Commit: runtime(doc): Whitespace updates

[Christian Brabandt]

runtime(doc): Whitespace updates

Commit: https://github.com/vim/vim/commit/c58f91c035db09358c282f2a908e2aea4287785e
Author: Doug Kearns <dougk...@gmail.com>
Date: Sun Oct 12 15:31:11 2025 +0000

runtime(doc): Whitespace updates

Use double sentence spacing and wrap lines at 'textwidth'. Code
examples and tables were not wrapped unless this had already been done
locally.

closes: #18453

Signed-off-by: Doug Kearns <dougk...@gmail.com>
Signed-off-by: Christian Brabandt <c...@256bit.org>

diff --git a/runtime/doc/autocmd.txt b/runtime/doc/autocmd.txt
index 24dbca49c..134d91477 100644
--- a/runtime/doc/autocmd.txt
+++ b/runtime/doc/autocmd.txt
@@ -1,4 +1,4 @@
-*autocmd.txt* For Vim version 9.1. Last change: 2025 Sep 14
+*autocmd.txt* For Vim version 9.1. Last change: 2025 Oct 12


VIM REFERENCE MANUAL by Bram Moolenaar
@@ -236,7 +236,7 @@ autocmds.

*:autocmd-verbose*
When 'verbose' is non-zero, listing an autocommand will also display where it
-was last defined. Example: >
+was last defined. Example: >

:verbose autocmd BufEnter
FileExplorer BufEnter
@@ -344,7 +344,8 @@ Name triggered by ~
|GUIEnter| after starting the GUI successfully
|GUIFailed| after starting the GUI failed
|TermResponse| after the terminal response to |t_RV| is received
-|TermResponseAll| after the terminal response to |t_RV| and others is received
+|TermResponseAll| after the terminal response to |t_RV| and others is
+ received

|QuitPre| when using `:quit`, before deciding whether to exit
|ExitPre| when using a command that may make Vim exit
@@ -381,7 +382,8 @@ Name triggered by ~
|FocusGained| Vim got input focus
|FocusLost| Vim lost input focus
|CursorHold| the user doesn't press a key for a while
-|CursorHoldI| the user doesn't press a key for a while in Insert mode
+|CursorHoldI| the user doesn't press a key for a while in Insert
+ mode
|CursorMoved| the cursor was moved in Normal mode
|CursorMovedC| the cursor was moved in the |Command-line|
|CursorMovedI| the cursor was moved in Insert mode
@@ -566,7 +568,8 @@ BufWinEnter After a buffer is displayed in a window. This
since it reloads that buffer.
Does not happen for a terminal window, because
it starts in Terminal-Job mode and Normal mode
- commands won't work. Use |TerminalOpen| instead.
+ commands won't work. Use |TerminalOpen|
+ instead.
*BufWinLeave*
BufWinLeave Before a buffer is removed from a window.
Not when it's still visible in another window.
@@ -679,7 +682,7 @@ ColorScheme After loading a color scheme. |:colorscheme|
Not triggered if the color scheme is not
found.
The pattern is matched against the
- colorscheme name. <afile> can be used for the
+ colorscheme name. <afile> can be used for the
name of the actual file where this option was
set, and <amatch> for the new colorscheme
name.
@@ -748,7 +751,7 @@ CursorHold When the user doesn't press a key for the time
triggered. |q|
*<CursorHold>*
Internally the autocommand is triggered by the
- <CursorHold> key. In an expression mapping
+ <CursorHold> key. In an expression mapping
|getchar()| may see this character.

Note: Interactive commands cannot be used for
@@ -1014,7 +1017,7 @@ InsertLeave Just after leaving Insert mode. Also when
using CTRL-O |i_CTRL-O|. But not for |i_CTRL-C|.
*KeyInputPre*
KeyInputPre Just before a key is processed after mappings
- have been applied. The pattern is matched
+ have been applied. The pattern is matched
against a string that indicates the current
mode, which is the same as what is returned by
`mode(1)`.
@@ -1046,7 +1049,7 @@ MenuPopup Just before showing the popup menu (under the
c Command line
tl Terminal
*ModeChanged*
-ModeChanged After changing the mode. The pattern is
+ModeChanged After changing the mode. The pattern is
matched against `'old_mode:new_mode'`, for
example match against `*:c*` to simulate
|CmdlineEnter|.
@@ -1082,7 +1085,7 @@ OptionSet After setting an option. The pattern is

|v:option_oldlocal| is only set when |:set|
or |:setlocal| or a |modeline| was used to set
- the option. Similarly |v:option_oldglobal| is
+ the option. Similarly |v:option_oldglobal| is
only set when |:set| or |:setglobal| was used.

This does not set |<abuf>|, you could use
@@ -1090,10 +1093,10 @@ OptionSet After setting an option. The pattern is

Note that when setting a |global-local| string
option with |:set|, then |v:option_old| is the
- old global value. However, for all other kinds
- of options (local string options, global-local
- number options, ...) it is the old local
- value.
+ old global value. However, for all other
+ kinds of options (local string options,
+ global-local number options, ...) it is the
+ old local value.

OptionSet is not triggered on startup and for
the 'key' option for obvious reasons.
@@ -1105,7 +1108,7 @@ OptionSet After setting an option. The pattern is

Note: It's a bad idea to reset an option
during this autocommand, this may break a
- plugin. You can always use `:noa` to prevent
+ plugin. You can always use `:noa` to prevent
triggering this autocommand.

When using |:set| in the autocommand the event
@@ -1130,7 +1133,7 @@ QuickFixCmdPre Before a quickfix command is run (|:make|,
*QuickFixCmdPost*
QuickFixCmdPost Like QuickFixCmdPre, but after a quickfix
command is run, before jumping to the first
- location. For |:cfile| and |:lfile| commands
+ location. For |:cfile| and |:lfile| commands
it is run after the error file is read and
before moving to the first error.
See |QuickFixCmdPost-example|.
@@ -1174,7 +1177,7 @@ SafeState When nothing is pending, going to wait for the
screen was scrolled for messages.
*SafeStateAgain*
SafeStateAgain Like SafeState but after processing any
- messages and invoking callbacks. This may be
+ messages and invoking callbacks. This may be
triggered often, don't do something that takes
time.

@@ -1278,12 +1281,12 @@ TermChanged After the value of 'term' has changed. Useful
settings. Executed for all loaded buffers.
*TerminalOpen*
TerminalOpen Just after a terminal buffer was created, with
- `:terminal` or |term_start()|. This event is
+ `:terminal` or |term_start()|. This event is
triggered even if the buffer is created
without a window, with the ++hidden option.
*TerminalWinOpen*
TerminalWinOpen Just after a terminal buffer was created, with
- `:terminal` or |term_start()|. This event is
+ `:terminal` or |term_start()|. This event is
triggered only if the buffer is created
with a window. Can be used to set window
local options for the terminal window.
@@ -1480,7 +1483,7 @@ WinLeave Before leaving a window. If the window to be
Not used for ":qa" or ":q" when exiting Vim.

*WinNewPre*
-WinNewPre Before creating a new window. Triggered
+WinNewPre Before creating a new window. Triggered
before commands that modify window layout by
creating a split.
Not done when creating tab pages and for the
@@ -1789,8 +1792,8 @@ option will not cause any commands to be executed.
After applying the autocommands the modelines are
processed, so that their settings overrule the
settings from autocommands, like what happens when
- editing a file. This is skipped when the <nomodeline>
- argument is present. You probably want to use
+ editing a file. This is skipped when the <nomodeline>
+ argument is present. You probably want to use
<nomodeline> for events that are not used when loading
a buffer, such as |User|.
Processing modelines is also skipped when no
@@ -1802,7 +1805,7 @@ option will not cause any commands to be executed.
loaded buffer. The current buffer is done last.

Note that [fname] is used to select the autocommands,
- not the buffers to which they are applied. Example: >
+ not the buffers to which they are applied. Example: >
augroup mine
autocmd!
autocmd FileType * echo expand('<amatch>')
diff --git a/runtime/doc/builtin.txt b/runtime/doc/builtin.txt
index 46450685a..f36688832 100644
--- a/runtime/doc/builtin.txt
+++ b/runtime/doc/builtin.txt
@@ -1,4 +1,4 @@
-*builtin.txt* For Vim version 9.1. Last change: 2025 Oct 01
+*builtin.txt* For Vim version 9.1. Last change: 2025 Oct 12


VIM REFERENCE MANUAL by Bram Moolenaar
@@ -889,7 +889,7 @@ append({lnum}, {text}) *append()*
appendbufline({buf}, {lnum}, {text}) *appendbufline()*
Like |append()| but append the text in buffer {buf}.

- This function works only for loaded buffers. First call
+ This function works only for loaded buffers. First call
|bufload()| if needed.

For the use of {buf}, see |bufname()|.
@@ -903,7 +903,7 @@ appendbufline({buf}, {lnum}, {text}) *appendbufline()*
In |Vim9| script an error is given for an invalid {lnum}.

If {buf} is not a valid buffer or {lnum} is not valid, an
- error message is given. Example: >
+ error message is given. Example: >
:let failed = appendbufline(13, 0, "# THE START")
< However, when {text} is an empty list then no error is given
for an invalid {lnum}, since {lnum} isn't actually used.
@@ -1036,19 +1036,19 @@ autocmd_add({acmds}) *autocmd_add()*
If this item is specified, then the "pattern"
item is ignored.
cmd Ex command to execute for this autocmd event
- event autocmd event name. Refer to |autocmd-events|.
+ event autocmd event name. Refer to |autocmd-events|.
This can be either a String with a single
event name or a List of event names.
- group autocmd group name. Refer to |autocmd-groups|.
+ group autocmd group name. Refer to |autocmd-groups|.
If this group doesn't exist then it is
created. If not specified or empty, then the
default group is used.
nested boolean flag, set to v:true to add a nested
autocmd. Refer to |autocmd-nested|.
once boolean flag, set to v:true to add an autocmd
- which executes only once. Refer to
+ which executes only once. Refer to
|autocmd-once|.
- pattern autocmd pattern string. Refer to
+ pattern autocmd pattern string. Refer to
|autocmd-patterns|. If "bufnr" item is
present, then this item is ignored. This can
be a String with a single pattern or a List of
@@ -1057,7 +1057,8 @@ autocmd_add({acmds}) *autocmd_add()*
commands associated with the specified autocmd
event and group and add the {cmd}. This is
useful to avoid adding the same command
- multiple times for an autocmd event in a group.
+ multiple times for an autocmd event in a
+ group.

