Studio B back online

[Max Kratzok]

The studio B pair of wires (circled) were shorting out. 

This may have been “good enough” at the time… but if you do things right the first time (ie cut your wires to an appropriate length so they don’t short!) it’ll save weeks of frustration down the road! 

Also, the poorly tinned end of the left wire broke off and jammed that port. I trimmed and restripped both wires and shifted the pair to #7 and just like that, Studio B is back. Magic!

Yours sincerely, (and with a deep sense of relief now that (almost) all is right in the world), 

Mellow Max

P.S. All I want for Hanukkah is a nice wire stripper for the station… or maybe two… they’re only $10! https://a.co/d/bLLhhhv

[Nick Andre]

This may have been me in 2015 🤣 although I think Jesse made the strip a few years prior 😜

--
You received this message because you are subscribed to the Google Groups "wmfo-ops" group.
To unsubscribe from this group and stop receiving emails from it, send an email to wmfo-ops+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/wmfo-ops/66F616BB-091B-4021-970B-471CFFA90A84%40wmfo.org.

[Max Kratzok]

Hahaha well, if they lasted for over a decade then I take it back! I probably would’ve done a similar job when I was in college, but I’ve created enough similar shorts at work that I’ve learned my lesson 😅 

On Dec 11, 2025, at 9:53 PM, 'Nick Andre' via wmfo-ops <wmfo...@googlegroups.com> wrote:



To view this discussion visit https://groups.google.com/d/msgid/wmfo-ops/CABiK%3DdbysH%3DzCZ4PzMUiRw8w2czaPojcNHtdqaXPyj2LKonTwg%40mail.gmail.com.

[enoesque]

Hawt damn!!  Thank you!!

To view this discussion visit https://groups.google.com/d/msgid/wmfo-ops/9AE0E143-183C-4BD4-A404-737AF66970DC%40wmfo.org.