LYWSD03MMC with ATC Firmware transfer values to MQTT topics

[Bernd Lange]

Hi all,  I hope for tasmota experts it is just a simple question.

I am getting values from a Xiaomi thermometer modified with the atc firmware all devices were found and all the dev and values coming in in a json object also visible on my Mqtt broker but all together. I will  i.e extract one temperature from a certain sensor and send this value to a defined Mqtt topic :

example incoming 

tele/BLE_Gateway_1/SENSOR = {"Time":"2021-03-19T20:37:52","ATC358140":{"mac":"a4c138358140","Temperature":23.0,"Humidity":34.0,"DewPoint":6.3,"Battery":91,"RSSI":-78},"ATCfe4638":{"mac":"a4c138fe4638","Temperature":19.6,"Humidity":42.0,"DewPoint":6.3,"Battery":85,"RSSI":-59}}

should be sent to 

living_room/ climate/ temperature

I think i need a rule for that like

on tele/BLE_Gateway_1/SENSOR#ATCfe4638.Temperature do publish  living_room/ climate/ temperature   %value% endon"} 

but it is not working this leads to the following questions:

-Is tele/BLE_Gateway_1/SENSOR#ATCfe4638.Temperature  a correct trigger

-Am I accessing the json object correctly for the trigger

-Is the publish correctly with the %value%

Thanks in advance Bernd

[Philip Knowles]

I’m not sure if the Tasmota device is sending this message, If it is the trigger would be

on tele-ATCfe4638#Temperature

Have a look at the trigger section of the Rules page

 

Regards

 

Phil K

 

Sent from Mail for Windows 10

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/e0260c86-1452-4e84-a7fa-f839fb465454n%40googlegroups.com.

 

[Bernd Lange]

Thanks Phil, 

that did it for me, my  mistake, was to view the stuctures from MQTT side and not from the Tasmota side.

Regards Bernd