Belchertown-New data not updating

Gregalfl

unread,

May 6, 2026, 7:35:14 PM (5 days ago) May 6

to weewx-user

I have loaded this skin on to my Raspberry Pi I am running Weewx on and have it initialized for my site. I find that it is not updating my weather data unless I go into terminal mode on the Pi and do a sudo weectl report run command, then the data has updated to the latest information that was pulled by Weewx. I am running Weewx version 5.3.1 and Belchertown-New version 1.6. I will also note that I am running the Weewx Tags Skin as well that ftp's those pages to a different folder on my web server.

the Belchertown site is located at https://www.allshouse.net/weewx/belchertown/
the Tags skin goes to https://www.allshouse.net/weewx/public_html/saratoga/wxindex.php

Does anyone have any idea why my data is not logging every 5 minutes as it should?

Thank you for your help

John Smith

unread,

May 6, 2026, 10:48:39 PM (5 days ago) May 6

to weewx...@googlegroups.com

Set debug=1 in weewx.conf and restart then wait a full reporting period then post the full log minus any passwords

--
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/weewx-user/d4ebff87-ca3e-4d38-a3a6-a9294e4d6b50n%40googlegroups.com.

Gregalfl

unread,

May 8, 2026, 8:36:44 AM (3 days ago) May 8

to weewx-user

John

Hopefully this is what you are looking for. Let me know if you need anything else or if you have any insight into what I have set up incorrectly

Again Thank you

station = XXXXXX
# If this is an APRS (radio amateur) station, specify the
# passcode (e.g., 12345). Otherwise, ignore.
passcode = XXXXXX

[[PWSweather]]
# This section is for configuring posts to PWSweather.com.

# If you wish to post to PWSweather.com, set the option 'enable' to
# true, then specify a station and password.
# Use quotes around the password to guard against parsing errors.
enable = true
station = XXXXXX
password = XXXXXX

[[WOW]]
# This section is for configuring posts to WOW (wow.metoffice.gov.uk).

# If you wish to post to WOW, set the option 'enable' to true, then
# specify a station and password.
# Use quotes around the password to guard against parsing errors.
enable = false
station = XXXXXX
password = XXXXXX

[[WOW-BE]]
# This section is for configuring WeeWX to upload to WOW-BE (wow.meteo.be)

# If you wish to post to WOW-BE, set the option 'enable' to true, then
# specify a station and password.
# Use quotes around the password to guard against parsing errors.
enable = false
station = XXXXXX
password = XXXXXX

[[Wunderground]]
# This section is for configuring posts to the Weather Underground.

# If you wish to post to the Weather Underground, set the option
# 'enable' to true, then specify a station (e.g., 'KORHOODR3'). Use
# the station key (find it at
# https://www.wunderground.com/member/devices) for the password.
enable = true
station = XXXXXX
password = XXXXXX

# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = True

##############################################################################

# This section specifies what reports, using which skins, to generate.

[StdReport]

# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins

# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx

# Uncomment and change to override logging for reports.
log_success = False
log_failure = True

# The database binding indicates which data should be used in reports.
data_binding = wx_binding

# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.

[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = false

[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone

[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile

[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false

[[WEEWXtagsReport]]
HTML_ROOT = /var/www/html/weewx/public_html/saratoga
skin = WEEWXtags
enable = True
[[[Units]]]
[[[[StringFormats]]]]
NONE = --
[[[[TimeFormats]]]]
date_f = %d/%m/%Y
date_time_f = %d/%m/%Y %H:%M
[[ClientrawReport]]
HTML_ROOT = /var/www/html/weewx/public_html/saratoga
skin = Clientraw
enable = True
[[[Units]]]
[[[[StringFormats]]]]
degree_C = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
km = %.1f
knot = %.1f
mm = %.1f
percent = %.0f
uv_index = %.1f
watt_per_meter_squared = %.0f
NONE = --

[[Belchertown]]
skin = Belchertown
HTML_ROOT = /var/www/html/weewx/belchertown
enable = true

[[[Extras]]]

# For help refer to the docs at https://github.com/uajqq/weewx-belchertown-new
# and consult skin.conf for the configurable elements and their hierarchy