Returns v:true on success and v:false on failure.
Examples: >
@@ -1080,21 +1081,21 @@ autocmd_delete({acmds}) *autocmd_delete()*

The {acmds} argument is a List where each item is a Dict with
the following optional items:
- bufnr buffer number to delete a buffer-local autocmd.
- If this item is specified, then the "pattern"
- item is ignored.
+ bufnr buffer number to delete a buffer-local
+ autocmd. If this item is specified, then the
+ "pattern" item is ignored.
cmd Ex command for this autocmd event
- event autocmd event name. Refer to |autocmd-events|.
+ event autocmd event name. Refer to |autocmd-events|.
If '*' then all the autocmd events in this
group are deleted.
- group autocmd group name. Refer to |autocmd-groups|.
+ group autocmd group name. Refer to |autocmd-groups|.
If not specified or empty, then the default
group is used.
nested set to v:true for a nested autocmd.
Refer to |autocmd-nested|.
once set to v:true for an autocmd which executes
- only once. Refer to |autocmd-once|.
- pattern autocmd pattern string. Refer to
+ only once. Refer to |autocmd-once|.
+ pattern autocmd pattern string. Refer to
|autocmd-patterns|. If "bufnr" item is
present, then this item is ignored.

@@ -1128,22 +1129,22 @@ autocmd_delete({acmds}) *autocmd_delete()*


autocmd_get([{opts}]) *autocmd_get()*
- Returns a |List| of autocmds. If {opts} is not supplied, then
+ Returns a |List| of autocmds. If {opts} is not supplied, then
returns the autocmds for all the events in all the groups.

The optional {opts} Dict argument supports the following
items:
- group Autocmd group name. If specified, returns only
- the autocmds defined in this group. If the
- specified group doesn't exist, results in an
- error message. If set to an empty string,
+ group Autocmd group name. If specified, returns
+ only the autocmds defined in this group. If
+ the specified group doesn't exist, results in
+ an error message. If set to an empty string,
then the default autocmd group is used.
- event Autocmd event name. If specified, returns only
- the autocmds defined for this event. If set
- to "*", then returns autocmds for all the
+ event Autocmd event name. If specified, returns
+ only the autocmds defined for this event. If
+ set to "*", then returns autocmds for all the
events. If the specified event doesn't exist,
results in an error message.
- pattern Autocmd pattern. If specified, returns only
+ pattern Autocmd pattern. If specified, returns only
the autocmds defined for this pattern.
A combination of the above three times can be supplied in
{opts}.
@@ -1155,11 +1156,12 @@ autocmd_get([{opts}]) *autocmd_get()*
event Autocmd event name.
group Autocmd group name.
nested Boolean flag, set to v:true for a nested
- autocmd. See |autocmd-nested|.
+ autocmd. See |autocmd-nested|.
once Boolean flag, set to v:true, if the autocmd
- will be executed only once. See |autocmd-once|.
+ will be executed only once. See |autocmd-once|.
pattern Autocmd pattern. For a buffer-local
- autocmd, this will be of the form "<buffer=n>".
+ autocmd, this will be of the form
+ "<buffer=n>".
If there are multiple commands for an autocmd event in a
group, then separate items are returned for each command.

@@ -1510,7 +1512,7 @@ bufnr([{buf} [, {create}]]) *bufnr()*
{create} argument is present and TRUE, a new, unlisted,
buffer is created and its number is returned. Example: >
let newbuf = bufnr('Scratch001', 1)
-< Using an empty name uses the current buffer. To create a new
+< Using an empty name uses the current buffer. To create a new
buffer with an empty name use |bufadd()|.

bufnr("$") is the last buffer: >
@@ -1698,7 +1700,8 @@ char2nr({string} [, {utf8}]) *char2nr()*
Examples: >
char2nr(" ") returns 32
char2nr("ABC") returns 65
-< When {utf8} is omitted or zero, the current 'encoding' is used.
+< When {utf8} is omitted or zero, the current 'encoding' is
+ used.
Example for "utf-8": >
char2nr("á") returns 225
char2nr("á"[0]) returns 195
@@ -1763,7 +1766,7 @@ charidx({string}, {idx} [, {countcc} [, {utf16}]])
index in the String {expr} instead of as the byte index.

Returns -1 if the arguments are invalid or if there are less
- than {idx} bytes. If there are exactly {idx} bytes the length
+ than {idx} bytes. If there are exactly {idx} bytes the length
of the string in characters is returned.

An error is given and -1 is returned if the first argument is
@@ -1855,7 +1858,7 @@ cmdcomplete_info() *cmdcomplete_info()*
completion began.
pum_visible |TRUE| if popup menu is visible.
See |pumvisible()|.
- matches List of all completion candidates. Each item
+ matches List of all completion candidates. Each item
is a string.
selected Selected item index. First index is zero.
Index is -1 if no item is selected (showing
@@ -1877,7 +1880,7 @@ col({expr} [, {winid}]) *col()*
When {expr} is "$", it means the end of the cursor line, so
the result is the number of bytes in the cursor line plus one.
Additionally {expr} can be [lnum, col]: a |List| with the line
- and column number. Most useful when the column is "$", to get
+ and column number. Most useful when the column is "$", to get
the last column of a specific line. When "lnum" or "col" is
out of range then col() returns zero.

@@ -1914,7 +1917,7 @@ col({expr} [, {winid}]) *col()*


complete({startcol}, {matches}) *complete()* *E785*
- Set the matches for Insert mode completion. Can only be
+ Set the matches for Insert mode completion. Can only be
used in Insert mode. Typically invoked from a mapping with
CTRL-R = (see |i_CTRL-R|), but may also be called from a
|<Cmd>| or |<ScriptCmd>| mapping. It does not work after
@@ -2001,12 +2004,13 @@ complete_info([{what}]) *complete_info()*
See |complete_info_mode| for the values.
pum_visible |TRUE| if popup menu is visible.
See |pumvisible()|.
- items List of all completion candidates. Each item
+ items List of all completion candidates. Each item
is a dictionary containing the entries "word",
- "abbr", "menu", "kind", "info" and "user_data".
+ "abbr", "menu", "kind", "info" and
+ "user_data".
See |complete-items|.
matches Same as "items", but only returns items that
- are matching current query. If both "matches"
+ are matching current query. If both "matches"
and "items" are in "what", the returned list
will still be named "items", but each item
will have an additional "match" field.
@@ -2045,7 +2049,7 @@ complete_info([{what}]) *complete_info()*
{what} are silently ignored.

To get the position and size of the popup menu, see
- |pum_getpos()|. It's also available in |v:event| during the
+ |pum_getpos()|. It's also available in |v:event| during the
|CompleteChanged| event.

Returns an empty |Dictionary| on error.
@@ -2065,13 +2069,13 @@ complete_info([{what}]) *complete_info()*

complete_match([{lnum}, {col}]) *complete_match()*
Searches backward from the given position and returns a List
- of matches according to the 'isexpand' option. When no
+ of matches according to the 'isexpand' option. When no
arguments are provided, uses the current cursor position.

Each match is represented as a List containing
[startcol, trigger_text] where:
- startcol: column position where completion should start,
- or -1 if no trigger position is found. For multi-character
+ or -1 if no trigger position is found. For multi-character
triggers, returns the column of the first character.
- trigger_text: the matching trigger string from 'isexpand',
or empty string if no match was found or when using the
@@ -2228,7 +2232,7 @@ count({comp}, {expr} [, {ic} [, {start}]]) *count()* *E706*
When {ic} is given and it's |TRUE| then case is ignored.

When {comp} is a string then the number of not overlapping
- occurrences of {expr} is returned. Zero is returned when
+ occurrences of {expr} is returned. Zero is returned when
{expr} is an empty string.

Can also be used as a |method|: >
@@ -2322,7 +2326,7 @@ cursor({list})
debugbreak({pid}) *debugbreak()*
Specifically used to interrupt a program being debugged. It
will cause process {pid} to get a SIGTRAP. Behavior for other
- processes is undefined. See |terminal-debugger|.
+ processes is undefined. See |terminal-debugger|.
{only available on MS-Windows}

Returns |TRUE| if successfully interrupted the program.
@@ -2397,13 +2401,13 @@ deletebufline({buf}, {first} [, {last}]) *deletebufline()*
If {last} is omitted then delete line {first} only.
On success 0 is returned, on failure 1 is returned.

- This function works only for loaded buffers. First call
+ This function works only for loaded buffers. First call
|bufload()| if needed.

For the use of {buf}, see |bufname()| above.

- {first} and {last} are used like with |getline()|. Note that
- when using |line()| this refers to the current buffer. Use "$"
+ {first} and {last} are used like with |getline()|. Note that
+ when using |line()| this refers to the current buffer. Use "$"
to refer to the last line in buffer {buf}.

