--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/153b1e6f-c54a-499c-9e11-365f06f48481%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Hello Steve,
Thank you for responding. I am studding the possibility of using MP devices as an ATA for a service providers.
the Mesh topology is not a requirement and the fact of using MP devices is due of the prices of these devices.
it is a requirement to have a minimum of 2 FXO ports in the ATA.it is a requirement to ( Openvpn, Sshuttle ) vpn clients on the ATA.Wifi enabled devices is not a requirement.I have used IP04 with 3 FXS and 1 FXO few yeas ago and it was perfect but still the IP0x rang is quite expensive for the plan, since I am limiting my choices with some thing less than 100$ .So far MP2 can do every thing but it is limited to one FXO.I would appreciate if you can guide me to some directions or solutions.Best regards
On Thursday, 22 October 2015 16:41:21 UTC+3, Steve Song wrote:
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/19e5c48d-0ce1-44ec-b5d3-bc084d463c77%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/92ca281b-de81-4a7b-a989-645c79915e8b%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/CAD58EkwNfUwkkqwAsp6j9QvRYobzL1QJ5_rdMx_kn0pL%2BV9uzw%40mail.gmail.com.