#---General Site Defaults---
belchertown_debug = 1
belchertown_locale = auto
theme = light
theme_toggle_enabled = 1
site_title = Allshouse Conservatory Weather
# logo_image = ""
# logo_image_dark = ""
# radar_html = ""
# radar_html_dark = ""
# radar_width = 650
# radar_height = 360
# radar_marker = 0
#---Forecast unit of measures---
radar_rain = default # default, mm, in
radar_temp = default # default, C, F
radar_wind = default # default, kt, m/s, km/h, mph, bft
aeris_map = 1
almanac_extras = 1

#---Station Observations---
station_observations = XXXXXX

#---Manifest Settings for Mobile Phones---
# manifest_name = "My Weather Website"
# manifest_short_name = "MWW"

#---Highcharts settings---
highcharts_enabled = 1
graph_page_show_all_button = 1
graph_page_default_graphgroup = day
highcharts_homepage_graphgroup = homepage
highcharts_decimal = auto
highcharts_thousands = auto

#---MQTT Websockets defaults---
# mqtt_websockets_enabled = 0
# mqtt_websockets_host = ""
# mqtt_websockets_port = 1883
# mqtt_websockets_ssl = 0
# mqtt_websockets_topic = ""
# mqtt_websockets_username = ""
# mqtt_websockets_password = ""
# disconnect_live_website_visitor = 1800000
# show_last_updated_alert = 0
# last_updated_alert_threshold = 1800
# webpage_autorefresh = 1

#---Image Reload Section---
# reload_hook_images = 0
# reload_images_radar = 300
# reload_images_hook_asi = -1
# reload_images_hook_af = -1
# reload_images_hook_as = -1
# reload_images_hook_ac = -1

#---Forecast defaults---
forecast_enabled = 1
forecast_provider = aeris
forecast_api_id = XXXXXX
forecast_api_secret = XXXXXX
forecast_units = us
forecast_interval_hours = 24

forecast_lang = en
forecast_stale = 3540 # 59 minutes
current_conditions_stale = 3540 # 59 minutes
forecast_aeris_use_metar = 1
forecast_alert_enabled = 1
forecast_alert_limit = 1
forecast_show_daily_forecast_link = 1
forecast_daily_forecast_link = ""
forecast_show_humidity_dewpoint = 1
forecast_place = ""
current_conditions = obs
current_conditions_timestamp_enabled = 1

#---Air Quality Index (AQI) defaults---
aqi_enabled = 1
aqi_location_enabled = 1

#---Show Beaufort wind scale category under wind table---
beaufort_category = 1
beaufort_category_gusts = 1

#---Earthquake defaults---
earthquake_enabled = 1
earthquake_maxradiuskm = 1000
earthquake_stale = 10740
earthquake_server = USGS
geonet_mmi = 4

#---Social Share Button Defaults. Define the text below under Labels---
# facebook_enabled = 0
# twitter_enabled = 0
# social_share_html = ""

#---Google Analytics---
# googleAnalyticsId = ""

# This is the display of the Pi Kiosk which is in the /pi folder
# pi_kiosk_bold = "false"
# pi_theme = "auto"

# This is the display of the kiosk page which is kiosk.html
# radar_html_kiosk = ""
# radar_width_kiosk = 490
# radar_height_kiosk = 362
# mqtt_websockets_host_kiosk = ""
# mqtt_websockets_port_kiosk = ""
# mqtt_websockets_ssl_kiosk = ""
# forecast_interval_hours_kiosk = 24
# aqi_enabled_kiosk = 0

# Display a Back To Top Button
# back_to_top_button_enabled = 0
# back_to_top_button_position = 0
# back_to_top_button_opacity = 0.8

#-------------------------------------------------------------
#---
#--- python's ConfigObj has a limitation in how it processes
#--- comments, so we need to define an 'unused' variable below
#--- to ensure that this whole stanza makes it into weewx.conf
#---
#--- please ignore the following 'unused' variable
#---
#-------------------------------------------------------------
# work_around_ConfigObj_limitations = true

