ESP32 Tasmota CAM / PIR / GPIO 13

[ohaldi]

Hello

I could install tasmota32-webcam with success.

I also added a PIR sensor on GPIO 13

In Template Parameter in set GIPO 13 to SWITCH an the value to 1

Unfortunately in the console window nothing happens.
What else do I have to adjust?

PIR SENSOR : AM312 Sensor DC 2.7 to 12V

Connection : - to GND, VCC to 5V, VOUT to GPIO13

Many thanks in advance  for your help

Otto

[Philip Knowles]

Switches don’t appear in the UI only Relays. If you want it to appear in the UI you will need to attach Relay1 to a spare GPIO. If you want to send the state of the switch to MQTT look at the Buttons and Switches page.

 

Regards

 

Phil K

 

Sent from Mail for Windows 10

--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/478f8e62-6fbc-4a22-acb0-564a57cc9b0en%40googlegroups.com.

 

[ohaldi]

Hi Phil,

Thanks for your quick answer.

Should not the Tasmota console show all events?

My idea is to send this PIR event to the domoticz application.

Small question : where is thi Bottons and Switches page?

[Philip Knowles]

No the Console and UI only show relay operations and MQTT messages

Buttons and Switches - Tasmota

 

The rules section of the above page shows how to send an MQTT message without using a ‘dummy’ relay. However, the dummy relay has advantages because you can see the state of the input at a glance and it automatically sends the MQTT messages without using rules.

To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/c5f4d814-6dc6-4080-b8aa-966a92b7707en%40googlegroups.com.

 

[ohaldi]

Thanks for your link. Every thing work well