--
You received this message because you are subscribed to the Google Groups "souliss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/2ee65247-9bdf-4fd0-ac6c-7e7b9b4e4715%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Hi Juan,
nice idea, hope that will succeed :)
In my opinion SoulissApp is getting older and we miss users in openHAB to be near to a product.
Your web interface is a nice step forward. It makes things simpler, that's good.
Regards,
Dario.
P.S.: The best way to share is the use of Tutorials on the next website.
From Mobile.
I'm a souliss virgin, so all I can offer is my encouragement and admiration for what you are all doing, and to congratulate some very well-made points - especially the inarguable fact that without the commitment and drive from Dario none of this would even be possible... which may be common knowledge, but still merited being voiced.
My respect to you all.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/8e18fbd4-67db-432c-b288-62c69ca24279%40googlegroups.com.
In file included from Souliss_ESPv3_5.ino:144:0:
Functions.h: In function 'bool EEPROM_CONFIG()':
Functions.h:49: error: 'config' was not declared in this scope
switch (config.byte0) {
^
Functions.h:100: error: 'config' was not declared in this scope
switch (config.byte1) {
^
Functions.h:131: error: 'config' was not declared in this scope
switch (config.byte2) {
^
Souliss_ESPv3_5.ino: In function 'void loop()':
Souliss_ESPv3_5:456: error: 'Souliss_T1n_BrightSwitch' was not declared in this scope
Souliss_ESPv3_5:481: error: 'Souliss_T1n_BrightSwitch' was not declared in this scope
Souliss_ESPv3_5.ino: In function 'void loop()':
Souliss_ESPv3_5:452: error: 'Souliss_T1n_BrightSwitch' was not declared in this scope
Souliss_ESPv3_5:477: error: 'Souliss_T1n_BrightSwitch' was not declared in this scope
Its for ESP12 with adapter, but want to make a v2 with an Esp12e without adapter.
Am in holidays now but I planned to release next Monday. I'm working on last steps of the sketch.
Regards.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/bc078a27-3e95-4dbd-aca3-3041824e750c%40googlegroups.com.
In file included from Souliss_ESPv3_5.ino:150:0:
global.h: In function 'void Souliss_Node_Start()':
global.h:62: error: 'LOG' was not declared in this scope
LOG.println("Gateway Mode");
^
global.h:71: error: 'LOG' was not declared in this scope
LOG.println("No Gateway Mode coz No Wifi");
^
global.h:76: error: 'LOG' was not declared in this scope
LOG.println(nowifi);
^
global.h: In function 'void ConfigureWifi()':
global.h:131: error: 'LOG' was not declared in this scope
LOG.println("Configuring Wifi");
^
In file included from Souliss_ESPv3_5.ino:150:0:
global.h: In function 'bool EEPROM_CONFIG()':
global.h:195: error: 'LOG' was not declared in this scope
LOG.print(LDR_SENSOR);
^
global.h: In function 'void WriteConfig()':
global.h:278: error: 'LOG' was not declared in this scope
LOG.println("Writing Config");
^
global.h: In function 'boolean ReadConfig()':
global.h:335: error: 'LOG' was not declared in this scope
LOG.println("Reading Configuration");
^
global.h: In function 'void NTPRefresh()':
global.h:417: error: 'LOG' was not declared in this scope
LOG.println("sending NTP packet...");
^
In file included from Souliss_ESPv3_5.ino:156:0:
Page_NTPsettings.h: In function 'void send_NTP_configuration_html()':
Page_NTPsettings.h:92:2: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
Page_NTPsettings.h: In function 'void send_NTP_configuration_values_html()':
Page_NTPsettings.h:110:2: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
In file included from Souliss_ESPv3_5.ino:157:0:
Page_Information.h: In function 'void send_information_values_html()':
Page_Information.h:70: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
In file included from Souliss_ESPv3_5.ino:158:0:
Page_General.h: In function 'void send_devicename_value_html()':
Page_General.h:128: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
Page_General.h: In function 'void send_general_html()':
Page_General.h:164: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
Page_General.h: In function 'void send_general_configuration_values_html()':