[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then fill out the
# next four lines.
# Use quotes around the password to guard against parsing errors.
enable = true
user = XXXXXX
password = XXXXXX
server = XXXXXX
path = /allshouse.net/weewx

# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = false

# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx

# Most FTP servers use port 21.
port = 21

# Set to 1 to use passive mode, zero for active mode
passive = 1

[[RSYNC]]
# rsync'ing to a webserver is treated as just another report.
skin = Rsync

# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = XXXXXX
user = XXXXXX
path = replace_me

# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx

# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0

# Options in the [[Defaults]] section below will apply to all reports.
# What follows are a few of the more popular options you may want to
# uncomment, then change.
[[Defaults]]

# Which language to use for all reports. Not all skins support all
# languages. You can override this for individual reports.
lang = en_US

# Which unit system to use for all reports. Choices are 'us', 'metric',
# or 'metricwx'. You can override this for individual reports.
unit_system = us

[[[Units]]]

# Option "unit_system" above sets the general unit system, but
# overriding specific unit groups is possible. These are popular
# choices. Uncomment and set as appropriate. The unit is always
# in the singular, e.g., 'mile_per_hour', NOT 'miles_per_hour'
[[[[Groups]]]]
# group_altitude = meter # Options are 'foot' or 'meter'
# group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa'
# group_rain = mm # Options are 'inch', 'cm', or 'mm'
# group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# group_temperature = degree_C # Options are 'degree_C', 'degree_F', or 'degree_K'
# The following line is used to keep the above lines indented
# properly. It can be ignored.
unused = unused

# Uncommenting the following section frequently results in more
# attractive formatting of times and dates, but may not work in
# your locale.
[[[[TimeFormats]]]]
# day = %H:%M
# week = %H:%M on %A
# month = %d-%b-%Y %H:%M
# year = %d-%b-%Y %H:%M
# rainyear = %d-%b-%Y %H:%M
# current = %d-%b-%Y %H:%M
# ephem_day = %H:%M
# ephem_year = %d-%b-%Y %H:%M
# The following line is used to keep the above lines indented
# properly. It can be ignored.
unused = unused

[[[Labels]]]
# Users frequently change the labels for these observation types.
[[[[Generic]]]]
# inHumidity = Inside Humidity
# inTemp = Inside Temperature
# outHumidity = Outside Humidity
# outTemp = Outside Temperature
extraTemp1 = Refrigerator Temp
extraHumid1 = Refrigerator Hum
extraTemp2 = Video Server Temp
extraHumid2 = Video Server Hum
extraTemp3 = Garage Attic Temp
extraHumid3 = Garage Attic Hum
extraTemp4 = Lanai Temp
extraHumid4 = Lanai Hum
extraTemp5 = Main Attic Temp
extraHumid5 = Main Attic Hum
extraTemp6 = Bird Cage Temp
extraHumid6 = Bird Cage Hum
extraTemp7 = Freezer Temp
extraHumid7 = Freezer Hum
extraTemp8 = Garage Temp
extraHumid8 = Garage Hum
soilMoist1 = Mint Planter Moist
soilMoist2 = Chive Planter Moist
soilMoist3 = Herb Planter Moist
soilMoist4 = Planter Moist
soilMoist5 = Pepper Planter Moist
soilMoist6 = Lime Tree Moist
soilMoist7 = Lavender Planter Moist
soilMoist8 = Lemon Tree Moist
pm2_5 = Outdoor AQI
extraTemp9 = Soil Temp
extraTemp10 = HVAC Temp
pm2_52 = Indoor AQI
soilTemp1 = Soil Temp
soilTemp2 = HVAC Temp
pm2_52_24h_avg = Indoor 24 HR AQI AVE
pm2_51_24h_avg = Outdoor 24HR AQI AVE
signal1 = Signal Quality
# The following line is used to keep the above lines indented
# properly. It can be ignored.
unused = unused

##############################################################################

# This service converts the unit system coming from the hardware to a unit
# system in the database.

[StdConvert]

# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.

# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

# This section can adjust data using calibration expressions.

[StdCalibrate]

[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
soilTemp1 = extraTemp9
soilTemp2 = extraTemp10
rxCheckPercent = rxCheckPercent * 20
radiation = radiation / 126.7
foo = foo + 0.2
##############################################################################

# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.

