Weewx won't update web page
122 views
Skip to first unread message
Darryl
Nov 11, 2022, 6:25:13 PM11/11/22
to weewx-user
System has been running for years with no issue. Recently, during the past few days, won't update the web page. I went to the troubleshooting guide and tried re-setting the Vantage Pro (not Pro 2) console by taking the batteries out and unplugging it from the power supply. BTW - console batteries check good and power supply tests as 5V with no AC ripple.
After a console reset the web page update still did not work so I executed the dump and clear commands per the troubleshooting guide. Still no good.
Then I went into the system log after setting debug=1 and found weewx was "unable to wake up Vantage Console", obviously an issue, and have tried to troubleshoot that.
I'm stuck.
I can go to a terminal window and execute wee_device --info and get a response like this:
pi@raspberrypi:~ $ wee_device --info
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.4.0 (weewx.drivers.vantage)
Unable to wake up Vantage console... sleeping
Unable to wake up Vantage console... retrying
Traceback (most recent call last):
File "/usr/share/weewx/wee_device", line 76, in <module>
main()
File "/usr/share/weewx/wee_device", line 72, in main
device.configure(config_dict)
File "/usr/share/weewx/weewx/drivers/__init__.py", line 67, in configure
self.do_options(options, parser, config_dict, not options.noprompt)
File "/usr/share/weewx/weewx/drivers/vantage.py", line 2117, in do_options
station = Vantage(**config_dict[DRIVER_NAME])
File "/usr/share/weewx/weewx/drivers/vantage.py", line 521, in __init__
self._setup()
File "/usr/share/weewx/weewx/drivers/vantage.py", line 1340, in _setup
self.port.wakeup_console(max_tries=self.max_tries)
File "/usr/share/weewx/weewx/drivers/vantage.py", line 118, in wakeup_console
raise weewx.WakeupError("Unable to wake up Vantage console")
weewx.WakeupError: Unable to wake up Vantage console
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.4.0 (weewx.drivers.vantage)
Unable to wake up Vantage console... sleeping
Unable to wake up Vantage console... retrying
Traceback (most recent call last):
File "/usr/share/weewx/wee_device", line 76, in <module>
main()
File "/usr/share/weewx/wee_device", line 72, in main
device.configure(config_dict)
File "/usr/share/weewx/weewx/drivers/__init__.py", line 67, in configure
self.do_options(options, parser, config_dict, not options.noprompt)
File "/usr/share/weewx/weewx/drivers/vantage.py", line 2117, in do_options
station = Vantage(**config_dict[DRIVER_NAME])
File "/usr/share/weewx/weewx/drivers/vantage.py", line 521, in __init__
self._setup()
File "/usr/share/weewx/weewx/drivers/vantage.py", line 1340, in _setup
self.port.wakeup_console(max_tries=self.max_tries)
File "/usr/share/weewx/weewx/drivers/vantage.py", line 118, in wakeup_console
raise weewx.WakeupError("Unable to wake up Vantage console")
weewx.WakeupError: Unable to wake up Vantage console
Then I try the command again with some success. But notice the console sleeping issue:
Using Vantage driver version 3.4.0 (weewx.drivers.vantage)
Unable to wake up Vantage console... sleeping
Unable to wake up Vantage console... retrying
Querying...
Davis Vantage EEPROM settings:
CONSOLE TYPE: Vantage Pro
CONSOLE FIRMWARE:
Date: Nov 20 2006
Version: <Unavailable>
CONSOLE SETTINGS:
Archive interval: 900 (seconds)
Altitude: 893 (foot)
Wind cup type: large
Rain bucket type: 0.01 inches
Rain year start: 1
Onboard time: 2022-11-11 12:05:31
CONSOLE DISPLAY UNITS:
Barometer: inHg
Temperature: degree_10F
Rain: inch
Wind: mile_per_hour
CONSOLE STATION INFO:
Latitude (onboard): +44.9
Longitude (onboard): -93.5
Use manual or auto DST? AUTO
DST setting: N/A
Use GMT offset or zone code? ZONE_CODE
Time zone code: 6
GMT offset: N/A
Temperature logging: AVERAGE
Retransmit channel: OFF (0) etc., etc......................