Can also be used as a |method|: >
@@ -2640,7 +2644,7 @@ digraph_setlist({digraphlist}) *digraph_setlist()*

echoraw({string}) *echoraw()*
Output {string} as-is, including unprintable characters.
- This can be used to output a terminal code. For example, to
+ This can be used to output a terminal code. For example, to
disable modifyOtherKeys: >
call echoraw(&t_TE)
< and to enable it again: >
@@ -2673,7 +2677,7 @@ empty({expr}) *empty()*


environ() *environ()*
- Return all of environment variables as dictionary. You can
+ Return all of environment variables as dictionary. You can
check if an environment variable exists like this: >
:echo has_key(environ(), 'HOME')
< Note that the variable name may be CamelCase; to ignore case
@@ -3157,21 +3161,21 @@ feedkeys({string} [, {mode}]) *feedkeys()*
{string}.

To include special keys into {string}, use double-quotes
- and "\..." notation |expr-quote|. For example,
- feedkeys("\<CR>") simulates pressing of the <Enter> key. But
+ and "\..." notation |expr-quote|. For example,
+ feedkeys("\<CR>") simulates pressing of the <Enter> key. But
feedkeys('\<CR>') pushes 5 characters.
A special code that might be useful is <Ignore>, it exits the
wait for a character without doing anything. *<Ignore>*

{mode} is a String, which can contain these character flags:
- 'm' Remap keys. This is default. If {mode} is absent,
+ 'm' Remap keys. This is default. If {mode} is absent,
keys are remapped.
'n' Do not remap keys.
't' Handle keys as if typed; otherwise they are handled as
if coming from a mapping. This matters for undo,
opening folds, etc.
'L' Lowlevel input. Only works for Unix or when using the
- GUI. Keys are used as if they were coming from the
+ GUI. Keys are used as if they were coming from the
terminal. Other flags are not used. *E980*
When a CTRL-C interrupts and 't' is included it sets
the internal "got_int" flag.
@@ -3191,7 +3195,7 @@ feedkeys({string} [, {mode}]) *feedkeys()*
legacy script syntax applies, "s:var" does not work,
etc. Note that if the string being fed sets a script
context this still applies.
- '!' When used with 'x' will not end Insert mode. Can be
+ '!' When used with 'x' will not end Insert mode. Can be
used in a test when a timer is set to exit Insert mode
a little later. Useful for testing CursorHoldI.

@@ -3204,7 +3208,7 @@ feedkeys({string} [, {mode}]) *feedkeys()*


filecopy({from}, {to}) *filecopy()*
- Copy the file pointed to by the name {from} to {to}. The
+ Copy the file pointed to by the name {from} to {to}. The
result is a Number, which is |TRUE| if the file was copied
successfully, and |FALSE| when it failed.
If a file with name {to} already exists, it will fail.
@@ -3265,7 +3269,7 @@ filter({expr1}, {expr2}) *filter()*
of the current item. For a |Dictionary| |v:key| has the key
of the current item and for a |List| |v:key| has the index of
the current item. For a |Blob| |v:key| has the index of the
- current byte. For a |String| |v:key| has the index of the
+ current byte. For a |String| |v:key| has the index of the
current character.
Examples: >
call filter(mylist, 'v:val !~ "OLD"')
@@ -3307,8 +3311,8 @@ filter({expr1}, {expr2}) *filter()*
or a new |Blob| or |String|.
When an error is encountered while evaluating {expr2} no
further items in {expr1} are processed.
- When {expr2} is a Funcref errors inside a function are ignored,
- unless it was defined with the "abort" flag.
+ When {expr2} is a Funcref errors inside a function are
+ ignored, unless it was defined with the "abort" flag.

Can also be used as a |method|: >
mylist->filter(expr2)
@@ -3588,7 +3592,7 @@ foldtextresult({lnum}) *foldtextresult()*
foreach({expr1}, {expr2}) *foreach()* *E1525*
{expr1} must be a |List|, |Tuple|, |String|, |Blob| or
|Dictionary|.
- For each item in {expr1} execute {expr2}. {expr1} is not
+ For each item in {expr1} execute {expr2}. {expr1} is not
modified; its values may be, as with |:lockvar| 1. |E741|
See |map()| and |filter()| to modify {expr1}.

@@ -3598,7 +3602,7 @@ foreach({expr1}, {expr2}) *foreach()* *E1525*
of the current item. For a |Dictionary| |v:key| has the key
of the current item and for a |List| or a |Tuple| |v:key| has
the index of the current item. For a |Blob| |v:key| has the
- index of the current byte. For a |String| |v:key| has the
+ index of the current byte. For a |String| |v:key| has the
index of the current character.
Examples: >
call foreach(mylist, 'used[v:val] = true')
@@ -3619,8 +3623,8 @@ foreach({expr1}, {expr2}) *foreach()* *E1525*
Returns {expr1} in all cases.
When an error is encountered while executing {expr2} no
further items in {expr1} are processed.
- When {expr2} is a Funcref errors inside a function are ignored,
- unless it was defined with the "abort" flag.
+ When {expr2} is a Funcref errors inside a function are
+ ignored, unless it was defined with the "abort" flag.

Can also be used as a |method|: >
mylist->foreach(expr2)
@@ -3672,7 +3676,7 @@ funcref({name} [, {arglist}] [, {dict}]) *funcref()*
It only works for an autoloaded function if it has already
been loaded (to avoid mistakenly loading the autoload script
when only intending to use the function name, use |function()|
- instead). {name} cannot be a builtin function.
+ instead). {name} cannot be a builtin function.
Returns 0 on error.

Can also be used as a |method|: >
@@ -3688,7 +3692,7 @@ function({name} [, {arglist}] [, {dict}])

{name} can also be a Funcref or a partial. When it is a
partial the dict stored in it will be used and the {dict}
- argument is not allowed. E.g.: >
+ argument is not allowed. E.g.: >
let FuncWithArg = function(dict.Func, [arg])
let Broken = function(dict.Func, [arg], dict)
<
@@ -3697,8 +3701,8 @@ function({name} [, {arglist}] [, {dict}])
same function.

When {arglist} or {dict} is present this creates a partial.
- That means the argument list and/or the dictionary is stored in
- the Funcref and will be used when the Funcref is called.
+ That means the argument list and/or the dictionary is stored
+ in the Funcref and will be used when the Funcref is called.

The arguments are passed to the function in front of other
arguments, but after any argument from |method|. Example: >
@@ -3732,7 +3736,7 @@ function({name} [, {arglist}] [, {dict}])
call Callback('one', 'two', 'name')

< The Dictionary is only useful when calling a "dict" function.
- In that case the {dict} is passed in as "self". Example: >
+ In that case the {dict} is passed in as "self". Example: >
function Callback() dict
echo "called for " .. self.name
endfunction
@@ -4004,12 +4008,14 @@ getcellpixels() *getcellpixels()*
Returns a |List| of terminal cell pixel size.
List format is [xpixel, ypixel].

- Only works on Unix (terminal and gVim) and Windows (gVim only).
+ Only works on Unix (terminal and gVim) and Windows (gVim
+ only).
Returns [] on other systems or on failure.
- Note that there could be variations across different terminals.
+ Note that there could be variations across different
+ terminals.
On macOS, system Terminal.app returns sizes in points (before
- Retina scaling), whereas third-party terminals return raw pixel
- sizes (post Retina scaling).
+ Retina scaling), whereas third-party terminals return raw
+ pixel sizes (post Retina scaling).

Return type: list<any>

@@ -4024,8 +4030,8 @@ getcellwidths() *getcellwidths()*


getchangelist([{buf}]) *getchangelist()*
- Returns the |changelist| for the buffer {buf}. For the use
- of {buf}, see |bufname()| above. If buffer {buf} doesn't
+ Returns the |changelist| for the buffer {buf}. For the use
+ of {buf}, see |bufname()| above. If buffer {buf} doesn't
exist, an empty list is returned.

The returned list contains two entries: a list with the change
@@ -4036,7 +4042,7 @@ getchangelist([{buf}]) *getchangelist()*
coladd column offset for 'virtualedit'
lnum line number
If buffer {buf} is the current buffer, then the current
- position refers to the position in the list. For other
+ position refers to the position in the list. For other
buffers, it is set to the length of the list.

Can also be used as a |method|: >
@@ -4143,7 +4149,7 @@ getchar([{expr} [, {opts}]]) *getchar()*
:endfunction
<
You may also receive synthetic characters, such as
- |<CursorHold>|. Often you will want to ignore this and get
+ |<CursorHold>|. Often you will want to ignore this and get
another character: >
:function GetKey()
: let c = getchar()
@@ -4176,7 +4182,7 @@ getcharmod() *getcharmod()*


getcharpos({expr}) *getcharpos()*
- Get the position for String {expr}. Same as |getpos()| but the
+ Get the position for String {expr}. Same as |getpos()| but the
column number in the returned List is a character index
instead of a byte index.
If |getpos()| returns a very large column number, equal to
@@ -4300,7 +4306,7 @@ getcmdscreenpos() *getcmdscreenpos()*


getcmdtype() *getcmdtype()*
- Return the current command-line type. Possible return values
+ Return the current command-line type. Possible return values
are:
: normal Ex command
> debug mode command |debug-mode|
@@ -4318,15 +4324,15 @@ getcmdtype() *getcmdtype()*


getcmdwintype() *getcmdwintype()*
- Return the current |command-line-window| type. Possible return
- values are the same as |getcmdtype()|. Returns an empty string
+ Return the current |command-line-window| type. Possible return
+ values are the same as |getcmdtype()|. Returns an empty string
when not in the command-line window.

Return type: |String|


getcompletion({pat}, {type} [, {filtered}]) *getcompletion()*
- Return a list of command-line completion matches. The String
+ Return a list of command-line completion matches. The String
{type} argument specifies what for. The following completion
types are supported:

@@ -4383,10 +4389,10 @@ getcompletion({pat}, {type} [, {filtered}]) *getcompletion()*

If the optional {filtered} flag is set to 1, then 'wildignore'
is applied to filter the results. Otherwise all the matches
- are returned. The 'wildignorecase' option always applies.
+ are returned. The 'wildignorecase' option always applies.

