Disabled actions for one or more modules

33 views
Skip to first unread message

Rachel Delafon

unread,
Nov 8, 2019, 7:26:43 PM11/8/19
to tla...@googlegroups.com
Hi everyone, 

In my last specification, TLC warns me that some actions have disabled? 
The message is formatted has an hyperlink. But When I click on it, nothing happens.
Would it possible to know which actions have been disabled? 
From where should I start?

Thanks, 


AmirHossein SayyadAbdi

unread,
Nov 9, 2019, 9:43:59 AM11/9/19
to tla...@googlegroups.com
Hi Rachel,

If you run the TLC model checker and wait for it to finish then you can view your specification and you will see a few yellow indicators each pointing to a disabled action.

An indicator is placed exactly to the left side of a disabled action's definition in your spec.

AmirHossein

--
You received this message because you are subscribed to the Google Groups "tlaplus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tlaplus+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tlaplus/CAMCHOhM0oNB7jzxDtgSAfeC7mmGdx-HKkmixL0bjiLZNrY9KJw%40mail.gmail.com.

Rachel Delafon

unread,
Nov 12, 2019, 10:10:16 AM11/12/19
to tla...@googlegroups.com
Hi, 

thanks for your feedback. 
Unfortunately, no yellow indicators found neither in the specification nor in the statistics sections. 

Some properties defined in the spec were not verified i.e. not added in the Invariant section  (because I did not want them to be verified). Finally, I've added some of them (not all of them) and I don't have any warning message anymore. 


Rachel

  

loki der quaeler

unread,
Nov 12, 2019, 4:00:03 PM11/12/19
to tlaplus
Are you running on Windows? If so, the lack of colorizing is a known bug in the underlying platform on which the Toolbox runs - https://github.com/tlaplus/tlaplus/issues/341

-l

On Tuesday, November 12, 2019 at 7:10:16 AM UTC-8, Rachel wrote:
Hi, 

thanks for your feedback. 
Unfortunately, no yellow indicators found neither in the specification nor in the statistics sections. 

Some properties defined in the spec were not verified i.e. not added in the Invariant section  (because I did not want them to be verified). Finally, I've added some of them (not all of them) and I don't have any warning message anymore. 


Rachel

  

On Sat, Nov 9, 2019 at 3:43 PM AmirHossein SayyadAbdi <amir.a...@gmail.com> wrote:
Hi Rachel,

If you run the TLC model checker and wait for it to finish then you can view your specification and you will see a few yellow indicators each pointing to a disabled action.

An indicator is placed exactly to the left side of a disabled action's definition in your spec.

AmirHossein

On Sat, Nov 9, 2019, 3:56 AM Rachel Delafon <bad.r...@gmail.com> wrote:
Hi everyone, 

In my last specification, TLC warns me that some actions have disabled? 
The message is formatted has an hyperlink. But When I click on it, nothing happens.
Would it possible to know which actions have been disabled? 
From where should I start?

Thanks, 


--
You received this message because you are subscribed to the Google Groups "tlaplus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tla...@googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "tlaplus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tla...@googlegroups.com.

Rachel Delafon

unread,
Nov 13, 2019, 8:49:29 AM11/13/19
to tla...@googlegroups.com
Hi, 

I'm running TLC on Mac OS Mojave. 
Thanks for the update.

R.




To unsubscribe from this group and stop receiving emails from it, send an email to tlaplus+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tlaplus/5a0f748a-51a7-402d-82df-ea8639def2b7%40googlegroups.com.
Reply all
Reply to author
Forward
0 new messages