[StdQC]

[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch

##############################################################################

# This section controls the origin of derived values.

[StdWXCalculate]

[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx

pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
wet_bulb = prefer_hardware
abs_humidity = prefer_hardware, archive
maxSolarRaad = software

##############################################################################

# For hardware that supports it, this section controls how often the
# onboard clock gets updated.

[StdTimeSynch]

# How often to check the weather station clock for drift (in seconds)
clock_check = 14400

# How much it can drift before we will correct it (in seconds)
max_drift = 5

##############################################################################

# This section is for configuring the archive service.

[StdArchive]

# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300

# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software

# Whether to include LOOP data in hi/low statistics.
loop_hilo = True

# Uncomment and change to override logging for archive operations.
# log_success = True
# log_failure = True

# The data binding used to save archive records.
data_binding = wx_binding

##############################################################################

# This section binds a data store to a database.

[DataBindings]

[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database.
table_name = archive
# The manager handles aggregation of data for historical summaries.
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = weewx.schemas.wview_extended.schema
[[ws_binding]]
database = ws_sqlite
table_name = archive
manager = weewx.manager.DaySummaryManager
schema = user.wsschema.ws_schema

##############################################################################

# This section defines various databases.

[Databases]

# A SQLite database is simply a single file.
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite

# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
[[ws_sqlite]]
database_type = SQLite
database_name = weewxwd.sdb
[[ws_mysql]]
database_type = MySQL
database_name = weewxwd

##############################################################################

# This section defines defaults for the different types of databases.

[DatabaseTypes]

# Defaults for SQLite databases.
[[SQLite]]
driver = weedb.sqlite
# Directory in which database files are located, relative to WEEWX_ROOT
SQLITE_ROOT = /var/lib/weewx

# Defaults for MySQL databases.
[[MySQL]]
driver = weedb.mysql
# The host where the database is located.
host = localhost
# The user name for logging in to the host.
user = XXXXXX
# Use quotes around the password to guard against parsing errors.
password = XXXXXX

##############################################################################

# This section configures the internal weewx engine.

[Engine]

# This section specifies which services should be run and in what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.ws.WsWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta, user.wsxtypes.StdWSXTypes
archive_services = weewx.engine.StdArchive, user.ws.WsArchive
restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdWOWBE, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport, user.rtcr.RealtimeClientraw

[Accumulator]