Here is a log of the starting of weewx:
Nov 11 12:10:10 raspberrypi systemd[1]: Starting LSB: weewx weather system...
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Initializing weewx version 4.9.1
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Using Python 3.9.2 (default, Mar 12 2021, 04:06:34) #012[GCC 10.2.1 20210110]
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Located at /bin/python3
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Platform Linux-5.15.76-v7+-armv7l-with-glibc2.31
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Locale is 'en_US'
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Using configuration file /etc/weewx/weewx.conf
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Debug is 1
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: PID file is /var/run/weewx.pid
Nov 11 12:10:11 raspberrypi weewx[4130] DEBUG __main__: Initializing engine
Nov 11 12:10:11 raspberrypi weewx[4130] INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage)
Nov 11 12:10:11 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Driver version is 3.4.0
Nov 11 12:10:11 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Option loop_request=1
Nov 11 12:10:11 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00
Nov 11 12:10:11 raspberrypi weewx[4116]: Starting weewx weather system: weewx.
Nov 11 12:10:11 raspberrypi systemd[1]: Started LSB: weewx weather system.
Nov 11 12:10:15 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Wakeup retry #1 failed: Expected to read 2 chars; got 0 instead
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Hardware type is 16
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: ISS ID is 1
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Hardware name: Vantage Pro
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdTimeSynch
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdTimeSynch
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdConvert
Nov 11 12:10:16 raspberrypi weewx[4130] INFO weewx.engine: StdConvert target unit is 0x1
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdConvert
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdCalibrate
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdCalibrate
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdQC
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdQC
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxservices.StdWXCalculate
Nov 11 12:10:16 raspberrypi weewx[4130] INFO weewx.wxservices: StdWXCalculate will use data binding wx_binding
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.manager: Daily summary version is 4.0
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxservices.StdWXCalculate
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdWXXTypes
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdWXXTypes
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdPressureCooker
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdPressureCooker
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdRainRater
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdRainRater
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdDelta
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdDelta
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdArchive
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Archive will use data binding wx_binding
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Record generation will be attempted in 'hardware'
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Using archive interval of 900 seconds (specified by hardware)
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Use LOOP data in hi/low calculations: 1
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdArchive
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdStationRegistry
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: StationRegistry: Registration not requested.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdStationRegistry
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdWunderground
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: Wunderground: Posting not enabled.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdWunderground
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdPWSweather
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: PWSweather: Posting not enabled.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdPWSweather
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdCWOP
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: CWOP: Data for station K0GV will be posted
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdCWOP
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdWOW
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: WOW: Posting not enabled.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdWOW
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdAWEKAS
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: AWEKAS: Posting not enabled.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdPrint
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdReport
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: 'pyephem' detected, extended almanac data is available
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdReport
Nov 11 12:10:17 raspberrypi weewx[4130] INFO __main__: Starting up weewx version 4.9.1
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Clock error is -0.23 seconds (positive is fast)
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Starting backfill of daily summaries
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Daily summaries up to date
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 11:30:00 CST (1668187800)
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.manager: Daily summary version is 4.0
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Retrieving 1 page(s); starting index= 2
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 11:45:00 CST (1668188700) to database 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 11:45:00 CST (1668188700) to daily summary in 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.restx: CWOP: record 2022-11-11 11:45:00 CST (1668188700) is stale (1517 > 600).
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 12:00:00 CST (1668189600) to database 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 12:00:00 CST (1668189600) to daily summary in 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Empty record page 0; index 4
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.restx: CWOP: record 2022-11-11 12:00:00 CST (1668189600) is stale (617 > 600).
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Starting main packet loop.
Nov 11 12:10:21 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Wakeup retry #1 failed: Expected to read 2 chars; got 0 instead
Nov 11 12:10:23 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:23 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Requesting 200 LOOP packets.
