issues and still looks very clean. However life issues have gotten in the way paired with the fact that I haven't used it in 8 months. This made me realize that it shouldn't sit here doing nothing -- while there are others out there craving to get their hands on one. I'm giving anyone who is interested in a form1 3D printer; first kick at the can. Get in touch with me and I can answer your questions, thanks.

[Max Hynes]

I am. How much are you asking for?

On Fri, Aug 21, 2015 at 7:48 PM, Komissar8 <komi...@gmail.com> wrote:

Hi All, I'm selling my Form1 3D printer (one of the first 4 to ship to BC from the kickstarter campaign). It works really great, never had any issues and still looks very clean. However life issues have gotten in the way paired with the fact that I haven't used it in 8 months. This made me realize that it shouldn't sit here doing nothing -- while there are others out there craving to get their hands on one. I'm giving anyone who is interested in a form1 3D printer; first kick at the can. Get in touch with me and I can answer your questions, thanks.

--
You received this message because you are subscribed to the Google Groups "3D604" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d604+un...@googlegroups.com.
To post to this group, send email to 3d...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d604/1c777f58-17db-4c5c-9f92-d617c98e6fc0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Ian Smith]

If you haven't sold it, let me know. Ian
I...@pureluck.ca

[Komissar8]

I've received lots of feedback and it looks like $2800.00 USD is the new price for the whole kit.

I should have listed what you get when you buy:
x1 Form1 3d printer
x1 Resin tank original (needs new optical layer)

x1 Redin tank new
x1 Build platform original still clean and level

x1 Build platform new

x1 Form finish kit (the original kit version with one rinse tank)
x2 Unopened White Resin bottles 1L ea.

[Komissar8]

Ok Ian, but if I can add my two cents... I used to be very concerned about build area, the larger the better. What can you do with a small build area? Well I was pleasantly surprised with the form1. I was able to print many small parts, all clustered vertically and horizontally within the tiny build "volume." And then assembled them into a much larger component; the accuracy with the form1 is really impressive. The largest I've made to date is 38cm L x 18cm W x 10cm ht. I know even larger can be accomplished. Build volume is the key...

--

Komissar8

On Wednesday, September 2, 2015 at 10:07:37 AM UTC-7, Ian Smith wrote:

Now that I have seen how small the build area is, I'm not interested. Thank you for the updates.

On September 2, 2015 10:00:23 AM PDT, Komissar8 <komi...@gmail.com> wrote:

I've lowered the price to $2200.00 US.

On Friday, August 21, 2015 at 7:48:37 PM UTC-7, Komissar8 wrote:

Hi All, I'm selling my Form1 3D printer (one of the first 4 to ship to BC from the kickstarter campaign). It works really great, never had any issues and still looks very clean. However life issues have gotten in the way paired with the fact that I haven't used it in 8 months. This made me realize that it shouldn't sit here doing nothing -- while there are others out there craving to get their hands on one. I'm giving anyone who is interested in a form1 3D printer; first kick at the can. Get in touch with me and I can answer your questions, thanks.

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.

[Komissar8]

Hi All, my Form1 is still available. Please let anyone you think might be interested in buying to email me. I'll sell lower to someone identifying themselves through this group than I'm showing on Craigslist. Thanks again for spreading the word.

On Friday, August 21, 2015 at 7:48:37 PM UTC-7, Komissar8 wrote:

[Max Hynes]

Hello! My makerspace may be intreasted.

--

You received this message because you are subscribed to the Google Groups "3D604" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d604+un...@googlegroups.com.
To post to this group, send email to 3d...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/3d604/19babd2e-6df2-45b9-9c0b-ece7d0ff82ae%40googlegroups.com.

[Komissar8]

Great, just let me know how you want to proceed. Where are you located?

 

Regards,

Charles

--
You received this message because you are subscribed to a topic in the Google Groups "3D604" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/3d604/v1RB7VKDOpY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to 3d604+un...@googlegroups.com.

To post to this group, send email to 3d...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/3d604/CAHg_q4KJ8UfdnusiAZ_c%3DeX0rC5-U5h6iVJ2Jcc%3Df1Y-xptb6A%40mail.gmail.com.

[Max Hynes]

I dont own the makerspace, but we are located in West Vancvouver.

To view this discussion on the web visit https://groups.google.com/d/msgid/3d604/!%26!AAAAAAAAAAAYAAAAAAAAABvF/bYpwyBOlx0I3ntNry3CgAAAEAAAAJ8CwSE7wIFKlqRNtV22CcUBAAAAAA%3D%3D%40gmail.com.

[Max Hynes]

ZenMakerLab

[Julian Rendell]

Have you upgraded this to the form 1+, or is this still the original?

(I just realized they're up to their third generation!)

Does their latest preform software version still support this model?

Thanks!

Julian

--

[Komissar8]

Hi Julian, my printer is the original version. I haven’t upgraded because there were way too many negative comments from users who had problems after. It prints accurately and I’ve never had any failed prints. The latest Preform 1.9.1 version works for all models no exceptions. All prints emerge as expected and are impressive every time.

 

Regards,

Charles

 

From: 3d...@googlegroups.com [mailto:3d...@googlegroups.com] On Behalf Of Julian Rendell
Sent: October-04-15 10:40 AM
To: 3d...@googlegroups.com
Subject: Re: Form1 for sale

 

Have you upgraded this to the form 1+, or is this still the original?

--
You received this message because you are subscribed to a topic in the Google Groups "3D604" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/3d604/v1RB7VKDOpY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to 3d604+un...@googlegroups.com.

To post to this group, send email to 3d...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/3d604/A31D786C-C140-45C9-A1B4-8AC36D3BB492%40gmail.com.