Unmapped bresser7in1

[magnus hult]

hello

I have set up rtl dongle 433 and weewx. 

I have a proper sdr.py and a weewx.conf. with a sdr driver section and mapping

i still does not get one single map.

testruns shows both 

out and parsed .

syslog only shows unmapped.

what can i do more ?

[paul...@gmail.com]

Hi Magnus

You don't say which version of sdr.py you are using but you need 0.93 to run the Bresser 7in1.

Have a look at this thread https://github.com/matthewwall/weewx-sdr/issues/179

Paul

[magnus hult]

hello. I can confirm that it is sdr.py 0.93 . weewx version is 4.10,2

[magnus hult]

ov 30 19:20:07 solen-OptiPlex-9020M weewx[17912] INFO user.sdr: unmapped: {'dateTime': 1701368404, 'usUnits': 17, 'temperature.17041.Bresser7in1Packet': -2.3, 'humidity.17041.Bresser7in1Packet': 92.0, 'wind_gust.17041.Bresser7in1Packet': 1.0, 'wind_speed.17041.Bresser7in1Packet': 1.0, 'wind_dir.17041.Bresser7in1Packet': 332.0, 'rain_total.17041.Bresser7in1Packet': 96.0, 'lux.17041.Bresser7in1Packet': None, 'uv.17041.Bresser7in1Packet': 0.0, 'battery.17041.Bresser7in1Packet': 0}

this is output from syslog( Ubuntu like debian installation of weewx. )

I have tried to change one mapping of  in weewx.conf in various ways 

outTemp = temperature.*.* 

or 

outTemp =  temperature.17041.Bresser7in1Packet

or 

outTemp = temperature_C.17041.Bresser7in1Packet

the results are the same : unmapped