Nov 11 12:10:23 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Initializing weewx version 4.9.1
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Using Python 3.9.2 (default, Mar 12 2021, 04:06:34) #012[GCC 10.2.1 20210110]
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Located at /bin/python3
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Platform Linux-5.15.76-v7+-armv7l-with-glibc2.31
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Locale is 'en_US'
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Using configuration file /etc/weewx/weewx.conf
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: Debug is 1
Nov 11 12:10:11 raspberrypi weewx[4127] INFO __main__: PID file is /var/run/weewx.pid
Nov 11 12:10:11 raspberrypi weewx[4130] DEBUG __main__: Initializing engine
Nov 11 12:10:11 raspberrypi weewx[4130] INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage)
Nov 11 12:10:11 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Driver version is 3.4.0
Nov 11 12:10:11 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Option loop_request=1
Nov 11 12:10:11 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00
Nov 11 12:10:11 raspberrypi weewx[4116]: Starting weewx weather system: weewx.
Nov 11 12:10:11 raspberrypi systemd[1]: Started LSB: weewx weather system.
Nov 11 12:10:15 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Wakeup retry #1 failed: Expected to read 2 chars; got 0 instead
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Hardware type is 16
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: ISS ID is 1
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Hardware name: Vantage Pro
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdTimeSynch
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdTimeSynch
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdConvert
Nov 11 12:10:16 raspberrypi weewx[4130] INFO weewx.engine: StdConvert target unit is 0x1
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdConvert
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdCalibrate
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdCalibrate
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdQC
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdQC
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxservices.StdWXCalculate
Nov 11 12:10:16 raspberrypi weewx[4130] INFO weewx.wxservices: StdWXCalculate will use data binding wx_binding
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.manager: Daily summary version is 4.0
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxservices.StdWXCalculate
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdWXXTypes
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdWXXTypes
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdPressureCooker
Nov 11 12:10:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdPressureCooker
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdRainRater
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdRainRater
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdDelta
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdDelta
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdArchive
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Archive will use data binding wx_binding
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Record generation will be attempted in 'hardware'
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Using archive interval of 900 seconds (specified by hardware)
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Use LOOP data in hi/low calculations: 1
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdArchive
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdStationRegistry
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: StationRegistry: Registration not requested.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdStationRegistry
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdWunderground
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: Wunderground: Posting not enabled.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdWunderground
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdPWSweather
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: PWSweather: Posting not enabled.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdPWSweather
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdCWOP
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: CWOP: Data for station K0GV will be posted
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdCWOP
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdWOW
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: WOW: Posting not enabled.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdWOW
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdAWEKAS
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.restx: AWEKAS: Posting not enabled.
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdPrint
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdReport
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: 'pyephem' detected, extended almanac data is available
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdReport
Nov 11 12:10:17 raspberrypi weewx[4130] INFO __main__: Starting up weewx version 4.9.1
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Clock error is -0.23 seconds (positive is fast)
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Starting backfill of daily summaries
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Daily summaries up to date
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 11:30:00 CST (1668187800)
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.manager: Daily summary version is 4.0
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Retrieving 1 page(s); starting index= 2
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 11:45:00 CST (1668188700) to database 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 11:45:00 CST (1668188700) to daily summary in 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.restx: CWOP: record 2022-11-11 11:45:00 CST (1668188700) is stale (1517 > 600).
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 12:00:00 CST (1668189600) to database 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 12:00:00 CST (1668189600) to daily summary in 'weewx.sdb'
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Empty record page 0; index 4
Nov 11 12:10:17 raspberrypi weewx[4130] DEBUG weewx.restx: CWOP: record 2022-11-11 12:00:00 CST (1668189600) is stale (617 > 600).
Nov 11 12:10:17 raspberrypi weewx[4130] INFO weewx.engine: Starting main packet loop.
Nov 11 12:10:21 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Wakeup retry #1 failed: Expected to read 2 chars; got 0 instead
Nov 11 12:10:23 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:10:23 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Requesting 200 LOOP packets.