Page_General.h:186: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
In file included from Souliss_ESPv3_5.ino:159:0:
PAGE_NetworkConfiguration.h: In function 'void send_network_configuration_html()':
PAGE_NetworkConfiguration.h:101: error: 'LOG' was not declared in this scope
LOG.println("Write Config");
^
PAGE_NetworkConfiguration.h:110: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
PAGE_NetworkConfiguration.h: In function 'void send_network_configuration_values_html()':
PAGE_NetworkConfiguration.h:140: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
In file included from Souliss_ESPv3_5.ino:159:0:
PAGE_NetworkConfiguration.h: In function 'void send_connection_state_values_html()':
PAGE_NetworkConfiguration.h:203: error: 'LOG' was not declared in this scope
LOG.println(__FUNCTION__);
^
In file included from Souliss_ESPv3_5.ino:160:0:
main.h: In function 'void processMain()':
main.h:72: error: 'LOG' was not declared in this scope
LOG.println(F("EEPROM Clear, Size: "));
^
In file included from Souliss_ESPv3_5.ino:163:0:
Functions.h: In function 'void SLOT_CONFIG()':
Functions.h:42: error: 'LOG' was not declared in this scope
LOG.println("SLOT CONFIG");
^
In file included from Souliss_ESPv3_5.ino:163:0:
Functions.h: In function 'uint8_t CapSense(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, int)':
Functions.h:207: error: 'LOG' was not declared in this scope
if(millis()%300==0) LOG.println("Pin\tSlotIn\tOut\tPWM\tcycles\tReturn");
^
Functions.h:208: error: 'LOG' was not declared in this scope
LOG.print(pin);
^
Functions.h:245: error: 'LOG' was not declared in this scope
LOG.print("Autocalibrate: ");
^
Souliss_ESPv3_5.ino: In function 'void setup()':
Souliss_ESPv3_5:202: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5.ino: In lambda function:
Souliss_ESPv3_5:265: error: 'LOG' is not captured
Souliss_ESPv3_5.ino: In lambda function:
Souliss_ESPv3_5:266: error: 'LOG' is not captured
Souliss_ESPv3_5.ino: In lambda function:
Souliss_ESPv3_5:268: error: 'LOG' is not captured
Souliss_ESPv3_5.ino: In lambda function:
Souliss_ESPv3_5:273: error: 'LOG' is not captured
Souliss_ESPv3_5.ino: In lambda function:
Souliss_ESPv3_5:274: error: 'LOG' is not captured
Souliss_ESPv3_5.ino: In lambda function:
Souliss_ESPv3_5:282: error: 'LOG' is not captured
Souliss_ESPv3_5.ino: In function 'void loop()':
Souliss_ESPv3_5:411: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:440: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:450: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:462: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:484: error: 'Souliss_T1n_BrightSwitch' was not declared in this scope
Souliss_ESPv3_5:486: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:509: error: 'Souliss_T1n_BrightSwitch' was not declared in this scope
Souliss_ESPv3_5:574: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:669: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5.ino: In function 'int Souliss_GetLux(const unsigned int*, const unsigned int*, byte)':
Souliss_ESPv3_5:704: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5.ino: In function 'void Souliss_GetDHT(uint8_t, uint8_t, boolean)':
Souliss_ESPv3_5:734: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5.ino: In function 'float Souliss_GetPressure_BMP180(uint8_t, uint8_t)':
Souliss_ESPv3_5:764: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:794: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:822: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:836: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:849: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:861: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:863: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:865: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5:867: error: 'LOG' was not declared in this scope
Souliss_ESPv3_5.ino: In function 'void sendInputState(bool)':
Souliss_ESPv3_5:873: error: 'LOG' was not declared in this scope
'LOG' was not declared in this scope
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/7e40eab8-7c98-4b31-b35a-924f6ea40e5d%40googlegroups.com.