If the 'wildoptions' option contains 'fuzzy', then fuzzy
- matching is used to get the completion matches. Otherwise
+ matching is used to get the completion matches. Otherwise
regular expression matching is used. Thus this function
follows the user preference, what happens on the command line.
If you do not want this you can make 'wildoptions' empty
@@ -4423,8 +4429,8 @@ getcurpos([{winid}])
cursor vertically. After |$| command it will be a very large
number equal to |v:maxcol|. Also see |getcursorcharpos()| and
|getpos()|.
- The first "bufnum" item is always zero. The byte position of
- the cursor is returned in 'col'. To get the character
+ The first "bufnum" item is always zero. The byte position of
+ the cursor is returned in 'col'. To get the character
position, use |getcursorcharpos()|.

The optional {winid} argument can specify the window. It can
@@ -4472,7 +4478,7 @@ getcwd([{winnr} [, {tabnr}]]) *getcwd()*
directory. See also |haslocaldir()|.

With {winnr} and {tabnr} return the local current directory of
- the window in the specified tab page. If {winnr} is -1 return
+ the window in the specified tab page. If {winnr} is -1 return
the working directory of the tabpage.
If {winnr} is zero use the current window, if {tabnr} is zero
use the current tabpage.
@@ -4679,19 +4685,19 @@ getloclist({nr} [, {what}]) *getloclist()*

For a location list window, the displayed location list is
returned. For an invalid window number {nr}, an empty list is
- returned. Otherwise, same as |getqflist()|.
+ returned. Otherwise, same as |getqflist()|.

If the optional {what} dictionary argument is supplied, then
- returns the items listed in {what} as a dictionary. Refer to
+ returns the items listed in {what} as a dictionary. Refer to
|getqflist()| for the supported items in {what}.

In addition to the items supported by |getqflist()| in {what},
the following item is supported by |getloclist()|:

filewinid id of the window used to display files
- from the location list. This field is
+ from the location list. This field is
applicable only when called from a
- location list window. See
+ location list window. See
|location-list-file-window| for more
details.

@@ -4852,7 +4858,7 @@ getpos({expr}) *getpos()*

For getting the cursor position see |getcurpos()|.
The column number in the returned List is the byte position
- within the line. To get the character position in the line,
+ within the line. To get the character position in the line,
use |getcharpos()|.

Note that for '< and '> Visual mode matters: when it is "V"
@@ -4898,7 +4904,7 @@ getqflist([{what}]) *getqflist()*
any type.

When there is no error list or it's empty, an empty list is
- returned. Quickfix list entries with a non-existing buffer
+ returned. Quickfix list entries with a non-existing buffer
number are returned with "bufnr" set to zero (Note: some
functions accept buffer number zero for the alternate buffer,
you may need to explicitly check for zero).
@@ -4911,12 +4917,12 @@ getqflist([{what}]) *getqflist()*
:endfor
<
If the optional {what} dictionary argument is supplied, then
- returns only the items listed in {what} as a dictionary. The
+ returns only the items listed in {what} as a dictionary. The
following string items are supported in {what}:
changedtick get the total number of changes made
to the list |quickfix-changedtick|
context get the |quickfix-context|
- efm errorformat to use when parsing "lines". If
+ efm errorformat to use when parsing "lines". If
not present, then the 'errorformat' option
value is used.
id get information for the quickfix list with
@@ -4930,24 +4936,24 @@ getqflist([{what}]) *getqflist()*
lines parse a list of lines using 'efm' and return
the resulting entries. Only a |List| type is
accepted. The current quickfix list is not
- modified. See |quickfix-parse|.
+ modified. See |quickfix-parse|.
nr get information for this quickfix list; zero
means the current quickfix list and "$" means
the last quickfix list
qfbufnr number of the buffer displayed in the quickfix
- window. Returns 0 if the quickfix buffer is
- not present. See |quickfix-buffer|.
+ window. Returns 0 if the quickfix buffer is
+ not present. See |quickfix-buffer|.
size number of entries in the quickfix list
title get the list title |quickfix-title|
winid get the quickfix |window-ID|
all all of the above quickfix properties
- Non-string items in {what} are ignored. To get the value of a
+ Non-string items in {what} are ignored. To get the value of a
particular item, set it to zero.
If "nr" is not present then the current quickfix list is used.
If both "nr" and a non-zero "id" are specified, then the list
specified by "id" is used.
To get the number of lists in the quickfix stack, set "nr" to
- "$" in {what}. The "nr" value in the returned dictionary
+ "$" in {what}. The "nr" value in the returned dictionary
contains the quickfix stack size.
When "lines" is specified, all the other items except "efm"
are ignored. The returned dictionary contains the entry
@@ -4956,22 +4962,23 @@ getqflist([{what}]) *getqflist()*
The returned dictionary contains the following entries:
changedtick total number of changes made to the
list |quickfix-changedtick|
- context quickfix list context. See |quickfix-context|
+ context quickfix list context. See |quickfix-context|
If not present, set to "".
- id quickfix list ID |quickfix-ID|. If not
+ id quickfix list ID |quickfix-ID|. If not
present, set to 0.
- idx index of the quickfix entry in the list. If not
- present, set to 0.
- items quickfix list entries. If not present, set to
+ idx index of the quickfix entry in the list. If
+ not present, set to 0.
+ items quickfix list entries. If not present, set to
an empty list.
- nr quickfix list number. If not present, set to 0
+ nr quickfix list number. If not present, set to
+ 0
qfbufnr number of the buffer displayed in the quickfix
- window. If not present, set to 0.
- size number of entries in the quickfix list. If not
- present, set to 0.
- title quickfix list title text. If not present, set
+ window. If not present, set to 0.
+ size number of entries in the quickfix list. If
+ not present, set to 0.
+ title quickfix list title text. If not present, set
to "".
- winid quickfix |window-ID|. If not present, set to 0
+ winid quickfix |window-ID|. If not present, set to 0

Examples (See also |getqflist-examples|): >
:echo getqflist({'all': 1})
@@ -4996,7 +5003,7 @@ getreg([{regname} [, 1 [, {list}]]]) *getreg()*
argument is ignored, thus you can always give it.

If {list} is present and |TRUE|, the result type is changed
- to |List|. Each list item is one text line. Use it if you care
+ to |List|. Each list item is one text line. Use it if you care
about zero bytes possibly present inside register: without
third argument both NLs and zero bytes are represented as NLs
(see |NL-used-for-Nul|).
@@ -5170,7 +5177,7 @@ getscriptinfo([{opts}]) *getscriptinfo()*

The optional Dict argument {opts} supports the following
optional items:
- name Script name match pattern. If specified,
+ name Script name match pattern. If specified,
and "sid" is not specified, information about
scripts with a name that match the pattern
"name" are returned.
@@ -5224,7 +5231,7 @@ getstacktrace() *getstacktrace()*

gettabinfo([{tabnr}]) *gettabinfo()*
If {tabnr} is not specified, then information about all the
- tab pages is returned as a |List|. Each List item is a
+ tab pages is returned as a |List|. Each List item is a
|Dictionary|. Otherwise, {tabnr} specifies the tab page
number and information about that one is returned. If the tab
page does not exist an empty List is returned.
@@ -5290,16 +5297,17 @@ gettabwinvar({tabnr}, {winnr}, {varname} [, {def}]) *gettabwinvar()*


gettagstack([{winnr}]) *gettagstack()*
- The result is a Dict, which is the tag stack of window {winnr}.
+ The result is a Dict, which is the tag stack of window
+ {winnr}.
{winnr} can be the window number or the |window-ID|.
When {winnr} is not specified, the current window is used.
When window {winnr} doesn't exist, an empty Dict is returned.

The returned dictionary contains the following entries:
- curidx Current index in the stack. When at
+ curidx Current index in the stack. When at
top of the stack, set to (length + 1).
Index of bottom of the stack is 1.
- items List of items in the stack. Each item
+ items List of items in the stack. Each item
is a dictionary containing the
entries described below.
length Number of entries in the stack.
@@ -5310,9 +5318,9 @@ gettagstack([{winnr}]) *gettagstack()*
from cursor position before the tag jump.
See |getpos()| for the format of the
returned list.
- matchnr current matching tag number. Used when
- multiple matching tags are found for a
- name.
+ matchnr current matching tag number. Used
+ when multiple matching tags are found
+ for a name.
tagname name of the tag

See |tagstack| for more information about the tag stack.
@@ -5417,7 +5425,7 @@ getwinpos([{timeout}]) *getwinpos()*

getwinposx() *getwinposx()*
The result is a Number, which is the X coordinate in pixels of
- the left hand side of the GUI Vim window. Also works for an
+ the left hand side of the GUI Vim window. Also works for an
xterm (uses a timeout of 100 msec).
The result will be -1 if the information is not available
(e.g. on the Wayland backend).
@@ -5460,7 +5468,7 @@ glob({expr} [, {nosuf} [, {list} [, {alllinks}]]]) *glob()*
'wildignorecase' always applies.

When {list} is present and it is |TRUE| the result is a |List|
- with all matching files. The advantage of using a List is,
+ with all matching files. The advantage of using a List is,
you also get filenames containing newlines correctly.
Otherwise the result is a String and when there are several
matches, they are separated by <NL> characters.
@@ -5530,10 +5538,10 @@ globpath({path}, {expr} [, {nosuf} [, {list} [, {alllinks}]]])
'suffixes' affect the ordering of matches.