Nov 11 12:10:23 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Here is a section of log at the failure. It fails, then does some sort of retry. It seems able to talk to the console on the second try. BTW - My CWOP station is updating normally :
Nov 11 12:15:14 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT try #1; error: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT try #2; error: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT try #3; error: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT try #4; error: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT max tries (4) exceeded.
Nov 11 12:15:16 raspberrypi weewx[4130] INFO weewx.engine: Main loop exiting. Shutting engine down.
Nov 11 12:15:16 raspberrypi weewx[4130] DEBUG weewx.restx: Shut down CWOP thread.
Nov 11 12:15:16 raspberrypi weewx[4130] CRITICAL __main__: Caught WeeWxIOError: Max tries exceeded while getting archive data.
Nov 11 12:15:16 raspberrypi weewx[4130] CRITICAL __main__: **** Waiting 60 seconds then retrying...
Nov 11 12:16:16 raspberrypi weewx[4130] INFO __main__: retrying...
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG __main__: Initializing engine
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage)
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Driver version is 3.4.0
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Option loop_request=1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Hardware type is 16
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: ISS ID is 1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Hardware name: Vantage Pro
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdTimeSynch
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdTimeSynch
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdConvert
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: StdConvert target unit is 0x1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdConvert
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdCalibrate
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdCalibrate
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdQC
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdQC
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxservices.StdWXCalculate
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.wxservices: StdWXCalculate will use data binding wx_binding
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.manager: Daily summary version is 4.0
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxservices.StdWXCalculate
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdWXXTypes
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdWXXTypes
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdPressureCooker
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdPressureCooker
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdRainRater
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdRainRater
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdDelta
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdDelta
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdArchive
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Archive will use data binding wx_binding
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Record generation will be attempted in 'hardware'
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Using archive interval of 900 seconds (specified by hardware)
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Use LOOP data in hi/low calculations: 1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdArchive
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdStationRegistry
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: StationRegistry: Registration not requested.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdStationRegistry
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdWunderground
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: Wunderground: Posting not enabled.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdWunderground
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdPWSweather
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: PWSweather: Posting not enabled.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdPWSweather
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdCWOP
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: CWOP: Data for station K0GV will be posted
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdCWOP
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdWOW
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: WOW: Posting not enabled.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdWOW
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdAWEKAS
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: AWEKAS: Posting not enabled.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdPrint
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdReport
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: 'pyephem' detected, extended almanac data is available
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdReport
Nov 11 12:16:16 raspberrypi weewx[4130] INFO __main__: Starting up weewx version 4.9.1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Clock error is 0.09 seconds (positive is fast)
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb'
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.manager: Starting backfill of daily summaries
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.manager: Daily summaries up to date
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.manager: Daily summary version is 4.0
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Retrieving 1 page(s); starting index= 4
Nov 11 12:16:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 12:15:00 CST (1668190500) to database 'weewx.sdb'
Nov 11 12:16:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 12:15:00 CST (1668190500) to daily summary in 'weewx.sdb'
Nov 11 12:16:17 raspberrypi weewx[4130] INFO weewx.engine: Starting main packet loop.
Nov 11 12:16:17 raspberrypi weewx[4130] DEBUG weewx.restx: CWOP: Connected to server cwop.aprs.net:14580
Nov 11 12:16:17 raspberrypi weewx[4130] INFO weewx.restx: CWOP: Published record 2022-11-11 12:15:00 CST (1668190500)
Nov 11 12:16:21 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Wakeup retry #1 failed: Expected to read 2 chars; got 0 instead
Nov 11 12:16:22 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:16:22 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Requesting 200 LOOP packets.
Nov 11 12:16:22 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT try #1; error: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT try #2; error: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT try #3; error: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT try #4; error: Unable to wake up Vantage console
Nov 11 12:15:16 raspberrypi weewx[4130] ERROR weewx.drivers.vantage: DMPAFT max tries (4) exceeded.
Nov 11 12:15:16 raspberrypi weewx[4130] INFO weewx.engine: Main loop exiting. Shutting engine down.
Nov 11 12:15:16 raspberrypi weewx[4130] DEBUG weewx.restx: Shut down CWOP thread.
