WeeWX 4.0.0 Deb Package install

steeple ian

unread,

May 1, 2020, 6:03:57 AM5/1/20

to weewx-user

Hi,

OS is Raspbian Desktop on a NUC. I have used the various betas right through to build 18 which all ran perfectly with the weewx-SDR driver . I installed the new release using Deb package Pyhton3 and have the following error:

May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     **** 'SDR'
May 1 10:30:09 raspberry weewx[3075]: Starting weewx weather system: weewx.
May 1 10:30:09 raspberry systemd[1]: Started LSB: weewx weather system.
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     **** Traceback (most recent call last):
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     ****    File "/usr/share/weewx/weewxd", line 148, in main
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     ****      engine = weewx.engine.StdEngine(config_dict)
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     ****    File "/usr/share/weewx/weewx/engine.py", line 69, in __init__
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     ****      self.setupStation(config_dict)
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     ****    File "/usr/share/weewx/weewx/engine.py", line 87, in setupStation
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     ****      driver = config_dict[station_type]['driver']
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     ****    File "/usr/lib/python3/dist-packages/configobj.py", line 554, in __getitem__
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     ****      val = dict.__getitem__(self, key)
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     **** KeyError: 'SDR'
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__:     **** Exiting.
May 1 10:30:16 raspberry ntpd[918]: 129.250.35.250 local addr 192.168.1.221 -> <null>
May 1 10:31:05 raspberry systemd[1]: Started Run anacron jobs.
May 1 10:31:05 raspberry anacron[3144]: Anacron 2.3 started on 2020-05-01
May 1 10:31:05 raspberry anacron[3144]: Normal exit (0 jobs run)
May 1 10:31:05 raspberry systemd[1]: anacron.service: Succeeded.
May 1 10:39:01 raspberry CRON[3622]: (root) CMD ( [ -x /usr/lib/php/sessionclean ] && if [ ! -d /run/systemd/system ]; then /usr/lib/php/sessionclean; fi)
May 1 10:39:05 raspberry systemd[1]: Starting Clean php session files...
May 1 10:39:05 raspberry systemd[1]: phpsessionclean.service: Succeeded.
May 1 10:39:05 raspberry systemd[1]: Started Clean php session files.
May 1 10:50:25 raspberry ntpd[918]: 139.162.250.106 local addr 192.168.1.221 -> <null>
May 1 10:50:35 raspberry ntpd[918]: 83.137.225.103 local addr 192.168.1.221 -> <null>

Your help would be much appreciated.

Ian

mwall

unread,

May 1, 2020, 8:47:06 AM5/1/20

to weewx-user

On Friday, May 1, 2020 at 6:03:57 AM UTC-4, steeple ian wrote:

Hi,

OS is Raspbian Desktop on a NUC. I have used the various betas right through to build 18 which all ran perfectly with the weewx-SDR driver . I installed the new release using Deb package Pyhton3 and have the following error:

...

May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__: **** 'SDR'

May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__: **** KeyError: 'SDR'
May 1 10:30:09 raspberry weewx[3091] CRITICAL __main__: **** Exiting.

that looks like there is no 'SDR' section in your weewx.conf, but the station is still set to 'SDR'

when you do a debian upgrade, if you have made any changes to /etc/weewx/weewx.conf, you should be prompted about whether to use the existing weewx.conf or the new one from the install. whichever one you do *not* choose will be saved in /etc/weewx

take a looke in the /etc/weewx directory to see which weewx.conf file is the right one

make a copy of the current /etc/weewx/weewx.conf, then copy the 'right' one to /etc/weewx/weewx.conf

then start weewx

if the installation process removed the 'SDR' section, then that is a bug and we'll need to know the precise steps you took so we can figure out how it happened

m

steeple ian

unread,

May 1, 2020, 9:10:02 AM5/1/20

to weewx...@googlegroups.com

Matthew,

It was a clean install of everything then SDR extension installed and ran wee_config --reconfigure. Edited weewx.conf then restart.

This is my SDR stanza

driver = user.sdr
path = /usr/local/bin
cmd = rtl_433 -f 868M -s 1024k -M utc -F json -R 78

[[sensor_map]]

outTemp = temperature.71.FOWH65BPacket
windSpeed = wind_speed.71.FOWH65BPacket
UV = uv_index.71.FOWH65BPacket
light = light.71.FOWH65BPacket
outBatteryStatus = battery.71.FOWH65BPacket
outHumidity = humidity.71.FOWH65BPacket
windDir = wind_dir.71.FOWH65BPacket
windGust = wind_gust.71.FOWH65BPacket
rain_total = rain_total.71.FOWH65BPacket
inTemp = temperature.233.FOWH32BPacket
inHumidity = humidity.233.FOWH32BPacket
barometer = pressure.233.FOWH32BPacket
inTempBatteryStatus = battery.233.FOWH32BPacket

Ian

--
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1f72913c-9e59-40fe-85e5-7e3b129b0a93%40googlegroups.com.

mwall

unread,

May 1, 2020, 9:12:47 AM5/1/20

to weewx-user

On Friday, May 1, 2020 at 9:10:02 AM UTC-4, steeple ian wrote:

Matthew,
It was a clean install of everything then SDR extension installed and ran wee_config --reconfigure. Edited weewx.conf then restart.

