I removed the old Squeeze Python2 installation
and installed Debian11 BULLSEYE Python3 after
wget of the requisite python3 weewx.list in /etc/apt/source.list.d/
I can't get archive to run alone so I found and ran wee_reports with station heading renamed to be sure I was using new config.
I am using Ubuntu Studio 23.04 with browser
Brave Version 1.51.118 Chromium: 113.0.5672.126 (Official Build) (64-bit)
The IMAGE VIEWER can't open them either.
Data seems to be 03:10:00 PM from Debian 9 squeeze
Time was 05/19/2023 03:20:00 PM in last html/weewx files
This ran and I didn't see vertical bars until I copied them off the directory.
wee_reports was run at 5:54 PM after above remove, change repo and install.
Never see station data added in syslog grep searches.
cat /var/log/syslog | grep -i weewx
Paste some of returned strings here
May 19 17:54:13 coolsheeva wee_reports[2613] INFO weewx.reportengine: Copied 5 files to /var/www/html/weewx
May 19 17:59:42 coolsheeva wee_device[2631] INFO weewx.drivers.ws23xx: driver version is 0.41
May 19 17:59:42 coolsheeva wee_device[2631] INFO weewx.drivers.ws23xx: serial port is /dev/ttyUSB0
May 19 17:59:42 coolsheeva wee_device[2631] INFO weewx.drivers.ws23xx: polling interval is None
May 19 18:00:24 coolsheeva wee_device[2635] INFO weewx.drivers.ws23xx: driver version is 0.41
May 19 18:00:24 coolsheeva wee_device[2635] INFO weewx.drivers.ws23xx: serial port is /dev/ttyUSB0
May 19 18:00:24 coolsheeva wee_device[2635] INFO weewx.drivers.ws23xx: polling interval is None
ALSO, WEE_REPORTS is doing funky stuff too.
Date incorrect on Day Barometer
Week, Month, Year PNGs
Vertical bars but right date and time of data as 03:10:00 PM