When {list} is present and it is |TRUE| the result is a |List|
- with all matching files. The advantage of using a List is, you
- also get filenames containing newlines correctly. Otherwise
- the result is a String and when there are several matches,
- they are separated by <NL> characters. Example: >
+ with all matching files. The advantage of using a List is,
+ you also get filenames containing newlines correctly.
+ Otherwise the result is a String and when there are several
+ matches, they are separated by <NL> characters. Example: >
:echo globpath(&rtp, "syntax/c.vim", 0, 1)
<
{alllinks} is used as with |glob()|.
@@ -5804,24 +5812,24 @@ hlget([{name} [, {resolve}]]) *hlget()*
cleared boolean flag, set to v:true if the highlight
group attributes are cleared or not yet
specified. See |highlight-clear|.
- cterm cterm attributes. See |highlight-cterm|.
+ cterm cterm attributes. See |highlight-cterm|.
ctermbg cterm background color.
See |highlight-ctermbg|.
ctermfg cterm foreground color.
See |highlight-ctermfg|.
ctermul cterm underline color. See |highlight-ctermul|.
default boolean flag, set to v:true if the highlight
- group link is a default link. See
+ group link is a default link. See
|highlight-default|.
font highlight group font. See |highlight-font|.
- gui gui attributes. See |highlight-gui|.
+ gui gui attributes. See |highlight-gui|.
guibg gui background color. See |highlight-guibg|.
guifg gui foreground color. See |highlight-guifg|.
guisp gui special color. See |highlight-guisp|.
id highlight group ID.
linksto linked highlight group name.
See |:highlight-link|.
- name highlight group name. See |group-name|.
+ name highlight group name. See |group-name|.
start start terminal keycode. See |highlight-start|.
stop stop terminal keycode. See |highlight-stop|.
term term attributes. See |highlight-term|.
@@ -5845,7 +5853,7 @@ hlget([{name} [, {resolve}]]) *hlget()*
hlset({list}) *hlset()*
Creates or modifies the attributes of a List of highlight
groups. Each item in {list} is a dictionary containing the
- attributes of a highlight group. See |hlget()| for the list of
+ attributes of a highlight group. See |hlget()| for the list of
supported items in this dictionary.

In addition to the items described in |hlget()|, the following
@@ -5947,16 +5955,16 @@ iconv({string}, {from}, {to}) *iconv()*

id({item}) *id()*
The result is a unique String associated with the {item} and
- not with the {item}'s contents. It is only valid while the
- {item} exists and is referenced. It is valid only in the
- instance of vim that produces the result. The whole idea is
+ not with the {item}'s contents. It is only valid while the
+ {item} exists and is referenced. It is valid only in the
+ instance of vim that produces the result. The whole idea is
that `id({item})` does not change if the contents of {item}
- changes. This is useful as a `key` for creating an identity
+ changes. This is useful as a `key` for creating an identity
dictionary, rather than one based on equals.

This operation does not reference {item} and there is no
- function to convert the `id` to the {item}. It may be useful to
- have a map of `id` to {item}. The following >
+ function to convert the `id` to the {item}. It may be useful to
+ have a map of `id` to {item}. The following >
var referenceMap: dict<any>
var id = item->id()
referenceMap[id] = item
@@ -5964,7 +5972,7 @@ id({item}) *id()*
way to get the {item} from the `id`.

{item} may be a List, Tuple, Dictionary, Object, Job, Channel
- or Blob. If the item is not a permitted type, or it is a null
+ or Blob. If the item is not a permitted type, or it is a null
value, then an empty String is returned.

Can also be used as a |method|: >
@@ -6160,7 +6168,8 @@ inputrestore() *inputrestore()*
Restore typeahead that was saved with a previous |inputsave()|.
Should be called the same number of times inputsave() is
called. Calling it more often is harmless though.
- Returns TRUE when there is nothing to restore, FALSE otherwise.
+ Returns TRUE when there is nothing to restore, FALSE
+ otherwise.

Return type: |Number|

@@ -6259,10 +6268,11 @@ invert({expr}) *invert()*
isabsolutepath({path}) *isabsolutepath()*
The result is a Number, which is |TRUE| when {path} is an
absolute path.
- On Unix, a path is considered absolute when it starts with '/'.
- On MS-Windows, it is considered absolute when it starts with an
- optional drive prefix and is followed by a '\' or '/'. UNC paths
- are always absolute.
+ On Unix, a path is considered absolute when it starts with
+ '/'.
+ On MS-Windows, it is considered absolute when it starts with
+ an optional drive prefix and is followed by a '\' or '/'. UNC
+ paths are always absolute.
Example: >
echo isabsolutepath('/usr/share/') " 1
echo isabsolutepath('./foobar') " 0
@@ -6408,7 +6418,7 @@ js_encode({expr}) *js_encode()*
[1,,{one:1},,] ~
While json_encode() would produce:
[1,null,{"one":1},null] ~
- This encoding is valid for JavaScript. It is more efficient
+ This encoding is valid for JavaScript. It is more efficient
than JSON, especially when using an array with optional items.

Can also be used as a |method|: >
@@ -6427,7 +6437,7 @@ json_decode({string}) *json_decode()* *E491*
- Integer keys are accepted in objects, e.g. {1:2} is the
same as {"1":2}.
- More floating point numbers are recognized, e.g. "1." for
- "1.0", or "001.2" for "1.2". Special floating point values
+ "1.0", or "001.2" for "1.2". Special floating point values
"Infinity", "-Infinity" and "NaN" (capitalization ignored)
are accepted.
- Leading zeroes in integer numbers are ignored, e.g. "012"
@@ -6690,7 +6700,8 @@ list2str({list} [, {utf8}]) *list2str()*
join(map(list, {nr, val -> nr2char(val)}), '')
< |str2list()| does the opposite.

- When {utf8} is omitted or zero, the current 'encoding' is used.
+ When {utf8} is omitted or zero, the current 'encoding' is
+ used.
When {utf8} is TRUE, always return UTF-8 characters.
With UTF-8 composing characters work as expected: >
list2str([97, 769]) returns "á"
@@ -6725,7 +6736,7 @@ list2tuple({list}) *list2tuple()*
listener_add({callback} [, {buf} [, {unbuffered}]]) *listener_add()*
Add a callback function that will be invoked when changes have
been made to buffer {buf}.
- {buf} refers to a buffer name or number. For the accepted
+ {buf} refers to a buffer name or number. For the accepted
values, see |bufname()|. When {buf} is omitted the current
buffer is used.
Returns a unique ID that can be passed to |listener_remove()|.
@@ -6791,16 +6802,16 @@ listener_add({callback} [, {buf} [, {unbuffered}]]) *listener_add()*

Because of the third trigger reason for triggering a callback
listed above, the line numbers passed to the callback are not
- guaranteed to be valid. If this is a problem then make
+ guaranteed to be valid. If this is a problem then make
{unbuffered} |TRUE|.

When {unbuffered} is |TRUE| the {callback} is invoked for every
- single change. The changes list only holds a single dictionary
- and the "start", "end" and "added" values in the dictionary are
- the same as the corresponding callback arguments. The line
- numbers are valid when the callback is invoked, but later
- changes may make them invalid, thus keeping a copy for later
- might not work.
+ single change. The changes list only holds a single
+ dictionary and the "start", "end" and "added" values in the
+ dictionary are the same as the corresponding callback
+ arguments. The line numbers are valid when the callback is
+ invoked, but later changes may make them invalid, thus keeping
+ a copy for later might not work.

The {callback} is invoked with the text locked, see
|textlock|. If you do need to make changes to the buffer, use
@@ -6827,7 +6838,7 @@ listener_flush([{buf}]) *listener_flush()*
Invoke listener callbacks for buffer {buf}. If there are no
pending changes then no callbacks are invoked.

- {buf} refers to a buffer name or number. For the accepted
+ {buf} refers to a buffer name or number. For the accepted
values, see |bufname()|. When {buf} is omitted the current
buffer is used.

@@ -6890,7 +6901,7 @@ log10({expr}) *log10()*

luaeval({expr} [, {expr}]) *luaeval()*
Evaluate Lua expression {expr} and return its result converted
- to Vim data structures. Second {expr} may hold additional
+ to Vim data structures. Second {expr} may hold additional
argument accessible as _A inside first {expr}.
Strings are returned as they are.
Boolean objects are converted to numbers.
@@ -6927,7 +6938,7 @@ map({expr1}, {expr2}) *map()*
of the current item. For a |Dictionary| |v:key| has the key
of the current item and for a |List| |v:key| has the index of
the current item. For a |Blob| |v:key| has the index of the
- current byte. For a |String| |v:key| has the index of the
+ current byte. For a |String| |v:key| has the index of the
current character.
Example: >
:call map(mylist, '"> " .. v:val .. " <"')
@@ -6945,7 +6956,7 @@ map({expr1}, {expr2}) *map()*
accepts one argument, but with a Vim9 lambda you get "E1106:
One argument too many", the number of arguments must match.

- The function must return the new value of the item. Example
+ The function must return the new value of the item. Example
that changes each value by "key-value": >
func KeyValue(key, val)
return a:key .. '-' .. a:val
@@ -6966,8 +6977,8 @@ map({expr1}, {expr2}) *map()*
or a new |Blob| or |String|.
When an error is encountered while evaluating {expr2} no
further items in {expr1} are processed.
- When {expr2} is a Funcref errors inside a function are ignored,
- unless it was defined with the "abort" flag.
+ When {expr2} is a Funcref errors inside a function are
+ ignored, unless it was defined with the "abort" flag.

Can also be used as a |method|: >
mylist->map(expr2)
@@ -6980,8 +6991,8 @@ maparg({name} [, {mode} [, {abbr} [, {dict}]]]) *maparg()*
When {dict} is omitted or zero: Return the rhs of mapping
{name} in mode {mode}. The returned String has special
characters translated like in the output of the ":map" command
- listing. When {dict} is TRUE a dictionary is returned, see
- below. To get a list of all mappings see |maplist()|.
+ listing. When {dict} is TRUE a dictionary is returned, see
+ below. To get a list of all mappings see |maplist()|.

