Hi
I am trying to implement a classroom router and I see only the development softwares.
It article says the development software are available at
This does not seem to be available. Please advice where I can download the software.
Don’t we have production software’s as yet?
Regards,
Sylvester
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/001501d11d2f%2457d2b470%2407781d50%24%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
Hi
I have downloaded it and upgraded the MP2, I do not have an option to change the mode to Master.
See below screenshot,
Regards,
Sylvester
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/CAD58EkwRebPtYM%3DDY%3DxGFhLVVzHAxEmEXvXNjzuew33BmRAEKA%40mail.gmail.com.
Hi
Please advise on the below,
1) Classroom Router after upgrading I cant chage the mode to Master.. its only showing Single.
2) Additionally advice if you are in a classroom setup cant we make use of the FXS port on the MP2, when I do the upgrade for FXS I loose the configuration for classroom router.
3) Is it possible to integrate the classroom setup with the MP2 designed for home use to provide internet & telephone?
4) The diagram below shows the proposed connectivity.
Regards,
Sylvester
From: Sylvester Chibamo [mailto:sylveste...@gmail.com]
Sent: 12 November 2015 03:14 PM
To: 'village-...@googlegroups.com'
Subject: RE: [vt-dev] MP2 to be Classroom Router
Hi
I have downloaded it and upgraded the MP2, I do not have an option to change the mode to Master.
See below screenshot,
Regards,
Sylvester
From: village-...@googlegroups.com [mailto:village-...@googlegroups.com] On Behalf Of T Gillett
Sent: 12 November 2015 01:03 PM
To: village-telco-dev
Subject: Re: [vt-dev] MP2 to be Classroom Router
Stable firmware is here:
http://download.villagetelco.org/firmware/secn/stable/mp-02/SECN_3/GA01.1/CR/
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/CAD58EkwRebPtYM%3DDY%3DxGFhLVVzHAxEmEXvXNjzuew33BmRAEKA%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/001701d11deb%24cd7d3530%2468779f90%24%40gmail.com.