Nov 11 12:15:16 raspberrypi weewx[4130] CRITICAL __main__: Caught WeeWxIOError: Max tries exceeded while getting archive data.
Nov 11 12:15:16 raspberrypi weewx[4130] CRITICAL __main__: **** Waiting 60 seconds then retrying...
Nov 11 12:16:16 raspberrypi weewx[4130] INFO __main__: retrying...
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG __main__: Initializing engine
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage)
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Driver version is 3.4.0
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Option loop_request=1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Hardware type is 16
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: ISS ID is 1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Hardware name: Vantage Pro
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdTimeSynch
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdTimeSynch
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdConvert
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: StdConvert target unit is 0x1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdConvert
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdCalibrate
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdCalibrate
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdQC
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdQC
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxservices.StdWXCalculate
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.wxservices: StdWXCalculate will use data binding wx_binding
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.manager: Daily summary version is 4.0
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxservices.StdWXCalculate
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdWXXTypes
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdWXXTypes
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdPressureCooker
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdPressureCooker
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdRainRater
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdRainRater
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdDelta
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdDelta
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdArchive
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Archive will use data binding wx_binding
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Record generation will be attempted in 'hardware'
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Using archive interval of 900 seconds (specified by hardware)
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Use LOOP data in hi/low calculations: 1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdArchive
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdStationRegistry
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: StationRegistry: Registration not requested.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdStationRegistry
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdWunderground
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: Wunderground: Posting not enabled.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdWunderground
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdPWSweather
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: PWSweather: Posting not enabled.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdPWSweather
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdCWOP
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: CWOP: Data for station K0GV will be posted
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdCWOP
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdWOW
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: WOW: Posting not enabled.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdWOW
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.restx.StdAWEKAS
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.restx: AWEKAS: Posting not enabled.
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdPrint
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Loading service weewx.engine.StdReport
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: 'pyephem' detected, extended almanac data is available
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.engine: Finished loading service weewx.engine.StdReport
Nov 11 12:16:16 raspberrypi weewx[4130] INFO __main__: Starting up weewx version 4.9.1
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Clock error is 0.09 seconds (positive is fast)
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb'
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.manager: Starting backfill of daily summaries
Nov 11 12:16:16 raspberrypi weewx[4130] INFO weewx.manager: Daily summaries up to date
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Getting archive packets since 2022-11-11 12:00:00 CST (1668189600)
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.manager: Daily summary version is 4.0
Nov 11 12:16:16 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Retrieving 1 page(s); starting index= 4
Nov 11 12:16:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 12:15:00 CST (1668190500) to database 'weewx.sdb'
Nov 11 12:16:17 raspberrypi weewx[4130] INFO weewx.manager: Added record 2022-11-11 12:15:00 CST (1668190500) to daily summary in 'weewx.sdb'
Nov 11 12:16:17 raspberrypi weewx[4130] INFO weewx.engine: Starting main packet loop.
Nov 11 12:16:17 raspberrypi weewx[4130] DEBUG weewx.restx: CWOP: Connected to server cwop.aprs.net:14580
Nov 11 12:16:17 raspberrypi weewx[4130] INFO weewx.restx: CWOP: Published record 2022-11-11 12:15:00 CST (1668190500)
Nov 11 12:16:21 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Wakeup retry #1 failed: Expected to read 2 chars; got 0 instead
Nov 11 12:16:22 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Nov 11 12:16:22 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Requesting 200 LOOP packets.
Nov 11 12:16:22 raspberrypi weewx[4130] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Any suggestions are welcome.
