OGNbase version mb148

[Moshe Braner]

This release of OGNbase has a number of incremental improvements, mostly related to the 2-station operational mode and to the mobile mode:

* GPIO output to shunt solar panel to keep battery voltage below 4.0V
* report to APRS the RSSI of hearing from remote station
* base station listens to traffic directly one time slot every 8 sec
* report if TTGO version is running on a T-Beam
* show messages in Serial even if OLED not installed
* show "mobile" operation mode on OLED
* in mobile mode refresh web page after obtaining a GNSS fix
* change NZ freq to 869.20
* prevent crash if radio chip is not found
* improved sleep behavior in 2-station operation
* report remote background noise to base even without traffic
* if APRS port is zero, test operation without connecting to APRS

[patrick.cadek]

Hi Moshe,

Thanks for this update

kind regards

Patrick

--
You received this message because you are subscribed to the Google Groups "SoftRF_community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to softrf_communi...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/softrf_community/59c1e0f8-942c-4e5e-b4ea-8367f2a287ffn%40googlegroups.com.

--