OK, now it compiles excepted for ..........RGB lines, thanks a lot.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/935116b9-2f68-4cc1-9703-10caf6dc08bb%40googlegroups.com.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/c0d938c3-0402-4119-8693-f0f43537e871%40googlegroups.com.
Great work, I have the same goal. That is why I move to Souliss and arduino in the 1st place.
I wish I could contribute to souliss community like you did. But this whole things are new to me.
Best Regard,
Andi Bima
Sure Dario, I'll take some screenshots and upload in a few minutes.
Yes, if the node doesn't connect to the AP starts with STA soft AP, then you can reconfigure node, and when it's already configured you can access to the config via ip and reconfigure the node (example, to change the typical options)
Regards
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAKGhMPJxR58GANt1rrsY%3D_De8iqMFzGScaGoJ%3DXKUpcKVTsv0w%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "souliss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAN5yH6FnHQ68Pj2qUfE4xz2NrTSNmbpktLVc-WeEj-ST2fD-mw%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/c2d73d4d-1729-4f62-9f7a-6abfa1f148b0%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/cbb5016f-72e6-4acf-bac6-5e0c2155a7d4%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAKGhMP%2BBoJM2qmZ-LcutOUTL3EiOx0-f24XoazM2Sb1YoN_ysw%40mail.gmail.com.
That's great, to get out the best, this should be with a dynamic addressing network. As far as I've understood, now on the ESP the library that emulates the EEPROM is working fine using the latest cores, so things should work fine even with Dynamic Addressing.Dario.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAKGhMPKa8JqN9CE-WKOOwJZPgXFp%2B2rHKKt4W8SC_cbScCgbFA%40mail.gmail.com.
Let me know once ready.
Dario.
From Mobile.
You received this message because you are subscribed to the Google Groups "souliss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAN5yH6Gq94TRrTROur3B1QyA5GHsGOCRJOnJgrS%3DNXi87FOGJQ%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/e5575182-373f-4c06-aced-9fe4bd152095%40googlegroups.com.
Sure, let me know when I can start to merge it.
Dario.
From Mobile.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAN5yH6H%3DLyCQ_gWYaetvZ0L8awDK5ro_bPRuQ_aac7Bc5YwXxg%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAKGhMPLtZ1%3DbrF8zC3H_Zqvqqo-XhKr_2fEoeGFpbeRcZJ9E1Q%40mail.gmail.com.
Ok, works, maybe the code must be cleaned and we can merge everything but now when you open 192.168.4.1 you see the Configuration Page, the reset option in another page.
Regards
Can you please attach a screenshot, later this night I will merge it but I will not test it. Having a screenshot will help me.
Thanks,
Dario.
From Mobile.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAN5yH6F_2JF2qSMPuyxbpAkjaQPqOva4jrjNMHuEoD1av6kbOA%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAKGhMPKY9tpTtdLu3KycaDhuytR%3DnyRm9PjyTndEd9hOSsUK1A%40mail.gmail.com.
