WS3 /Weewx

[neilobao10]

Good afternoon everyone! I live in Salvador, Bahia, Brazil! I would like to receive help from this group. I have a weather station with the following setup: Orange pi3 LTS, Weewx 5.01, RS232 cable and WS1 ADS! All was well until WS1 presented a problem. So I decided to buy through Allexpress, another WS3 weather station, TTL output and a TTL/USB adapter. I can access through the Terminal, the data of the aforementioned WS3 station without errors at 2400 bau. However, Weewx does not communicate with it, even though it changes the settings for the new WS3 station. As far as I know, Weewx, can't find this WS3 driver! I've searched the net but I haven't found this software.
As I don't have much knowledge in this regard, I ask the group for help and if anyone has already gone through this problem and managed to solve it, explain how they solved it.
I made two prints that maybe, come to exemplify what must be happening! Grateful!

[michael.k...@gmx.at]

Is there even a weewx driver for that station? If not, you're out of luck until there is one. If the WS3 uses the same protocol as the WS1, use the old driver.