I suspect that you aren’t using an input to do the toggling. If that’s the case connect the RF output to the switch input GPIO and call it Switch 1. Add Relay1 as a ‘virtual relay’ to an unused GPIO (not the real one). Call the GPIO with the real relay Relay2 and connect it to the RF input.
Then, in console, type
pulsetime2 20
webbutton1 RF State
webbutton2 Toggle RF
If you are using a switch to do the toggling pick a momentary pushbutton but configure it as Switch2. The output will then only stay on as long as the button is pressed.
Sent from Mail for Windows
--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/CAGmni9o3y9zkj2fm-H58mgL3ww-rDqUWdsjeXoDHqNRm5KGHiA%40mail.gmail.com.