Hi Terry,
Here are the infos you asked:
root@OpenWrt:/# free
total used free shared buffers
Mem: 28860 19136 9724 0 1728
-/+ buffers: 17408 11452
Swap: 0 0 0
root@OpenWrt:/#
root@OpenWrt:/# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 5.0M 272.0K 4.7M 5% /
/dev/root 2.0M 2.0M 0 100% /rom
tmpfs 14.1M 68.0K 14.0M 0% /tmp
tmpfs 14.1M 24.0K 14.1M 0% /tmp/root
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 5.0M 272.0K 4.7M 5% /overlay
overlayfs:/overlay 5.0M 272.0K 4.7M 5% /
root@OpenWrt:/#
/etc/config/wireless output:
root@OpenWrt:/# cat /etc/config/wireless
config wifi-device radio0
option type mac80211
option channel 11
option hwmode 11g
option path 'platform/ar934x_wmac'
option htmode HT20
# REMOVE THIS LINE TO ENABLE WIFI:
#option disabled 1
config wifi-iface
option device radio0
option network lan
option mode ap
option ssid OpenWrt
option encryption none
root@OpenWrt:/#
/etc/config/network:
root@OpenWrt:/# cat /etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdb9:11b3:0c2d::/48'
config interface 'lan'
option ifname 'eth1'
option force_link '1'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option ifname 'eth0'
option proto 'dhcp'
config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '0 1 2 3 4'
root@OpenWrt:/#
I'd really like to try SECN manually, if you can provide some instructions I'd be glad to try it.
cheers,