how to avoid a printing deformation...

[ferns]

Hello everyone,

It has benn a long time since I get back in Solidray, and start to do some new tests. This time, it was the calibration of the machine.

After several prints, I've noticed that every print had the same problem, as you can see in the next image the "a" and "b" (with supports) prints:

I've even tried to increase the exposure time to 15000 ms/ layer to get them harder, but it seems it didn't change anything.

Does any one know how to avoid this? As I increased the exposure time, and it din't change the time at all, is it possible to reset it? Or there is another solution that I'm missing?

Thanks a lot for your attention.

Cheers,

FA

Perdonen chicos por escribir en Inglês, pero asi todos lo pueden intender.

[Miguel Goñi | KITPRINTER3D]

Hi Fernando. 

It looks like an insufficient supports problem. Have your tried to increase the number os supports for those hanging area? What resin are you using?

--
You received this message because you are subscribed to the Google Groups "SolidRay DLP-SLA 3D Printer Kit" group.
To unsubscribe from this group and stop receiving emails from it, send an email to solidray-dlp-sla-3d-p...@googlegroups.com.
To post to this group, send email to solidray-dlp-sl...@googlegroups.com.
Visit this group at https://groups.google.com/group/solidray-dlp-sla-3d-printer-kit.
To view this discussion on the web, visit https://groups.google.com/d/msgid/solidray-dlp-sla-3d-printer-kit/88fc9f9e-698f-4845-a311-bc41b53a912a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[ferns]

Hello,

One of the prints have suports and the other doesn't. It seems to have the same results. I'm not using the CW supports, as I don't get along very much with them. I'll try to increase the supports manualy.

As for the resin, I'm still with the castable FTD.

Thanks for your attention,

Cheers,

FA

sexta-feira, 29 de Janeiro de 2016 às 19:22:30 UTC, KitPrinter3D escreveu:

Hi Fernando. 

It looks like an insufficient supports problem. Have your tried to increase the number os supports for those hanging area? What resin are you using?

El 29 ene 2016, a las 20:04, ferns <fcr.a...@gmail.com> escribió:

Hello everyone,

It has benn a long time since I get back in Solidray, and start to do some new tests. This time, it was the calibration of the machine.

After several prints, I've noticed that every print had the same problem, as you can see in the next image the "a" and "b" (with supports) prints:

I've even tried to increase the exposure time to 15000 ms/ layer to get them harder, but it seems it didn't change anything.

Does any one know how to avoid this? As I increased the exposure time, and it din't change the time at all, is it possible to reset it? Or there is another solution that I'm missing?

Thanks a lot for your attention.

Cheers,

FA

Perdonen chicos por escribir en Inglês, pero asi todos lo pueden intender.

--
You received this message because you are subscribed to the Google Groups "SolidRay DLP-SLA 3D Printer Kit" group.

To unsubscribe from this group and stop receiving emails from it, send an email to solidray-dlp-sla-3d-printer-kit+unsubscribe@googlegroups.com.
To post to this group, send email to solidray-dlp-sla-3d-printer-k...@googlegroups.com.

[RONALD]