When there is no mapping for {name}, an empty String is
returned if {dict} is FALSE, otherwise returns an empty Dict.
@@ -7020,7 +7031,7 @@ maparg({name} [, {mode} [, {abbr} [, {dict}]]]) *maparg()*
"script" 1 if mapping was defined with <script>.
"expr" 1 for an expression mapping (|:map-<expr>|).
"buffer" 1 for a buffer local mapping (|:map-local|).
- "mode" Modes for which the mapping is defined. In
+ "mode" Modes for which the mapping is defined. In
addition to the modes mentioned above, these
characters will be used:
" " Normal, Visual and Operator-pending
@@ -7036,7 +7047,7 @@ maparg({name} [, {mode} [, {abbr} [, {dict}]]]) *maparg()*
"abbr" True if this is an abbreviation |abbreviations|.
"mode_bits" Vim's internal binary representation of "mode".
|mapset()| ignores this; only "mode" is used.
- See |maplist()| for usage examples. The values
+ See |maplist()| for usage examples. The values
are from src/vim.h and may change in the future.

The dictionary can be used to restore a mapping with
@@ -7104,9 +7115,9 @@ maplist([{abbr}]) *maplist()*
echo maplist()->filter(
(_, m) => match(m.rhs, 'MultiMatch') >= 0)
< It can be tricky to find mappings for particular |:map-modes|.
- |mapping-dict|'s "mode_bits" can simplify this. For example,
+ |mapping-dict|'s "mode_bits" can simplify this. For example,
the mode_bits for Normal, Insert or Command-line modes are
- 0x19. To find all the mappings available in those modes you
+ 0x19. To find all the mappings available in those modes you
can do: >
vim9script
var saved_maps = []
@@ -7118,7 +7129,7 @@ maplist([{abbr}]) *maplist()*
echo saved_maps->mapnew((_, m) => m.lhs)
< The values of the mode_bits are defined in Vim's src/vim.h
file and they can be discovered at runtime using
- |:map-commands| and "maplist()". Example: >
+ |:map-commands| and "maplist()". Example: >
vim9script
omap xyzzy <Nop>
var op_bit = maplist()->filter(
@@ -7144,8 +7155,9 @@ mapset({dict})
Restore a mapping from a dictionary, possibly returned by
|maparg()| or |maplist()|. A buffer mapping, when dict.buffer
is true, is set on the current buffer; it is up to the caller
- to ensure that the intended buffer is the current buffer. This
- feature allows copying mappings from one buffer to another.
+ to ensure that the intended buffer is the current buffer.
+ This feature allows copying mappings from one buffer to
+ another.
The dict.mode value may restore a single mapping that covers
more than one mode, like with mode values of '!', ' ', 'nox',
or 'v'. *E1276*
@@ -7284,9 +7296,9 @@ matchadd({group}, {pattern} [, {priority} [, {id} [, {dict}]]])
automatically chooses a free ID, which is at least 1000.

The optional {dict} argument allows for further custom
- values. Currently this is used to specify a match specific
+ values. Currently this is used to specify a match specific
conceal character that will be shown for |hl-Conceal|
- highlighted matches. The dict can have the following members:
+ highlighted matches. The dict can have the following members:

conceal Special character to show instead of the
match (only for |hl-Conceal| highlighted
@@ -7318,9 +7330,9 @@ matchadd({group}, {pattern} [, {priority} [, {id} [, {dict}]]])
*matchaddpos()*
matchaddpos({group}, {pos} [, {priority} [, {id} [, {dict}]]])
Same as |matchadd()|, but requires a list of positions {pos}
- instead of a pattern. This command is faster than |matchadd()|
+ instead of a pattern. This command is faster than |matchadd()|
because it does not handle regular expressions and it sets
- buffer line boundaries to redraw screen. It is supposed to be
+ buffer line boundaries to redraw screen. It is supposed to be
used when fast match additions and deletions are required, for
example to highlight matching parentheses.

@@ -7328,14 +7340,14 @@ matchaddpos({group}, {pos} [, {priority} [, {id} [, {dict}]]])
these:
- A number. This whole line will be highlighted. The first
line has number 1.
- - A list with one number, e.g., [23]. The whole line with this
- number will be highlighted.
- - A list with two numbers, e.g., [23, 11]. The first number is
- the line number, the second one is the column number (first
- column is 1, the value must correspond to the byte index as
- |col()| would return). The character at this position will
- be highlighted.
- - A list with three numbers, e.g., [23, 11, 3]. As above, but
+ - A list with one number, e.g., [23]. The whole line with
+ this number will be highlighted.
+ - A list with two numbers, e.g., [23, 11]. The first number
+ is the line number, the second one is the column number
+ (first column is 1, the value must correspond to the byte
+ index as |col()| would return). The character at this
+ position will be highlighted.
+ - A list with three numbers, e.g., [23, 11, 3]. As above, but
the third number gives the length of the highlight in bytes.

Returns -1 on error.
@@ -7365,7 +7377,7 @@ matcharg({nr}) *matcharg()*
When there is no match item set returns ['', ''].
This is useful to save and restore a |:match|.
Highlighting matches using the |:match| commands are limited
- to three matches. |matchadd()| does not have this limitation.
+ to three matches. |matchadd()| does not have this limitation.

Can also be used as a |method|: >
GetMatch()->matcharg()
@@ -7389,7 +7401,7 @@ matchbufline({buf}, {pat}, {lnum}, {end}, [, {dict}])
text matched string
Note that there can be multiple matches in a single line.

- This function works only for loaded buffers. First call
+ This function works only for loaded buffers. First call
|bufload()| if needed.

See |match-pattern| for information about the effect of some
@@ -7466,7 +7478,7 @@ matchend({expr}, {pat} [, {start} [, {count}]]) *matchend()*

matchfuzzy({list}, {str} [, {dict}]) *matchfuzzy()*
If {list} is a list of strings, then returns a |List| with all
- the strings in {list} that fuzzy match {str}. The strings in
+ the strings in {list} that fuzzy match {str}. The strings in
the returned list are sorted based on the matching score.

The optional {dict} argument always supports the following
@@ -7480,7 +7492,7 @@ matchfuzzy({list}, {str} [, {dict}]) *matchfuzzy()*
If {list} is a list of dictionaries, then the optional {dict}
argument supports the following additional items:
key Key of the item which is fuzzy matched against
- {str}. The value of this item should be a
+ {str}. The value of this item should be a
string.
text_cb |Funcref| that will be called for every item
in {list} to get the text for fuzzy matching.
@@ -7496,7 +7508,7 @@ matchfuzzy({list}, {str} [, {dict}]) *matchfuzzy()*
then the list of strings that have all the words is returned.

If there are no matching strings or there is an error, then an
- empty list is returned. If length of {str} is greater than
+ empty list is returned. If length of {str} is greater than
256, then returns an empty list.

When {limit} is given, matchfuzzy() will find up to this
@@ -7659,7 +7671,7 @@ matchstrpos({expr}, {pat} [, {start} [, {count}]]) *matchstrpos()*


max({expr}) *max()*
- Return the maximum value of all items in {expr}. Example: >
+ Return the maximum value of all items in {expr}. Example: >
echo max([apples, pears, oranges])

< {expr} can be a |List|, a |Tuple| or a |Dictionary|. For a
@@ -7677,8 +7689,8 @@ max({expr}) *max()*

menu_info({name} [, {mode}]) *menu_info()*
Return information about the specified menu {name} in
- mode {mode}. The menu name should be specified without the
- shortcut character ('&'). If {name} is "", then the top-level
+ mode {mode}. The menu name should be specified without the
+ shortcut character ('&'). If {name} is "", then the top-level
menu names are returned.

{mode} can be one of these strings:
@@ -7702,7 +7714,7 @@ menu_info({name} [, {mode}]) *menu_info()*
icon name of the icon file (for toolbar)
|toolbar-icon|
iconidx index of a built-in icon
- modes modes for which the menu is defined. In
+ modes modes for which the menu is defined. In
addition to the modes mentioned above, these
characters will be used:
" " Normal, Visual and Operator-pending
@@ -7710,11 +7722,11 @@ menu_info({name} [, {mode}]) *menu_info()*
noremenu v:true if the {rhs} of the menu item is not
remappable else v:false.
priority menu order priority |menu-priority|
- rhs right-hand-side of the menu item. The returned
- string has special characters translated like
- in the output of the ":menu" command listing.
- When the {rhs} of a menu item is empty, then
- "<Nop>" is returned.
+ rhs right-hand-side of the menu item. The
+ returned string has special characters
+ translated like in the output of the ":menu"
+ command listing. When the {rhs} of a menu
+ item is empty, then "<Nop>" is returned.
script v:true if script-local remapping of {rhs} is
allowed else v:false. See |:menu-script|.
shortcut shortcut key (character after '&' in
@@ -7869,8 +7881,8 @@ mode([{expr}]) *mode()*
with |remote_expr()| In most other places it always returns
"c" or "n".
Note that in the future more modes and more specific modes may
- be added. It's better not to compare the whole string but only
- the leading character(s).
+ be added. It's better not to compare the whole string but
+ only the leading character(s).
Also see |visualmode()|.

