HP2000 7-In-1 Ultra

[Andre]

I'm not sure but is weewx supporting a Frogit HP2000 7-In-1 Ultra weather station? Which driver supports all sensors?

[michael.k...@gmx.at]

The interceptor driver with ecowitt protocol, see https://github.com/matthewwall/weewx-interceptor/blob/master/bin/user/interceptor.py

Or you get an additional GW2000 or GW3000 and use the ecowitt gateway driver https://github.com/gjr80/weewx-gw1000

[Rainer Lang]

I don't think the Interceptor driver in its pre-diluvial state will do the job here - I suggest to get the up-to-date version of it from (see below)

You will need to use the original interceptor driver installation whose driver will not show you your rain data, as the dinosaur-version doesn't recognize a WS90/DP1100 sensor array.
Get it up and running, even with a reduced number of sensors to make sure it works in principle.

And then get two files from here:
https://www.pc-wetterstation.de/weewx/usr/share/weewx/user/interceptor.zip
and
https://www.pc-wetterstation.de/weewx/usr/share/weewx/user/extensions.zip
unpack them
and copy both files into the .../weewx/user directory (path depending on your installation method)
replacing the existing interceptor.py and extensions.py files

then you will have a fully fledged Interceptor driver experience and can use all existing Ecowitt sensors (the DP2000 7-in-1 ultra is an Ecowitt HP2564 station with a WS90, just relabeled) you may later want to add.
You will of course have to edit your skin.conf for more sensor graphics and data to be displayed.

An additional GW1100/1200/2000/3000 is not needed but can turn out to be useful - and be it as an hardware backup.
The GW3000 has the charme that not only data can be saved regularly to an SD card but the data is also network retrievable - and the still to-be-published local Ecowitt API driver in version 7.0 should be able to use these data to backfill data weewx may have missed due to unwanted/unforeseen downtime

Good luck

--
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/weewx-user/60c2f58d-4bdb-43d3-be3c-9fb39bb6ec8dn%40googlegroups.com.

[Andre]

First of all, thank you Rainer for the feedback. If what you describe is the latest version of the HP2000 weather station, why is this version not in the official weewx Github? Don't get me wrong, I generally like it when solutions are offered by the community. Are you the developer?

[Rainer Lang]

I am not the developer but a user of the (extended) Interceptor driver - the base developer is Matthew Wall (but only for the basic sensors and not the piezo sensors nor other Ecowitt sensors) and the extended version was created by a German developer who adapted Matthew's code (basically the field map) and who owns the website of that link mentioned earlier and is himself the developer of a German weather software. He cannot simply add his addition to Matthews code on GitHub. Such are the rules. Matthew would have to do this himself. As he didn't do this so far, the only solution is what I wrote earlier ...

To view this discussion visit https://groups.google.com/d/msgid/weewx-user/9dd2391d-96b2-42df-9e30-c994c4f875ben%40googlegroups.com.

[Charles Hill]

Can someone unsubscribe me because unsubscribe does not work.

To view this discussion visit https://groups.google.com/d/msgid/weewx-user/4e486958-dbed-4107-b0cc-1f50ca14f633%40gmail.com.

[gjr80]

What do you want to be unsubscribed from? At the moment your address is subscribed to 'each email', so you will get an email each time a post is made to the group. I can change that to a 'digest' (I think it's daily/every 25 posts) or 'abridged' or 'no email'. If you want to just unsubscribe from this thread I can't help with that.

Gary