Hi all!, after a long time working "alone" to accomplish most of the parts Im very happy to explain my idea to the community. :) This is mainly because my English level is still bad, xD and I take a long time to explain this on the right way. (now 19:19 on Spain) For now I have a Google Doc on Spanish with the explanation of most of my ideas, and what we can do with this Device.Since I know about Souliss I want to make a Device to the End-Customer, one of most difficult things was the communications and the installation required, I like the Ethernet communications, but not everyone has his home wired. Then I worked with NRF Modules, but it is not reliable for me, finally I found ESP8266 modules and I think this is the best option, everyone have Wifi at home.The next step was make a device configurable via HTML, with this an End-Customer can configure the node with multiple options and behaviours, like use the node to connect an RGB led Strip with a Temperature Sensor and 1 Capacitive Button, or connect 3 Led strips, 3 buttons, and 2 relays, and a long list of Options and Variables that I've in mind (Explained on the Spanish Doc)I wrote before about a PCB I designed, I want to share the first version, but I want to notice that Im working on a new version now, I'm working with a close friend who works developing electrical circuits, we'll do the next version with two-side PCB and the same dimensions (5x5cm). this board needs to meet most of the needs in a home automation system , it is imperative that the user can change and set it according to your needs, also need to be easy to install.The board it's just the base, but the real potential of the idea it's join this awesome framework, my board and the potential of 3d Printing, I maded some designs to integrate Souliss on our homes, and more are coming. A 3d Printed Lamp with RGB inside, a Soulliss wallswitch, a Souliss Box with capacitive buttons on it, a box with a DIN Rail, a box to put outside (WP), and any design you want. Personalized with Souliss Logo, Words, or any other personalization... I have in mind to develop some kink of "modules" that can be easily changed to have a configuration or other, Example: plug any kind of sensor on the same pins and change the configuration on HTML.This idea needs the community to make it true, because I want to make a "kickstart", give it to the community, and further development.I keep in touch with my mentor on the project, he teaches a master at the University of Malaga on Arduino and its possibilities and he has designed products for 3d printers and robotics, It has offered to help me in this project. Also a friend its helping me with the recording, production and post-production of a striking video showing most of the possiblities of this "Souliss Device".The idea it's make an opensource, little, cheap, powerful and versatile product, and let the community show their ideas.Let me make clear that I do this as a personal project, but can be a professional one if I can achieve a few tasks that I've to make. I do not want to anticipate events, but I would like to start a crowdfunding project, this last was suggested by my mentor, he believed to be a very mature project with many possibilitiesWell, here is my starting "post-point", a lot of time spended on this :) (20:57 Spanish time) I want to hear your suggestions. :)I can share my Doc, its in Spanish, but I need some time to traslate and explain well on english, if someone it's interested I can share it. Send me a mail.Regards.
Am working on the new design, but you can use the previous one.
Regards and thanks for your interest.
Juan, any news on this? Have you already received the next revision pcbs? This project is really amazing :)
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/668d4442-3aab-4ca3-9dc9-ede99decf3e9%40googlegroups.com.
Am working on the new design, but you can use the previous one.
Regards and thanks for your interest.
El 15/09/2015 18:46, "Marko S" <mark...@gmail.com> escribió:
Juan, any news on this? Have you already received the next revision pcbs? This project is really amazing :)
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+unsubscribe@googlegroups.com.
This can be interesting too! We can Upload a sketch via Wifi to the ESPRegards
El lunes, 5 de octubre de 2015, 20:18:21 (UTC+2), Juan Pinto escribió:
Hi all, I was a bit lost this past days but Im working on this :P The v2 is near to be done I need to work on the routing but before I want to ask what capacitors need to be used, the new pcb is two-side 5x5cm with smd components and have connectors for 3 Led strips (1 RGB), I2C, SPI connector, USART and all other pins are available to use. It's powered with 12v and have 5v and 3.3v Rails.Am working on a new example based on my 3.5 version but adapted to the new version of Souliss, I added one more configuration HTML webpage to configure the Slots of the Node and other values like capacitive thresold, altitude (for BMP180). All pins and slots are automatically configure and can be changed just entering to the IP of the node, when changes are done node will be restarted and you need to update db on SoulissApp.I'll do some tests more and share here.As reference looking at ESP forum I found this interesting web interface too:Regards
El miércoles, 16 de septiembre de 2015, 3:50:54 (UTC+2), Juan Pinto escribió:
Am working on the new design, but you can use the previous one.
Regards and thanks for your interest.
El 15/09/2015 18:46, "Marko S" <mark...@gmail.com> escribió:
Juan, any news on this? Have you already received the next revision pcbs? This project is really amazing :)
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
Hi Juan,
Have you tried the OTA update? Is it working?
Thanks,
Dario.
From Mobile.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/f8d4f8b0-f240-476b-aed9-0a88db562fb8%40googlegroups.com.
