Interceptor - GW1000u with TX60 - Data format

[Johnny H]

Hi team,

So much learning here. Thanks.

I'm receiving data into my rpi weewx from my gw1000u (I had to make up my serial number - took a while to find that little gem).

Also uploading to pwsweather OK - however my data isn't what I expect.

The tx60 only has sensor temp, probe temp and humidity(in %) - pwsweather see's that as wind.

Any ideas how I map the data field somewhere I'm guessing?

Dec  2 20:33:48 raspiwifi weewx[10186]: interceptor: MainThread: unhandled data len=46 (01642102a46e0728620726262626262626262626262ba0)

Dec  2 20:33:48 raspiwifi weewx[10186]: manager: Added record 2019-12-02 20:00:00 AEDT (1575277200) to database 'weewx.sdb'

Dec  2 20:33:48 raspiwifi weewx[10186]: manager: Added record 2019-12-02 20:00:00 AEDT (1575277200) to daily summary in 'weewx.sdb'

Dec  2 20:33:50 raspiwifi weewx[10186]: restx: PWSWeather: Published record 2019-12-02 20:00:00 AEDT (1575277200)

Another interceptor:

interceptor: MainThread: unhandled data len=46 (01643102a46e032763052626262626262626262626696c)

Hope thats all you need?
I'm expecting something like Sensor temp = 17c, probe temp 21c and humidity 63%   - rough guide for what I'm hoping that data string contains?

Thanks again - some amazing people, and projects here

Johnny

[Johnny H]

Some more data I've managed to work out how to get:

Also here's my upload location for the data - you'll see the data coming through as wind and not the 2 temp's I'm expecting.

https://www.pwsweather.com/obs/RIVERSIDETAS.html

root@Ready:/usr/share/weewx# /etc/init.d/weewx status -l

● weewx.service - LSB: weewx weather system

   Loaded: loaded (/etc/init.d/weewx; generated; vendor preset: enabled)

   Active: failed (Result: exit-code) since Fri 2019-12-06 08:52:04 AEDT; 21min ago

     Docs: man:systemd-sysv-generator(8)

  Process: 4056 ExecStop=/etc/init.d/weewx stop (code=exited, status=1/FAILURE)

   CGroup: /system.slice/weewx.service

           └─2935 python /usr/bin/weewxd --daemon --pidfile=/var/run/weewx.pid /etc/weewx/weewx.conf

Dec 06 09:13:08 Ready weewx[2935]: interceptor: ServerThread: send: 70:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0

Dec 06 09:13:10 Ready weewx[2935]: interceptor: ServerThread: recv: 01:00 8007BF1D D100C3ADE5553AED 01 64 11 02 a4

Dec 06 09:13:10 Ready weewx[2935]: interceptor: ServerThread: send: 14:01 01 7f ff 01 02 00 50 76 77 00 32 00 0b 00 00 00 0f 00 00 00 00 00 00 00 09 13 10 06 12 19 53 01 03 00 00 00 03 c6

Dec 06 09:13:13 Ready weewx[2935]: interceptor: ServerThread: recv: 00:70 8007BF1D D100C3ADE5553AED

Dec 06 09:13:13 Ready weewx[2935]: interceptor: ServerThread: send: 70:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0

Dec 06 09:13:16 Ready weewx[2935]: interceptor: MainThread: empty queue

Dec 06 09:13:26 Ready weewx[2935]: interceptor: MainThread: empty queue

Dec 06 09:13:36 Ready weewx[2935]: interceptor: MainThread: empty queue

Dec 06 09:13:46 Ready weewx[2935]: interceptor: MainThread: empty queue

Dec 06 09:13:56 Ready weewx[2935]: interceptor: MainThread: empty queue

[mwall]

On Monday, December 2, 2019 at 8:31:59 PM UTC-5, Johnny H wrote:

I'm receiving data into my rpi weewx from my gw1000u (I had to make up my serial number - took a while to find that little gem).

Also uploading to pwsweather OK - however my data isn't what I expect.

The tx60 only has sensor temp, probe temp and humidity(in %) - pwsweather see's that as wind.

Any ideas how I map the data field somewhere I'm guessing?

hi johnny,

please post:

1) your weewx configuration file

2) the log (typically /var/syslog) from just before weewx starts until about 10 minutes of weewx running

m