Hi all
I have an RS Components RepRapPro Ormerod, BRAND NEW IN BOX, which could be used to fight COVID-19 in our print farm.
The catch? It is a proper kit and needs significant building to be usable. And it’s a bit of a collector’s piece that I was looking forward to really taking my time over and building sometime. So ideally if someone who previously built one, or a Thames Valley RepRap or similar, wants to build it both FAST AND to the letter of the instructions, with good crimping skills and a penchant for tidy cable management – that would be great! It would be a good cause as it could then be put straight to work to make face shields in our growing print farm.
Sorry to be both demanding AND fussy, but I am just too stretched to do it myself right now!
Ian? J
Cheers
Alex Gibson
+44 7813 810 765 @alexgibson3d 37 Royal Avenue, Reading RG31 4UR
admg consulting
edumaker limited
· Project management
· Operations & Process improvement
· 3D Printing
--
---
You received this message because you are subscribed to the Google Groups "TVRepRapUG" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tvreprapug+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/tvreprapug/ef46bad6-c1d0-4cf3-b18a-86afeee3d973%40googlegroups.com.