Wifi bin upload is very interesting... Did you know arduino create a temporary bin file after compile and upload sketch... i think we can use that bin file for upload? I have check it... But still wonder on the bin size file and the hex address to save it in esp..
--
You received this message because you are subscribed to the Google Groups "souliss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/6545dda8-1507-4d67-b050-e238f42b60ab%40googlegroups.com.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAJ6Uq_%3DjUr57f5mupYo4xBw57Pym-UUZiAS5jKyHB%3DcTGQfV%2Bw%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/77cda741-3e68-4ab1-82cb-e2c9cc089809%40googlegroups.com.
I don't understand your question. This is esp-12 already soldered on breakout board with all pins exposed. If your future alternative option of sensor interface board would stick on top of this would be nice, since noobs like me wouldnt need to solder directly the small esp on the board.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/3314b8c5-28d8-46ee-a501-c11d4f881467%40googlegroups.com.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/778be9b1-dffe-41ad-a1ca-13c072d57891%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/9096ebc2-a4e2-4ebe-b8dd-58e726d62498%40googlegroups.com.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/58062977-9236-4d69-bba6-7ca223e46d65%40googlegroups.com.
Hi Robin, yes with the OTA we made a big step forward.
Please ask me :P I need to practise my english, sorry if the answers by my side are too short, but I still have some problems to explain on english.
Actually all my designs have a sepparate 220AC -> 12v DC PSU, the Led Strips are powered with the same PSU.
Yes, I've actually 2 DHT on the same node to meassure Temp/Hum outside and inside my home, just take care of use different FAST and SLOW times on Souliss to get it working. On your case/examples I think will be better use Dallas Sensors DS18B20 , they are more precise and can be connected on the same wire ;)
I don't found yet any example of ESP receiving IR codes, just for send and I dont looked this examples, on receiving side you can use an Arduino connected via USART to acomplish this, I have examples to control Souliss slots from a cheap led strip remote with 24 or 44 keys, I don't remember where is but I can search it :P
The ESP12 and 12E have 1mm between pins so it's easy to solder with a tiny soldering iron. I try to make the holes on the new design but it's hard for me because it's my first time with Eagle and I have problems to make the routes and others, maybe someone like Lesjaw and others can help me on this.
Regards!
PD. If I wrote something wrong please correct me :P
And yes Juan, I just noticed my cock-up which caused your ADC comment - it should have read something like "GPIO12 or ADC 'mode shared' with RX for either external analog or digital sensor", but got messed up during the many edits. Thanks,
Robin.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/e3ab1706-3c1b-4d7c-9f07-04e246c582c0%40googlegroups.com.
Guys please test the release 7.1 and OTA, I need multiple feedback.
Dario.
From Mobile.
You received this message because you are subscribed to the Google Groups "souliss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAN5yH6GOENHq-s4-KjP0QgfOx9%2B04O0_%2B6HLe4uRFTEx-Xpajw%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "souliss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/79c2b8de-b727-4e44-ad94-78aa2ccc3b5c%40googlegroups.com.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/CAKGhMPKYbJMyrc_1rH_agAU-s4u4_guTcg%2BQBd07BOhnDm3jQQ%40mail.gmail.com.
Yes, got it :)
But even using OTA you should always select 1M even if the OTA limits the real use at 512K.
Dario.
From Mobile.
--
You received this message because you are subscribed to the Google Groups "souliss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/91f6a080-578e-48fe-b6b6-123742781b16%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "souliss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/334d26f1-9e95-472a-8e24-93d4979c3ba9%40googlegroups.com.
--
You received this message because you are subscribed to a topic in the Google Groups "souliss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/souliss/H0g56a0Q4oM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to souliss+u...@googlegroups.com.
To post to this group, send email to sou...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/0cab1428-4efe-40e1-9038-c423d11c9ffc%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/souliss/fe734969-b7e3-4494-9089-75339f65adf7%40googlegroups.com.