This is my SDR stanza

thanks for that. but the stack trace indicates that there *is* no SDR stanza.

could you post the entire weewx.conf file, with credentials obfuscated?

m

steeple ian

unread,

May 1, 2020, 9:34:59 AM5/1/20

to weewx...@googlegroups.com

Here it is: -

# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2019 Tom Keffer <tke...@gmail.com>
# See the file LICENSE.txt for your rights.

##############################################################################

# This section is for general configuration information.

# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1

# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /

# Whether to log successful operations
log_success = True

# Whether to log unsuccessful operations
log_failure = True

# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20

# Do not modify this. It is used when installing and updating weewx.
version = 4.0.0

##############################################################################

# This section is for information about the station.

[Station]

# Description of the station location
location = The Four Claydons North End

# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 51.940
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -0.987

# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 82, meter

# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = SDR

# If you have a website, you may specify an URL
station_url = https://claydonsweather.org.uk/weewx/weather34

# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1

# Start of week (0=Monday, 6=Sunday)
week_start = 0

##############################################################################

driver = user.sdr
path = /usr/local/bin
cmd = rtl_433 -f 868M -s 1024k -M utc -F json -R 78

[[sensor_map]]

outTemp = temperature.71.FOWH65BPacket
windSpeed = wind_speed.71.FOWH65BPacket
UV = uv_index.71.FOWH65BPacket
light = light.71.FOWH65BPacket
outBatteryStatus = battery.71.FOWH65BPacket
outHumidity = humidity.71.FOWH65BPacket
windDir = wind_dir.71.FOWH65BPacket
windGust = wind_gust.71.FOWH65BPacket
rain_total = rain_total.71.FOWH65BPacket
inTemp = temperature.233.FOWH32BPacket
inHumidity = humidity.233.FOWH32BPacket
barometer = pressure.233.FOWH32BPacket
inTempBatteryStatus = battery.233.FOWH32BPacket

##############################################################################

[Simulator]
# This section is for the weewx weather station simulator

# The time (in seconds) between LOOP packets.
loop_interval = 2.5

# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for testing).
#mode = generator

# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default
# is to use the present time.
#start = 2011-01-01T00:00

# The driver to use:
driver = weewx.drivers.simulator

##############################################################################

# This section is for uploading data to Internet sites

[StdRESTful]

[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = true

[[AWEKAS]]
# This section is for configuring posts to AWEKAS.

# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me

[[CWOP]]
# This section is for configuring posts to CWOP.

# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me

# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)

[[PWSweather]]
# This section is for configuring posts to PWSweather.com.

# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me

[[WOW]]
# This section is for configuring posts to WOW.

# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me

[[Wunderground]]
# This section is for configuring posts to the Weather Underground.

# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me

# If you plan on using wunderfixer, set the following
# to your API key:
api_key = replace_me

# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False

##############################################################################

# This section specifies what reports, using which skins, to generate.

[StdReport]

# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins

# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx

# The database binding indicates which data should be used in reports.
data_binding = wx_binding

# Whether to log a successful operation
log_success = True

# Whether to log an unsuccessful operation
log_failure = False

# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.

[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true

[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone

[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile

[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false

[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp

# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather

# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False

# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx

# Most FTP servers use port 21
port = 21

# Set to 1 to use passive mode, zero for active mode
passive = 1

[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync

# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me

# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx

# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0

####

# Various options for customizing your reports.

[[Defaults]]

[[[Units]]]

# The following section sets what unit to use for each unit group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]

group_altitude = meter # Options are 'foot' or 'meter'
group_degree_day = degree_C_day # Options are 'degree_F_day' or 'degree_C_day'
group_distance = km # Options are 'mile' or 'km'
group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa'
group_rain = mm # Options are 'inch', 'cm', or 'mm'
group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = meter_per_second # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = meter_per_second2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_C # Options are 'degree_F' or 'degree_C'

# The following section sets the formatting for each type of unit.
[[[[StringFormats]]]]

centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km = %.1f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"

# The following section overrides the label used for each type of unit
[[[[Labels]]]]

meter = " meter", " meters" # You may prefer "metre".
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""

# The following section sets the format for each time scale.
# The values below will work in every locale, but they may not look
# particularly attractive.
[[[[TimeFormats]]]]

hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X

[[[[Ordinates]]]]

# Ordinal directions. The last one is for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A

# The following section sets the base temperatures used for the
# calculation of heating, cooling, and growing degree-days.
[[[[DegreeDays]]]]

# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# Base temperature for growing days, with unit:
growing_base = 50, degree_F