Can also be used as a |method|: >
@@ -7923,7 +7935,7 @@ nextnonblank({lnum}) *nextnonblank()*
ngettext({single}, {plural}, {number}[, {domain}) *ngettext()*
Return a string that contains the correct value for a
message based on the rules for plural form(s) in
- a language. Examples: >
+ a language. Examples: >
ngettext("File", "Files", 2) # returns "Files"
<
Can be used as a |method|: >
@@ -7997,8 +8009,8 @@ pathshorten({path} [, {len}]) *pathshorten()*

perleval({expr}) *perleval()*
Evaluate Perl expression {expr} in scalar context and return
- its result converted to Vim data structures. If value can't be
- converted, it is returned as a string Perl representation.
+ its result converted to Vim data structures. If value can't
+ be converted, it is returned as a string Perl representation.
Note: If you want an array or hash, {expr} must return a
reference to it.
Example: >
@@ -8105,8 +8117,8 @@ printf({fmt}, {expr1} ...) *printf()*
% [pos-argument] [flags] [field-width] [.precision] type

pos-argument
- At most one positional argument specifier. These
- take the form {n$}, where n is >= 1.
+ At most one positional argument specifier. These take
+ the form {n$}, where n is >= 1.

flags
Zero or more of the following flags:
@@ -8182,7 +8194,7 @@ printf({fmt}, {expr1} ...) *printf()*
positional argument specifier, and a '*' is used to indicate
that a number argument is to be used to specify the width or
precision, the argument(s) to be used must also be specified
- using a {n$} positional argument specifier. See |printf-$|.
+ using a {n$} positional argument specifier. See |printf-$|.

The conversion specifiers and their meanings are:

@@ -8209,7 +8221,7 @@ printf({fmt}, {expr1} ...) *printf()*
The b and B conversion specifiers never take a width
modifier and always assume their argument is a 64 bit
integer.
- Generally, these modifiers are not useful. They are
+ Generally, these modifiers are not useful. They are
ignored when type is known from the argument.

i alias for d
@@ -8281,9 +8293,9 @@ printf({fmt}, {expr1} ...) *printf()*
*printf-$*
In certain languages, error and informative messages are
more readable when the order of words is different from the
- corresponding message in English. To accommodate translations
+ corresponding message in English. To accommodate translations
having a different word order, positional arguments may be
- used to indicate this. For instance: >
+ used to indicate this. For instance: >

#, c-format
msgid "%s returning %s"
@@ -8302,9 +8314,9 @@ printf({fmt}, {expr1} ...) *printf()*
"Bram", "Moolenaar")
< In Belgium, vim's creator's name is: Moolenaar Bram

- Width (and precision) can be specified using the '*' specifier.
- In this case, you must specify the field width position in the
- argument list. >
+ Width (and precision) can be specified using the '*'
+ specifier. In this case, you must specify the field width
+ position in the argument list. >

echo printf("%1$*2$.*3$d", 1, 2, 3)
< 001 >
@@ -8504,8 +8516,8 @@ py3eval({expr} [, {locals}]) *py3eval()*
Evaluate Python expression {expr} and return its result
converted to Vim data structures.
If a {locals} |Dictionary| is given, it defines set of local
- variables available in the expression. The keys are variable
- names and the values are the variable values. |Dictionary|,
+ variables available in the expression. The keys are variable
+ names and the values are the variable values. |Dictionary|,
|List| and |Tuple| values are referenced, and may be updated
by the expression (as if |python-bindeval| was used).
Numbers and strings are returned as they are (strings are
@@ -8655,8 +8667,8 @@ readdir({directory} [, {expr} [, {dict}]]) *readdir()*
readdir(dirname, {n -> n !~ '^\.\|\~$'})
< *E857*
The optional {dict} argument allows for further custom
- values. Currently this is used to specify if and how sorting
- should be performed. The dict can have the following members:
+ values. Currently this is used to specify if and how sorting
+ should be performed. The dict can have the following members:

sort How to sort the result returned from the system.
Valid values are:
@@ -8707,9 +8719,9 @@ readdirex({directory} [, {expr} [, {dict}]]) *readdirex()*
following items:
group Group name of the entry. (Only on Unix)
name Name of the entry.
- perm Permissions of the entry. See |getfperm()|.
- size Size of the entry. See |getfsize()|.
- time Timestamp of the entry. See |getftime()|.
+ perm Permissions of the entry. See |getfperm()|.
+ size Size of the entry. See |getfsize()|.
+ time Timestamp of the entry. See |getftime()|.
type Type of the entry.
On Unix, almost same as |getftype()| except:
Symlink to a dir "linkd"
@@ -8891,8 +8903,8 @@ reltimestr({time}) *reltimestr()*
call MyFunction()
echo reltimestr(reltime(start))
< Note that overhead for the commands will be added to the time.
- The accuracy depends on the system. Use reltimefloat() for the
- greatest accuracy which is nanoseconds on some systems.
+ The accuracy depends on the system. Use reltimefloat() for
+ the greatest accuracy which is nanoseconds on some systems.
Leading spaces are used to make the string align nicely. You
can use split() to remove it. >
echo split(reltimestr(reltime(start)))[0]
@@ -9132,7 +9144,7 @@ resolve({filename}) *resolve()* *E655*
On MS-Windows, when {filename} is a shortcut (a .lnk file),
returns the path the shortcut points to in a simplified form.
When {filename} is a symbolic link or junction point, return
- the full path to the target. If the target of junction is
+ the full path to the target. If the target of junction is
removed, return {filename}.
On Unix, repeat resolving symbolic links in all path
components of {filename} and return the simplified result.
@@ -9249,13 +9261,13 @@ screenchars({row}, {col}) *screenchars()*

screencol() *screencol()*
The result is a Number, which is the current screen column of
- the cursor. The leftmost column has number 1.
+ the cursor. The leftmost column has number 1.
This function is mainly used for testing.

Note: Always returns the current screen column, thus if used
in a command (e.g. ":echo screencol()") it will return the
column inside the command line, which is 1 when the command is
- executed. To get the cursor position in the file use one of
+ executed. To get the cursor position in the file use one of
the following mappings: >
nnoremap <expr> GG ":echom " .. screencol() .. "
"
nnoremap <silent> GG :echom screencol()<CR>
@@ -9341,7 +9353,7 @@ search({pattern} [, {flags} [, {stopline} [, {timeout} [, {skip}]]]])
If neither 'w' or 'W' is given, the 'wrapscan' option applies.

If the 's' flag is supplied, the ' mark is set, only if the
- cursor is moved. The 's' flag cannot be combined with the 'n'
+ cursor is moved. The 's' flag cannot be combined with the 'n'
flag.

'ignorecase', 'smartcase' and 'magic' are used.
@@ -9436,7 +9448,7 @@ searchcount([{options}]) *searchcount()*
without the "S" flag in 'shortmess'. This works even if
'shortmess' does contain the "S" flag.

- This returns a |Dictionary|. The dictionary is empty if the
+ This returns a |Dictionary|. The dictionary is empty if the
previous pattern was not set and "pattern" was not specified.

key type meaning ~
@@ -9453,10 +9465,10 @@ searchcount([{options}]) *searchcount()*
For {options} see further down.

To get the last search count when |n| or |N| was pressed, call
- this function with `recompute: 0` . This sometimes returns
+ this function with `recompute: 0` . This sometimes returns
wrong information because of 'maxsearchcount'.
If the count exceeded 'maxsearchcount', the result must be
- 'maxsearchcount' + 1. If you want to get correct information,
+ 'maxsearchcount' + 1. If you want to get correct information,
specify `recompute: 1`: >

" result == 'maxsearchcount' + 1 when many matches
@@ -9519,7 +9531,7 @@ searchcount([{options}]) *searchcount()*
" search again
call searchcount()
<
- {options} must be a |Dictionary|. It can contain:
+ {options} must be a |Dictionary|. It can contain:
key type meaning ~
recompute |Boolean| if |TRUE|, recompute the count
like |n| or |N| was executed.
@@ -9677,7 +9689,7 @@ searchpair({start}, {middle}, {end} [, {flags} [, {skip}
searchpairpos({start}, {middle}, {end} [, {flags} [, {skip}
[, {stopline} [, {timeout}]]]])
Same as |searchpair()|, but returns a |List| with the line and
- column position of the match. The first element of the |List|
+ column position of the match. The first element of the |List|
is the line number and the second element is the byte index of
the column position of the match. If no match is found,
returns [0, 0]. >
@@ -9691,9 +9703,9 @@ searchpairpos({start}, {middle}, {end} [, {flags} [, {skip}
*searchpos()*
searchpos({pattern} [, {flags} [, {stopline} [, {timeout} [, {skip}]]]])
Same as |search()|, but returns a |List| with the line and
- column position of the match. The first element of the |List|
+ column position of the match. The first element of the |List|
is the line number and the second element is the byte index of
- the column position of the match. If no match is found,
+ the column position of the match. If no match is found,
returns [0, 0].
Example: >
:let [lnum, col] = searchpos('mypattern', 'n')
@@ -9744,7 +9756,7 @@ setbufline({buf}, {lnum}, {text}) *setbufline()*
Set line {lnum} to {text} in buffer {buf}. This works like
|setline()| for the specified buffer.

- This function works only for loaded buffers. First call
+ This function works only for loaded buffers. First call
|bufload()| if needed.

To insert lines use |appendbufline()|.
@@ -9967,7 +9979,7 @@ setfperm({fname}, {mode}) *setfperm()* *chmod*

setline({lnum}, {text}) *setline()*
Set line {lnum} of the current buffer to {text}. To insert
- lines use |append()|. To set lines in another buffer use
+ lines use |append()|. To set lines in another buffer use
|setbufline()|.
Any text properties in {lnum} are cleared. See
|text-prop-cleared|
@@ -9979,8 +9991,8 @@ setline({lnum}, {text}) *setline()*
converted to a String. When {text} is an empty List then
nothing is changed and FALSE is returned.

- If this succeeds, FALSE is returned. If this fails (most likely
- because {lnum} is invalid) TRUE is returned.
+ If this succeeds, FALSE is returned. If this fails (most
+ likely because {lnum} is invalid) TRUE is returned.
In |Vim9| script an error is given if {lnum} is invalid.

Example: >
@@ -10016,7 +10028,7 @@ setloclist({nr}, {list} [, {action} [, {what}]]) *setloclist()*
For {action} see |setqflist-action|.

