Showing Maintainence Mode Active

[Vineet .V]

Hi,

I am working on structR, but i got no connection error on that. So, I activated maintainence mode. But now its not deactivating from 2 days. 

If anyone has solution for this, pls reply ASAP.

Thank You!

Vineet 

[Kai Schwaiger]

Hi Vineet,

Maintenance mode stays active until it is disabled.

In maintenance mode, a message is shown on the default port.

Structr and the application inside can be reached via the maintenance port(s).

You can turn off maintenance mode two ways:

1. If structr is still running, you should be able to connect via port 8182 (if you have not changed that port)

http://localhost:8182/structr/config    The configuration servlet where you need the superadmin password and then disable maintenance.

2. If structr is stopped, you can edit the config file structr.conf (usually located in /usr/lib/structr/structr.conf) and remove the line “maintenance.enabled = true”

At next start of structr, maintenance mode will be off

Does that help?

Best

Kai

https://structr.com
Kai Schwaiger COO kai.sc...@structr.com Festnetz +49 69 / 3487287-80 Mobil +49 177 / 48 16 204
Structr GmbH Hanauer Landstraße 291 60314 Frankfurt am Main Deutschland / Germany	Geschäftsführer: Axel Morgner Sitz der Ges.: Frankfurt a. M. HR: AG Frankfurt a. M. HRB 92262 Umsatzsteuer-ID: DE 279486092

--
You received this message because you are subscribed to the Google Groups "structr" group.
To unsubscribe from this group and stop receiving emails from it, send an email to structr+u...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/structr/36e84165-d9b1-4e5d-9f93-c108e5863f58n%40googlegroups.com.