Is it possible to change the nic name to custom one using vagrantfile ? i.e instead of 'enp0s8' could I specify 'ens100' ?
[vagrant@ansible ~]$ ifconfig
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255
inet6 xxxxxxxxxxxxxxx prefixlen 64 scopeid 0x20<link>
ether 09:00:30:1f:gc:83 txqueuelen 1000 (Ethernet)
RX packets 45752 bytes 63057452 (60.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 7547 bytes 558118 (545.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp0s8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.17.28.180 netmask 255.255.255.0 broadcast 192.17.28.255
inet6 xxxxxxxxxxxxxx prefixlen 64 scopeid 0x20<link>
ether 09:00:30:gc:dc:92 txqueuelen 1000 (Ethernet)
RX packets 86 bytes 8543 (8.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 55 bytes 8108 (7.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0