--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/22b24385-37e4-4ce8-8811-94f50fe370cen%40googlegroups.com.
Neither, the equivalent of this from the Configure Module page
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/0013a6c4-baef-4db1-9a24-b0d70bfd47e3n%40googlegroups.com.
There are 2 versions of the WB4 on Blakadder. The Template you are using (Gosund NiteBird 8W 800lm RGBW Bulb (WB4)) has the following GPIO
GPIO04 PWM 4
GPIO12 PWM 1
GPIO13 PWM 2
GPIO14 PWM 3
GPIO16 PWM 5
The other version Gosund 8W 800lm RGBW Bulb (EUGS-WB4)) has a slightly different arrangement
GPIO04 PWM5
GPIO05 PWM4
GPIO12 PWM1
GPIO13 PWM2
GPIO14 PWM3
It may be worth trying the PWM5 on GPIO5 to see if it helps
Regards
Phil K
Sent from Mail for Windows
From: Road Lord
Sent: 26 April 2022 16:46
To: TasmotaUsers
Subject: Re: Gosund WB4 with Tasmota - flickering when dimmed
Hi,
Here you go:
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/fa84991a-9b34-4b50-b595-5fdedc0da611n%40googlegroups.com.
Did you deactivate the Template and enter the GPIO into the Configure Module page?
poniedziałek, 25 kwietnia 2022 o 22:33:11 UTC+2 knowles...@gmail.com napisał(a):
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers..@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/0013a6c4-baef-4db1-9a24-b0d70bfd47e3n%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/fa84991a-9b34-4b50-b595-5fdedc0da611n%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "TasmotaUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sonoffusers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/3c49fd1a-da9a-4a22-9955-ca901d632415n%40googlegroups.com.
I would start with an empty generic configuration and put 1 GPIO in at a time to see what happens. PWM4 and 5 are on different GPIOs so there should be a difference.
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/2541e5ca-3b72-44ed-989e-f624fef29e74n%40googlegroups.com.
It may not work but there should be a difference because PWM4 and PWM5 are on different GPIOs so one version shouldn’t work properly. The Template has been de-activated and you’ve entered in Generic haven’t you?
To view this discussion on the web, visit https://groups.google.com/d/msgid/sonoffusers/1557744e-90dd-4634-bc5f-ad2293cfa1fbn%40googlegroups.com.