Massimiliano
I am a bit late to the conversion, so this might already be covered.
I run two module systems on our hpc, spack and a standard module system that came with the system. In both cases, if I create a .version file in a module directory containing the default module, example below for intel-tbb, I simply have to run “module load intel-tbb” and it will load this version by default.
#%Module1.0
set ModulesVersion 2020.3-gcc6.5.0-z7izbv2
regards
---------------------------------------------------------------------
Richard A. Young
HPC Systems Engineer | Office of Research Development | Q338A
T: +61 7 4631 5557 | M: +61 437 544 370
---------------------------------------------------------------------
--
You received this message because you are subscribed to the Google Groups "Spack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
spack+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/spack/0be9150c-f4e8-4132-b308-b06fd81d72f9n%40googlegroups.com.