If the optional {what} dictionary argument is supplied, then
- only the items listed in {what} are set. Refer to |setqflist()|
+ only the items listed in {what} are set. Refer to |setqflist()|
for the list of supported keys in {what}.

Can also be used as a |method|, the base is passed as the
@@ -10060,10 +10072,10 @@ setpos({expr}, {list}) *setpos()*

"lnum" and "col" are the position in the buffer. The first
column is 1. Use a zero "lnum" to delete a mark. If "col" is
- smaller than 1 then 1 is used. To use the character count
+ smaller than 1 then 1 is used. To use the character count
instead of the byte count, use |setcharpos()|.

- The "off" number is only used when 'virtualedit' is set. Then
+ The "off" number is only used when 'virtualedit' is set. Then
it is the offset in screen columns from the start of the
character. E.g., a position within a <Tab> or after the last
character.
@@ -10099,14 +10111,14 @@ setqflist({list} [, {action} [, {what}]]) *setqflist()*
Create or replace or add to the quickfix list.

If the optional {what} dictionary argument is supplied, then
- only the items listed in {what} are set. The first {list}
+ only the items listed in {what} are set. The first {list}
argument is ignored. See below for the supported items in
{what}.
*setqflist-what*
- When {what} is not present, the items in {list} are used. Each
- item must be a dictionary. Non-dictionary items in {list} are
- ignored. Each dictionary item can contain the following
- entries:
+ When {what} is not present, the items in {list} are used.
+ Each item must be a dictionary. Non-dictionary items in
+ {list} are ignored. Each dictionary item can contain the
+ following entries:

bufnr buffer number; must be the number of a valid
buffer
@@ -10145,7 +10157,7 @@ setqflist({list} [, {action} [, {what}]]) *setqflist()*

{action} values: *setqflist-action* *E927*
'a' The items from {list} are added to the existing
- quickfix list. If there is no existing list, then a
+ quickfix list. If there is no existing list, then a
new list is created.

'r' The items from the current quickfix list are replaced
@@ -10159,23 +10171,23 @@ setqflist({list} [, {action} [, {what}]]) *setqflist()*
freed.

If {action} is not present or is set to ' ', then a new list
- is created. The new quickfix list is added after the current
+ is created. The new quickfix list is added after the current
quickfix list in the stack and all the following lists are
- freed. To add a new quickfix list at the end of the stack,
+ freed. To add a new quickfix list at the end of the stack,
set "nr" in {what} to "$".

The following items can be specified in dictionary {what}:
- context quickfix list context. See |quickfix-context|
+ context quickfix list context. See |quickfix-context|
efm errorformat to use when parsing text from
- "lines". If this is not present, then the
+ "lines". If this is not present, then the
'errorformat' option value is used.
See |quickfix-parse|
id quickfix list identifier |quickfix-ID|
idx index of the current entry in the quickfix
- list specified by 'id' or 'nr'. If set to '$',
- then the last entry in the list is set as the
- current entry. See |quickfix-index|
- items list of quickfix entries. Same as the {list}
+ list specified by 'id' or 'nr'. If set to
+ '$', then the last entry in the list is set as
+ the current entry. See |quickfix-index|
+ items list of quickfix entries. Same as the {list}
argument.
lines use 'errorformat' to parse a list of lines and
add the resulting entries to the quickfix list
@@ -10190,11 +10202,11 @@ setqflist({list} [, {action} [, {what}]]) *setqflist()*
a function or a funcref or a lambda. Refer to
|quickfix-window-function| for an explanation
of how to write the function and an example.
- title quickfix list title text. See |quickfix-title|
+ title quickfix list title text. See |quickfix-title|
Unsupported keys in {what} are ignored.
- If the "nr" item is not present, then the current quickfix list
- is modified. When creating a new quickfix list, "nr" can be
- set to a value one greater than the quickfix stack size.
+ If the "nr" item is not present, then the current quickfix
+ list is modified. When creating a new quickfix list, "nr" can
+ be set to a value one greater than the quickfix stack size.
When modifying a quickfix list, to guarantee that the correct
list is modified, "id" should be used instead of "nr" to
specify the list.
@@ -10239,14 +10251,14 @@ setreg({regname}, {value} [, {options}]) *setreg()*

If {options} contains no register settings, then the default
is to use character mode unless {value} ends in a <NL> for
- string {value} and linewise mode for list {value}. Blockwise
+ string {value} and linewise mode for list {value}. Blockwise
mode is never selected automatically.
Returns zero for success, non-zero for failure.

*E883*
Note: you may not use |List| containing more than one item to
- set search and expression registers. Lists containing no
- items act like empty strings.
+ set search and expression registers. Lists containing
+ no items act like empty strings.

Examples: >
:call setreg(v:register, @*)
@@ -10326,7 +10338,7 @@ settagstack({nr}, {dict} [, {action}]) *settagstack()*
{nr} can be the window number or the |window-ID|.

For a list of supported items in {dict}, refer to
- |gettagstack()|. "curidx" takes effect before changing the tag
+ |gettagstack()|. "curidx" takes effect before changing the tag
stack.
*E962*
How the tag stack is modified depends on the {action}
@@ -10400,7 +10412,7 @@ shellescape({string} [, {special}]) *shellescape()*
replace all "'" with "'\''".

The {special} argument adds additional escaping of keywords
- used in Vim commands. When it is not omitted and a non-zero
+ used in Vim commands. When it is not omitted and a non-zero
number or a non-empty String (|non-zero-arg|), then special
items such as "!", "%", "#" and "<cword>" (as listed in
|expand()|) will be preceded by a backslash.
@@ -10416,8 +10428,8 @@ shellescape({string} [, {special}]) *shellescape()*
escaped a second time.

The "\" character will be escaped when 'shell' contains "fish"
- in the tail. That is because for fish "\" is used as an escape
- character inside single quotes.
+ in the tail. That is because for fish "\" is used as an
+ escape character inside single quotes.

Example of use with a |:!| command: >
:exe '!dir ' .. shellescape(expand('<cfile>'), 1)
@@ -10433,16 +10445,17 @@ shellescape({string} [, {special}]) *shellescape()*


shiftwidth([{col}]) *shiftwidth()*
- Returns the effective value of 'shiftwidth'. This is the
+ Returns the effective value of 'shiftwidth'. This is the
'shiftwidth' value unless it is zero, in which case it is the
'tabstop' value. This function was introduced with patch
7.3.694 in 2012, everybody should have it by now (however it
did not allow for the optional {col} argument until 8.1.542).

When there is one argument {col} this is used as column number
- for which to return the 'shiftwidth' value. This matters for the
- 'vartabstop' feature. If the 'vartabstop' setting is enabled and
- no {col} argument is given, column 1 will be assumed.
+ for which to return the 'shiftwidth' value. This matters for
+ the 'vartabstop' feature. If the 'vartabstop' setting is
+ enabled and no {col} argument is given, column 1 will be
+ assumed.

Can also be used as a |method|: >
GetColumn()->shiftwidth()
@@ -10458,7 +10471,7 @@ simplify({filename}) *simplify()*
Unix) are not resolved. If the first path component in
{filename} designates the current directory, this will be
valid for the result as well. A trailing path separator is
- not removed either. On Unix "//path" is unchanged, but
+ not removed either. On Unix "//path" is unchanged, but
"///path" is simplified to "/path" (this follows the Posix
standard).
Example: >
@@ -10540,11 +10553,11 @@ sort({list} [, {how} [, {dict}]]) *sort()* *E702*
can be used to ignore case. Zero means to not ignore case.

When {how} is given and it is 'l' then the current collation
- locale is used for ordering. Implementation details: strcoll()
- is used to compare strings. See |:language| check or set the
- collation locale. |v:collate| can also be used to check the
- current locale. Sorting using the locale typically ignores
- case. Example: >
+ locale is used for ordering. Implementation details:
+ strcoll() is used to compare strings. See |:language| check
+ or set the collation locale. |v:collate| can also be used to
+ check the current locale. Sorting using the locale typically
+ ignores case. Example: >
" ö is sorted similarly to o with English locale.
:language collate en_US.UTF8
:echo sort(['n', 'o', 'O', 'ö', 'p', 'z'], 'l')
@@ -10563,11 +10576,11 @@ sort({list} [, {how} [, {dict}]]) *sort()* *E702*
sort a list of strings with numbers!

When {how} is given and it is 'N' then all items will be
- sorted numerical. This is like 'n' but a string containing
+ sorted numerical. This is like 'n' but a string containing
digits will be used as the number they represent.

When {how} is given and it is 'f' then all items will be
- sorted numerical. All values must be a Number or a Float.
+ sorted numerical. All values must be a Number or a Float.

When {how} is a |Funcref| or a function name, this function
is called to compare items. The function is invoked with two
@@ -10579,7 +10592,7 @@ sort({list} [, {how} [, {dict}]]) *sort()* *E702*
used to set the local variable "self". |Dictionary-function|

The sort is stable, items which compare equal (as number or as
- string) will keep their relative position. E.g., when sorting
+ string) will keep their relative position. E.g., when sorting
on numbers, text strings will sort next to each other, in the
same order as they were originally.

@@ -10675,7 +10688,7 @@ sound_stop({id}) *sound_stop()*
package, otherwise sound may not stop.

On MS-Windows, this does not work for event sound started by
- `sound_playevent()`. To stop event sounds, use `sound_clear()`.
+ `sound_playevent()`. To stop event sounds, use `sound_clear()`.

Can also be used as a |method|: >
soundid->sound_stop()
@@ -10761,7 +10774,7 @@ split({string} [, {pattern} [, {keepempty}]]) *split()*
empty each white space separated sequence of characters
becomes an item.
Otherwise the string is split where {pattern} matches,
- removing the matched characters. 'ignorecase' is not used
+ removing the matched characters. 'ignorecase' is not used
here, add