# Start Ecowitt Gateway driver extractors
[[daymaxwind]]
extractor = last
[[lightning_distance]]
extractor = last
[[lightning_strike_count]]
extractor = sum
[[lightningcount]]
extractor = last
[[lightning_last_det_time]]
extractor = last
[[stormRain]]
extractor = last
[[hourRain]]
extractor = last
[[dayRain]]
extractor = last
[[weekRain]]
extractor = last
[[monthRain]]
extractor = last
[[yearRain]]
extractor = last
[[totalRain]]
extractor = last
[[p_rain]]
extractor = sum
[[p_stormRain]]
extractor = last
[[p_dayRain]]
extractor = last
[[p_weekRain]]
extractor = last
[[p_monthRain]]
extractor = last
[[p_yearRain]]
extractor = last
[[t_rain]]
extractor = sum
[[t_stormRain]]
extractor = last
[[t_dayRain]]
extractor = last
[[t_weekRain]]
extractor = last
[[_monthRain]]
extractor = last
[[t_yearRain]]
extractor = last
[[pm2_51_24h_avg]]
extractor = last
[[pm2_52_24h_avg]]
extractor = last
[[pm2_53_24h_avg]]
extractor = last
[[pm2_54_24h_avg]]
extractor = last
[[pm2_55_24h_avg]]
extractor = last
[[pm10_24h_avg]]
extractor = last
[[co2_24h_avg]]
extractor = last
[[heap_free]]
extractor = last
[[wh40_batt]]
extractor = last
[[wh26_batt]]
extractor = last
[[wh25_batt]]
extractor = last
[[wh24_batt]]
extractor = last
[[wh65_batt]]
extractor = last
[[wh31_ch1_batt]]
extractor = last
[[wh31_ch2_batt]]
extractor = last
[[wh31_ch3_batt]]
extractor = last
[[wh31_ch4_batt]]
extractor = last
[[wh31_ch5_batt]]
extractor = last
[[wh31_ch6_batt]]
extractor = last
[[wh31_ch7_batt]]
extractor = last
[[wh31_ch8_batt]]
extractor = last
[[wn34_ch1_batt]]
extractor = last
[[wn34_ch2_batt]]
extractor = last
[[wn34_ch3_batt]]
extractor = last
[[wn34_ch4_batt]]
extractor = last
[[wn34_ch5_batt]]
extractor = last
[[wn34_ch6_batt]]
extractor = last
[[wn34_ch7_batt]]
extractor = last
[[wn34_ch8_batt]]
extractor = last
[[wn35_ch1_batt]]
extractor = last
[[wn35_ch2_batt]]
extractor = last
[[wn35_ch3_batt]]
extractor = last
[[wn35_ch4_batt]]
extractor = last
[[wn35_ch5_batt]]
extractor = last
[[wn35_ch6_batt]]
extractor = last
[[wn35_ch7_batt]]
extractor = last
[[wn35_ch8_batt]]
extractor = last
[[wh41_ch1_batt]]
extractor = last
[[wh41_ch2_batt]]
extractor = last
[[wh41_ch3_batt]]
extractor = last
[[wh41_ch4_batt]]
extractor = last
[[wh45_batt]]
extractor = last
[[wh46_batt]]
extractor = last
[[wh51_ch1_batt]]
extractor = last
[[wh51_ch2_batt]]
extractor = last
[[wh51_ch3_batt]]
extractor = last
[[wh51_ch4_batt]]
extractor = last
[[wh51_ch5_batt]]
extractor = last
[[wh51_ch6_batt]]
extractor = last
[[wh51_ch7_batt]]
extractor = last
[[wh51_ch8_batt]]
extractor = last
[[wh51_ch9_batt]]
extractor = last
[[wh51_ch10_batt]]
extractor = last
[[wh51_ch11_batt]]
extractor = last
[[wh51_ch12_batt]]
extractor = last
[[wh51_ch13_batt]]
extractor = last
[[wh51_ch14_batt]]
extractor = last
[[wh51_ch15_batt]]
extractor = last
[[wh51_ch16_batt]]
extractor = last
[[wh55_ch1_batt]]
extractor = last
[[wh55_ch2_batt]]
extractor = last
[[wh55_ch3_batt]]
extractor = last
[[wh55_ch4_batt]]
extractor = last
[[wh57_batt]]
extractor = last
[[wh68_batt]]
extractor = last
[[ws80_batt]]
extractor = last
[[ws85_batt]]
extractor = last
[[ws90_batt]]
extractor = last
[[wh40_sig]]
extractor = last
[[wh26_sig]]
extractor = last
[[wh25_sig]]
extractor = last
[[wh24_sig]]
extractor = last
[[wh65_sig]]
extractor = last
[[wh31_ch1_sig]]
extractor = last
[[wh31_ch2_sig]]
extractor = last
[[wh31_ch3_sig]]
extractor = last
[[wh31_ch4_sig]]
extractor = last
[[wh31_ch5_sig]]
extractor = last
[[wh31_ch6_sig]]
extractor = last
[[wh31_ch7_sig]]
extractor = last
[[wh31_ch8_sig]]
extractor = last
[[wn34_ch1_sig]]
extractor = last
[[wn34_ch2_sig]]
extractor = last
[[wn34_ch3_sig]]
extractor = last
[[wn34_ch4_sig]]
extractor = last
[[wn34_ch5_sig]]
extractor = last
[[wn34_ch6_sig]]
extractor = last
[[wn34_ch7_sig]]
extractor = last
[[wn34_ch8_sig]]
extractor = last
[[wn35_ch1_sig]]
extractor = last
[[wn35_ch2_sig]]
extractor = last
[[wn35_ch3_sig]]
extractor = last
[[wn35_ch4_sig]]
extractor = last
[[wn35_ch5_sig]]
extractor = last
[[wn35_ch6_sig]]
extractor = last
[[wn35_ch7_sig]]
extractor = last
[[wn35_ch8_sig]]
extractor = last
[[wh41_ch1_sig]]
extractor = last
[[wh41_ch2_sig]]
extractor = last
[[wh41_ch3_sig]]
extractor = last
[[wh41_ch4_sig]]
extractor = last
[[wh45_sig]]
extractor = last
[[wh46_sig]]
extractor = last
[[wh51_ch1_sig]]
extractor = last
[[wh51_ch2_sig]]
extractor = last
[[wh51_ch3_sig]]
extractor = last
[[wh51_ch4_sig]]
extractor = last
[[wh51_ch5_sig]]
extractor = last
[[wh51_ch6_sig]]
extractor = last
[[wh51_ch7_sig]]
extractor = last
[[wh51_ch8_sig]]
extractor = last
[[wh51_ch9_sig]]
extractor = last
[[wh51_ch10_sig]]
extractor = last
[[wh51_ch11_sig]]
extractor = last
[[wh51_ch12_sig]]
extractor = last
[[wh51_ch13_sig]]
extractor = last
[[wh51_ch14_sig]]
extractor = last
[[wh51_ch15_sig]]
extractor = last
[[wh51_ch16_sig]]
extractor = last
[[wh55_ch1_sig]]
extractor = last
[[wh55_ch2_sig]]
extractor = last
[[wh55_ch3_sig]]
extractor = last
[[wh55_ch4_sig]]
extractor = last
[[wh57_sig]]
extractor = last
[[wh68_sig]]
extractor = last
[[ws80_sig]]
extractor = last
[[ws85_sig]]
extractor = last
[[ws90_sig]]
extractor = last

