Acurite 01019M weewx compatable?

[dhimelic]

I have a Acurite 01019M weather station and purchased a Nooelec nesdr mini usb rtl-sdr & Ads-B receiver set. I am using a Raspberry Pi 3 mode b running Debian. Trying to upload my weather data to Weatherunderground. Is the 01019M compatible with the Nooelec nesdr? I don't see it on the hardware list and it doesn't seem to be working? My AcuRite smart hub has reached its end of life and weewx seemed to give me hope! Any advice?

pi@raspberrypi:~ $ sudo tail -f /var/log/syslog
Dec 18 16:20:08 raspberrypi kernel: [ 22.544652] logitech-hidpp-device 0003:046D:400E.0005: HID++ 2.0 device connected.
Dec 18 16:20:08 raspberrypi dhcpcd[385]: wlan0: no IPv6 Routers available
Dec 18 16:20:31 raspberrypi systemd-timesyncd[292]: Timed out waiting for reply from 198.50.238.156:123 (2.debian.pool.ntp.org).
Dec 18 16:20:53 raspberrypi systemd[1]: Time has been changed
Dec 18 16:20:53 raspberrypi systemd-timesyncd[292]: Synchronized to time server 206.55.191.142:123 (2.debian.pool.ntp.org).
Dec 18 16:20:53 raspberrypi systemd[1]: apt-daily-upgrade.timer: Adding 54min 14.193243s random time.
Dec 18 16:20:53 raspberrypi systemd[526]: Time has been changed
Dec 18 16:20:53 raspberrypi systemd[1]: apt-daily.timer: Adding 9h 42min 39.182788s random time.
Dec 18 16:35:53 raspberrypi systemd[1]: Starting Cleanup of Temporary Directories...
Dec 18 16:35:53 raspberrypi systemd[1]: Started Cleanup of Temporary Directories

[rich T]

Did you review this:

https://github.com/weewx/weewx/wiki/sdr-rpi-recipe

You be able to receive the data from the 5 n1 sensors, but not pressure if you are using a SDR.

[mwall]

On Wednesday, December 18, 2019 at 6:15:56 PM UTC-5, dhimelic wrote:

I have a Acurite 01019M weather station and purchased a Nooelec nesdr mini usb rtl-sdr & Ads-B receiver set. I am using a Raspberry Pi 3 mode b running Debian. Trying to upload my weather data to Weatherunderground. Is the 01019M compatible with the Nooelec nesdr?

the console is a receiver.  it is the instruments that transmit, and as far as i know, all of the acurite 5n1 instruments use the same wireless protocol, which can be received by the nooelec sdr.

this guide shows how to do it:

https://github.com/weewx/weewx/wiki/sdr-rpi-recipe

 

I don't see it on the hardware list and it doesn't seem to be working? My AcuRite smart hub has reached its end of life and weewx seemed to give me hope! Any advice?

unless you have some kind of hardware failure, the smart hub will work just fine with weewx.  here is an overview:

https://github.com/weewx/weewx/wiki/acuritebridge

i would suggest the weewx-interceptor driver:

https://github.com/matthewwall/weewx-interceptor

see the section 'Example: Acurite Bridge in listen mode' in the readme as a starting point

m