Regards,
Darryl
Darryl
Nov 11, 2022, 6:45:56 PM11/11/22
to weewx-user
Forgot to post the config file:
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2022 Tom Keffer <tke...@gmail.com>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations. May get overridden below.
log_success = True
# Whether to log unsuccessful operations. May get overridden below.
log_failure = True
# Do not modify this. It is used when installing and updating weewx.
version = 4.9.1
config_path = /etc/weewx/weewx.conf
entry_path = /usr/share/weewx/wee_config
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "K0GV weather Minnetonka, MN"
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 44.922
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -93.513
# Altitude of the station, with the unit it is in. This is used only
# if the hardware cannot supply a value.
altitude = 900, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file, which includes a value for the 'driver' option.
station_type = Vantage
# If you have a website, you may specify an URL. This is required if you
# intend to register your station.
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1
# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 1
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
# Uncomment and change to override logging for uploading services.
# log_success = True
# log_failure = True
[[StationRegistry]]
# To register this weather station with weewx, set this to true,
# then fill out option 'station_url' above.
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to post to AWEKAS, set the option 'enable' to true, then specify a username
# and password. To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to post to CWOP, set the option 'enable' to true,
# then specify the station ID (e.g., CW1234).
enable = true
station = K0GV
# If this is an APRS (radio amateur) station, specify the
# passcode (e.g., 12345). Otherwise, ignore.
passcode = 32644
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to post to PWSweather.com, set the option 'enable' to true, then specify a
# station and password. To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to post to WOW, set the option 'enable' to true, then specify a station and
# password. To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to post to the Weather Underground, set the option 'enable' to true, then
# specify a station (e.g., 'KORHOODR3') and password. To guard against parsing errors, put
# the password in quotes.
enable = false
station = replace_me
password = replace_me
# If you plan on using wunderfixer, set the following
# to your API key:
api_key = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# Uncomment and change to override logging for reports
# log_success = True
# log_failure = True
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = true
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
# Options in the [[Defaults]] section below will apply to all reports.
# What follows are a few of the more popular options you may want to
# uncomment, then change.
[[Defaults]]
# Which language to use for all reports. Not all skins support all languages.
# You can override this for individual reports.
lang = en
# Which unit system to use for all reports. Choices are 'us', 'metric', or 'metricwx'.
# You can override this for individual reports.
unit_system = us
[[[Units]]]
# Option "unit_system" above sets the general unit system, but overriding specific unit
# groups is possible. These are popular choices. Uncomment and set as appropriate.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
# group_altitude = meter # Options are 'foot' or 'meter'
# group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa'
# group_rain = mm # Options are 'inch', 'cm', or 'mm'
# group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# group_temperature = degree_C # Options are 'degree_C', 'degree_F', or 'degree_K'
# The following line is used to keep the above lines indented properly.
# It can be ignored.
unused = unused
# Uncommenting the following section frequently results in more
# attractive formatting of times and dates, but may not work in
# your locale.
[[[[TimeFormats]]]]
# day = %H:%M
# week = %H:%M on %A
# month = %d-%b-%Y %H:%M
# year = %d-%b-%Y %H:%M
# rainyear = %d-%b-%Y %H:%M
# current = %d-%b-%Y %H:%M
# ephem_day = %H:%M
# ephem_year = %d-%b-%Y %H:%M
# The following line is used to keep the above lines indented properly.
# It can be ignored.
unused = unused
[[[Labels]]]
# Users frequently change the labels for these observation types
[[[[Generic]]]]
# inHumidity = Inside Humidity
# inTemp = Inside Temperature
# outHumidity = Outside Humidity
# outTemp = Outside Temperature
# extraTemp1 = Temperature1
# extraTemp2 = Temperature2
# extraTemp3 = Temperature3
# The following line is used to keep the above lines indented properly.
# It can be ignored.
unused = unused
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 900
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# Uncomment and change to override logging for archive operations
# log_success = True
# log_failure = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password (use quotes to guard against parsing errors)
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
# The following section specifies which services should be run and in what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
#
# Copyright (c) 2009-2022 Tom Keffer <tke...@gmail.com>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations. May get overridden below.
log_success = True
# Whether to log unsuccessful operations. May get overridden below.
log_failure = True
# Do not modify this. It is used when installing and updating weewx.
version = 4.9.1
config_path = /etc/weewx/weewx.conf
entry_path = /usr/share/weewx/wee_config
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "K0GV weather Minnetonka, MN"
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 44.922
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -93.513
# Altitude of the station, with the unit it is in. This is used only
# if the hardware cannot supply a value.
altitude = 900, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file, which includes a value for the 'driver' option.
