BloomSky SKY2+STORM - No Pressure?

[Rick M0LEP]

I've recently switched my system over to getting data from a BloomSky
SKY2, and all seems to work fine except the pressure, which shows as N/A
(or null) in all the readings I can see in weewx. Looking atthe raw data
from the BloomSky, the pressure is being reported, so I'm guessing
someting in the driver is somehow missing it. Any ideas?

--
73, Rick, M0LEP

[Rick M0LEP]

I think I found what was missing. The release of the BloomSky driver I
was using came from:

https://github.com/gjr80/weewx-bloomsky/releases/download/v0.1.0/bloomsky-0.1.0.tar.gz

However, the git repository contains a more up-to-date driver that
doesn't seem to have made it into the release yet. Getting the latest
copy of bloomsky.py from https://github.com/gjr80/weewx-bloomsky and
installing it manually has cured the problem.

[gjr80]

My apologies, committed the fix but never came back to issue the release. Fixed now in release 0.1.1.

Gary

[Rick M0LEP]

On Wed 29 May gjr80 wrote:
> My apologies, committed the fix but never came back to issue the release.
> Fixed now in release 0.1.1

> <https://github.com/gjr80/weewx-bloomsky/releases>.

Thanks. :)

--
73, Rick, M0LEP

[gjr80]

Just one more thing, when testing the 0.1.1 release I noticed the default polling interval was 60 seconds as per the setup instructions, but the driver was coded with a 120 second default. I changed this to 60 seconds in the 0.1.1 release. Will not have any noticeable affect if you install 0.1.1 and you have poll_interval set under [Bloomsky]; however, if you install 0.1.1 and don't have poll_interval set there will be a change of polling interval from 120 seconds to 60 seconds. Easily fixed by explicitly setting poll_interval.

Gary