Samsung front load washer drum removal

37 views
Skip to first unread message

Gary Fee

unread,
May 3, 2025, 4:32:07 PMMay 3
to washer...@googlegroups.com
Do you have any suggestions when the drum doesn't come out of the tub as easily as it did in the video? 

Thanks, 

Gary

Mark T

unread,
Jun 16, 2025, 4:01:56 PMJun 16
to Washer Repair
Hi Gary, You can take piece of wood and bump easily with hummer to push drum shaft out of bearings.  

Tuey Family

unread,
Jun 16, 2025, 6:25:37 PMJun 16
to washer-rep...@googlegroups.com, Washer Repair
Mine was stuck on pretty good and I used a method I saw on another video, put the rear bolt back onto the shaft (leave the pully/wheel off), lift the whole tub assemby off the floor, the bottom rear shaft with bolt screwed in should be  about 1 foot from the floor, now let go and let it fall to the hard floor. You may need to so this a couple of times to move the inner drum from the assembly. You should also squirt the shaft with penetrating oil to aid in the loosening of the inner drum from outer assembly. You place the bolt back onto the shaft so the shaft doesn't get damaged when you drop it onto the hard floor.  You could also place a 2x4 on the floor to drop the drum onto to prevent any damage to the shaft or bolt.

--
--
For more info: http://www.yellowvanhandyman.com/washerrepair.aspx
 
You received this message because you are subscribed to the Google
Groups "Washer Repair" group.
To post to this group, send email to washer...@googlegroups.com
To unsubscribe from this group, send email to
washer-repai...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/washer-repair?hl=en
---
You received this message because you are subscribed to the Google Groups "Washer Repair" group.
To unsubscribe from this group and stop receiving emails from it, send an email to washer-repai...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/washer-repair/2d6af665-1929-43df-a22b-7e9c90c529a0n%40googlegroups.com.
Reply all
Reply to author
Forward
0 new messages