# A trend takes a difference across a time period. The following
# section sets the time period, and how big an error is allowed to
# still be counted as the start or end of a period.
[[[[Trend]]]]

time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes

# The labels to be used for each observation type
[[[Labels]]]

# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W

# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f

# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
inHumidity = Inside Humidity
inTemp = Inside Temperature
outHumidity = Humidity
outTemp = Outside Temperature
radiation = Radiation
rain = Rain
rainRate = Rain Rate
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
extraTemp1 = Temperature1
extraTemp2 = Temperature2
extraTemp3 = Temperature3

# Sensor status indicators

rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage

[[[Almanac]]]

# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent
#
############################################################################

[[Weather34Report]]
skin = Weather34
HTML_ROOT = /var/www/html/weewx/weather34/
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_degree_day = degree_C_day
group_pressure = hPa
group_rain = mm
group_rainrate = mm_per_hour
group_speed = meter_per_second
group_speed2 = meter_per_second2
group_temperature = degree_C
#
############################################################################

[[w34Highcharts]]
HTML_ROOT = /var/www/html/weewx/weather34/w34highcharts
skin = w34Highcharts
enable = true
[[[CheetahGenerator]]]
[[[[ToDate]]]]
[[[[[YearJSON]]]]]
stale_age = 600
[[[Units]]]
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = N/A
[[[[Labels]]]]
centibar = cb
cm = cm
cm_per_hour = cm/hr
degree_C = ° C
degree_F = ° F
degree_compass = °
foot = feet
hPa = hPa
inHg = inHg
inch = in
inch_per_hour = in/hr
km_per_hour = km/hr
km_per_hour2 = km/hr
knot = knots
knot2 = knots
mbar = mbar
meter = meters
meter_per_second = m/s
meter_per_second2 = m/s
mile_per_hour = mph
mile_per_hour2 = mph
mm = mm
mmHg = mmHg
mm_per_hour = mm/hr
percent = %
uv_index = Index
volt = V
watt_per_meter_squared = W/m²
NONE = ""
[[[Extras]]]
[[[[MinRange]]]]
outTemp = 10, degree_C
windchill = 10, degree_C
barometer = 20, hPa
windSpeed = 10
rain = 5, mm
radiation = 500
UV = 16
[[[[WindRose]]]]
title = Wind Rose
source = windSpeed
period = 3600, 86400, 604800, month, year
aggregate_type = ""
aggregate_interval = ""
petals = 16
petal_colors = aqua, 0x0099FF, 0x0033FF, 0x009900, 0x00CC00, 0x33FF33, 0xCCFF00
speedfactor = 0.0, 0.1, 0.2, 0.3, 0.5, 0.7, 1.0
legend_title = True
band_percent = True
bullseye_percent = True
precision = 1
bullseye_size = 20
bullseye_color = 0xFFFACD
calm_limit = 0.1

##############################################################################

# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.

[StdConvert]

# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.

# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

# This section can adjust data using calibration expressions.

[StdCalibrate]

[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
radiation = light * 0.007893 if light is not None else None

##############################################################################

# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.

[StdQC]

[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch

##############################################################################

# This section controls the origin of derived values.

[StdWXCalculate]

[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx

pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
beaufort = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware

##############################################################################

# For hardware that supports it, this section controls how often the
# onboard clock gets updated.

[StdTimeSynch]

# How often to check the weather station clock for drift (in seconds)
clock_check = 14400

# How much it can drift before we will correct it (in seconds)
max_drift = 5

##############################################################################

# This section is for configuring the archive service.

[StdArchive]

# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300

# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware

# Whether to include LOOP data in hi/low statistics
loop_hilo = True

# The data binding used to save archive records
data_binding = wx_binding

##############################################################################

# This section binds a data store to a database.

[DataBindings]

[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema

##############################################################################

# This section defines various databases.

[Databases]

# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite

# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL

##############################################################################

# This section defines defaults for the different types of databases.

[DatabaseTypes]

# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx

# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name (quotes guard against parsing errors)
password = weewx

##############################################################################

# This section configures the internal weewx engine.

[Engine]

[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.weather34.Weather34RealTime
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
#
################################################################################

[Weather34RealTime]
filename = /var/www/html/weewx/weather34/w34realtime.txt
unit_system = METRICWX
binding = loop
exclude_fields = rain
"# cache_enable" = False
cache_directory = /tmp
cache_stale_time = 900
#
################################################################################

[Weather34WebServices]
filename = /var/www/html/weewx/weather34/settings1.php

--

You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4fbf8519-da92-4b69-856c-30240275ea0d%40googlegroups.com.

mwall

unread,

May 1, 2020, 9:43:33 AM5/1/20

to weewx-user

On Friday, May 1, 2020 at 9:34:59 AM UTC-4, steeple ian wrote:

Here it is: -

there is no [SDR] stanza in your configuration file

steeple ian

unread,

May 1, 2020, 10:07:22 AM5/1/20

to weewx...@googlegroups.com

Whoops, crimson with embarrassment! I have been looking at that all morning and not seen the wood for the trees.

Sorry to divert your time from more deserving users.

Thanks for the ongoing support for us all.

Ian

--

You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/31a4c37e-4f56-4d48-a266-b0e714859d50%40googlegroups.com.

Reply all

Reply to author

Forward