Reset energy counter in Shelly 2.5

[Whabby]

Hi all

My Syelly 2.5 with Tasmota 10.0.0 display fantasy values in energy today, energy yesterday and energy total.

In the console I entered
- EnergyToday 0

- EnergyYesterday 0

- EnergyTotal 0

After that, the displayed values were still the same as before. What's wrong?

Thanks for a solution:-)

[Philip Knowles]

What are the configuration settings? Have you updated recently or is it a new flash?

What do you mean by ‘fantasy values’?

 

Regards

 

Phil K

 

 

Sent from Mail for Windows

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/31edf374-5f3c-4880-a1b6-b4b5af195d5fn%40googlegroups.com.

 

[Whabby]

"Fantasy values" means in that case: Energy Total -1934.732 kWh, Energy Yesterday -8432.265 kWh ...

My configuration for Shelly is  "{"NAME":"Shelly 2.5","GPIO":[56,0,17,0,21,83,0,0,6,82,5,22,156],"FLAG":2,"BASE":18}", yes, it's a new flash.

Regards

[Philip Knowles]

It’s a lot easier to take a screenshot of the module configuration page so we don’t need to work out what each code means.

The mapping of GPIO changed from V9.1 and, according to Blakadder, the configuration should be

{"NAME":"Shelly 2.5","GPIO":[320,0,32,0,224,193,0,0,640,192,608,225,3456,4736],"FLAG":0,"BASE":18}

Not promising that this will fix it though.

To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/f1447b89-cef4-40f9-9b1f-7b6f7a87e9e6n%40googlegroups.com.

 

[Whabby]

Well, changed Tempülate:

• Template {"NAME":"Shelly 2.5","GPIO":[320,0,32,0,224,193,0,0,640,192,608,225,3456,4736],"FLAG":0,"BASE":18}
• Module 0

After, looks like this:


Main menu is like this:

M

Entered commands:


Main menu values are the same as above :-(

[Philip Knowles]

Remember that you have 2 energy readings (for Relay1 and Relay 2).

 

I suspect that you need to enter EnergyTotal 0,0 to reset both.

 

Regards

 

Phil K

 

 

Sent from Mail for Windows

 

From: Whabby
Sent: 24 November 2021 12:38
To: TasmotaUsers
Subject: Re: Reset energy counter in Shelly 2.5

 

Well, changed Tempülate:

• Template {"NAME":"Shelly 2.5","GPIO":[320,0,32,0,224,193,0,0,640,192,608,225,3456,4736],"FLAG":0,"BASE":18}
• Module 0

After, looks like this:

Main menu is like this:

M

Entered commands:

To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/76c42d5c-4e3b-4e4c-9c1e-77321abb80c8n%40googlegroups.com.

 

[Whabby]

P.roblem solved:
In Tasmota 10.0.0 the syntax is

EnergyTotal1 0 for relay1

EnergyTotal2 0 for relay2

EnergyToday1 0 for relay1
... and so on

Thanks Phil!