# Start WeeWX-Saratoga extractors
[[forecastRule]]
extractor = last
[[forecastText]]
accumulator = firstlast
extractor = last

[WeewxSaratoga]
# WeewxSaratoga database binding
data_binding = ws_binding

# radiation (solar insolation) level above which the sun is considered
# shining
sunshine_threshold = 120

[[RealtimeClientraw]]

# If using an external website, configure remote_server_url to point to
# the post_clientraw.php script on your website like:
remote_server_url = http://www.allshouse.net/weewx/public_html/saratoga/post_clientraw.php
#
# To disable or use the webserver on this system, leave the entry
# commented out or blank.
# remote_server_url = http://your.website.com/post_clientraw.php

# min_interval sets the minimum clientraw.txt generation interval.
# 10 seconds is recommended for all Saratoga template users. Default
# is 0 seconds.
min_interval = 10

# Python date-time format strings. Format string codes as per
# https://docs.python.org/3/library/datetime.html#strftime-and-strptime-format-codes

# Date format. Recommended entries are:
# date_format = %-m/%-d/%Y # recommended for USA users
# date_format = %-d/%-m/%Y # recommended for non-USA users
date_format = %-d/%-m/%Y

# Long format times (HMS). Recommended entries are:
# long_time_format = %-I:%M:%S_%p # recommended for USA users
# long_time_format = %H:%M:%S # recommended for non-USA users
long_time_format = %H:%M:%S

# Short format times (HM). Recommended entries are:
# short_time_format = %-I:%M_%p # recommended for USA users
# short_time_format = %H:%M # recommended for non-USA users
short_time_format = %H:%M
[FileParse]
poll_interval = 10
path = /var/tmp/datafile
driver = user.fileparse

John Smith

unread,

May 8, 2026, 10:15:11 AM (3 days ago) May 8

to weewx...@googlegroups.com

I was actually asking for weeWX debug logging, not the config itself, although you need to add "debug=1" at the top of that file and restarting weeWX, no quotes.

Then after weeWX has been running for at least an archive period, usually 5 minutes, you can retrieve the log using journalctl

journalctl --since "5 minutes ago" -u weewx.service > log-dump.txt

Then attach log-dump.txt in a reply

To view this discussion visit https://groups.google.com/d/msgid/weewx-user/16fe9963-ff20-4e9c-be75-3b09a84876a7n%40googlegroups.com.

Reply all

Reply to author

Forward