station_type = Vantage
# If you have a website, you may specify an URL. This is required if you
# intend to register your station.
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1
# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 1
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
# Uncomment and change to override logging for uploading services.
# log_success = True
# log_failure = True
[[StationRegistry]]
# To register this weather station with weewx, set this to true,
# then fill out option 'station_url' above.
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to post to AWEKAS, set the option 'enable' to true, then specify a username
# and password. To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to post to CWOP, set the option 'enable' to true,
# then specify the station ID (e.g., CW1234).
enable = true
station = K0GV
# If this is an APRS (radio amateur) station, specify the
# passcode (e.g., 12345). Otherwise, ignore.
passcode = 32644
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to post to PWSweather.com, set the option 'enable' to true, then specify a
# station and password. To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to post to WOW, set the option 'enable' to true, then specify a station and
# password. To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to post to the Weather Underground, set the option 'enable' to true, then
# specify a station (e.g., 'KORHOODR3') and password. To guard against parsing errors, put
# the password in quotes.
enable = false
station = replace_me
password = replace_me
# If you plan on using wunderfixer, set the following
# to your API key:
api_key = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# Uncomment and change to override logging for reports
# log_success = True
# log_failure = True
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = true
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
# Options in the [[Defaults]] section below will apply to all reports.
# What follows are a few of the more popular options you may want to
# uncomment, then change.
[[Defaults]]
# Which language to use for all reports. Not all skins support all languages.
# You can override this for individual reports.
lang = en
# Which unit system to use for all reports. Choices are 'us', 'metric', or 'metricwx'.
# You can override this for individual reports.
unit_system = us
[[[Units]]]
# Option "unit_system" above sets the general unit system, but overriding specific unit
# groups is possible. These are popular choices. Uncomment and set as appropriate.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
# group_altitude = meter # Options are 'foot' or 'meter'
# group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa'
# group_rain = mm # Options are 'inch', 'cm', or 'mm'
# group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# group_temperature = degree_C # Options are 'degree_C', 'degree_F', or 'degree_K'
# The following line is used to keep the above lines indented properly.
# It can be ignored.
unused = unused
# Uncommenting the following section frequently results in more
# attractive formatting of times and dates, but may not work in
# your locale.
[[[[TimeFormats]]]]
# day = %H:%M
# week = %H:%M on %A
# month = %d-%b-%Y %H:%M
# year = %d-%b-%Y %H:%M
# rainyear = %d-%b-%Y %H:%M
# current = %d-%b-%Y %H:%M
# ephem_day = %H:%M
# ephem_year = %d-%b-%Y %H:%M
# The following line is used to keep the above lines indented properly.
# It can be ignored.
unused = unused
[[[Labels]]]
# Users frequently change the labels for these observation types
[[[[Generic]]]]
# inHumidity = Inside Humidity
# inTemp = Inside Temperature
# outHumidity = Outside Humidity
# outTemp = Outside Temperature
# extraTemp1 = Temperature1
# extraTemp2 = Temperature2
# extraTemp3 = Temperature3
# The following line is used to keep the above lines indented properly.
# It can be ignored.
unused = unused
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 900
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# Uncomment and change to override logging for archive operations
# log_success = True
# log_failure = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password (use quotes to guard against parsing errors)
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
# The following section specifies which services should be run and in what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
Darryl
Nov 11, 2022, 8:29:10 PM11/11/22
to weewx-user
Looking at some of the conversations, my issues are identical to what is being discussed in the "4.9.1 Issue" conversation. Seems it is an issue that cropped up with the latest release and is being worked on.
My system is an old Vantage Pro 1 (not the 2).
On Friday, November 11, 2022 at 12:25:13 PM UTC-6 Darryl wrote:
Darryl
Nov 11, 2022, 8:46:43 PM11/11/22
to weewx-user
Downgraded to 4.8.0 and the system works again.
Reply all
Reply to author
Forward
0 new messages