TBCME 7 multiple errors on opening

[Tim Jones]

Hi

Have just installed TBCME 7, but when I open it I get a stream of error in the UI: 
e.g. 
Plug-in org.topbraidcomposer.navigation was unable to load class org.topbraidcomposer.navigation.subclassestree.SubClassesTreeView.

Plug-in "org.topbraidcomposer.navigation" was unable to instantiate class "org.topbraidcomposer.navigation.propertiestree.PropertiesTreeView".

and in the log:

I unzipped the distribution into a clean folder and used my existing workspace folder (from the previous version), which warned me that it would be upgraded.

Is there something that I have missed or done wrong?

Thanks,

Tim 

[Holger Knublauch]

I suspect this is the same error that Michel Bohms had reported on the same mailing list a few days ago. This is a regression in TBC that we will fix ASAP.

Meanwhile, if your existing workspace contains more than one graph/file with the same base URI, it would crash at start-up and produce these many alarming errors. Please go through the workspace and check whether two files have the same base URI. This may for example happen if you have copied the same file with two names, or saved the same graph both as Turtle and RDF/XML.

Holger

--
You received this message because you are subscribed to the Google Groups "TopBraid Suite Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to topbraid-user...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/topbraid-users/8200b155-a0e4-4c17-a146-841ab6742a3en%40googlegroups.com.

[Bohms, H.M. (Michel)]

I had it yesterday again having thought i undoubled...wiil recheck and send log for info.

Michel

Op 26 mrt. 2021 00:13 schreef Holger Knublauch <hol...@topquadrant.com>:

To view this discussion on the web visit https://groups.google.com/d/msgid/topbraid-users/37ac326e-5a0d-1a8f-13a8-7019b2945ae1%40topquadrant.com.

 

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. TNO accepts no liability for the content of this e-mail, for the manner in which you use it and for damage of any kind resulting from the risks inherent to the electronic transmission of messages.

[Bohms, H.M. (Michel)]

It was indeed some leftover doubling on my side:

 

Often the case when you have alternative serialisations for the same ontology.

 

For the time being I’ll use the 7beta which starts ok.

 

Gr michel

 

Dr. ir. H.M. (Michel) Bohms Scientist Specialist Structural Reliability T +31 (0)88 866 31 07 M +31 (0)63 038 12 20 E michel...@tno.nl Location

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. TNO accepts no liability for the content of this e-mail, for the manner in which you use it and for damage of any kind resulting from the risks inherent to the electronic transmission of messages.

 

Van: topbrai...@googlegroups.com <topbrai...@googlegroups.com> Namens Holger Knublauch
Verzonden: vrijdag 26 maart 2021 00:13
Aan: topbrai...@googlegroups.com
Onderwerp: Re: [topbraid-users] TBCME 7 multiple errors on opening

 

I suspect this is the same error that Michel Bohms had reported on the same mailing list a few days ago. This is a regression in TBC that we will fix ASAP.

Meanwhile, if your existing workspace contains more than one graph/file with the same base URI, it would crash at start-up and produce these many alarming errors. Please go through the workspace and check whether two files have the same base URI. This may for example happen if you have copied the same file with two names, or saved the same graph both as Turtle and RDF/XML.

Holger

 

On 2021-03-26 12:01 am, Tim Jones wrote:

Hi

 

Have just installed TBCME 7, but when I open it I get a stream of error in the UI: 
e.g. 
Plug-in org.topbraidcomposer.navigation was unable to load class org.topbraidcomposer.navigation.subclassestree.SubClassesTreeView.

 

Plug-in "org.topbraidcomposer.navigation" was unable to instantiate class "org.topbraidcomposer.navigation.propertiestree.PropertiesTreeView".

 

and in the log:

 

I unzipped the distribution into a clean folder and used my existing workspace folder (from the previous version), which warned me that it would be upgraded.

 

Is there something that I have missed or done wrong?

Thanks,

 

Tim 

--
You received this message because you are subscribed to the Google Groups "TopBraid Suite Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to topbraid-user...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/topbraid-users/8200b155-a0e4-4c17-a146-841ab6742a3en%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "TopBraid Suite Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to topbraid-user...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/topbraid-users/37ac326e-5a0d-1a8f-13a8-7019b2945ae1%40topquadrant.com.

[Holger Knublauch]

On 26/03/2021 5:55 pm, 'Bohms, H.M. (Michel)' via TopBraid Suite Users wrote:

It was indeed some leftover doubling on my side:

 

Often the case when you have alternative serialisations for the same ontology.

 

For the time being I’ll use the 7beta which starts ok.

Yes, or even stick to 6.4.x as TBC's 7.0 didn't change much apart from EDG-related changes and the web service technologies, until we have replaced this broken version.

Holger

To view this discussion on the web visit https://groups.google.com/d/msgid/topbraid-users/9c8bbe5ab9f146ae902306b4e883e50c%40tno.nl.