Arthur says to me that is possible to share a config for both usage without swapping anything.
I plan to use a standalone extruder with built in temperature management, so the setup need only to add a extruder for use as E axis.The problem is now mostly the way smoothie use home position + the difference between grbl/reprap does not helpThe goal is only having a home position different to the working position and the possibility to ask machine to go to this position when needed (pause/stop/filament-out)The printer "up plus 2" work like this.Home with bed nearest operatorAsk Bed leveling from this positionZ probereturn to home positionstart printpause/stop go to home position
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/e7215b2d-105c-4d5e-8b35-8790a430ecfb%40googlegroups.com.
勇気とユーモア
HelloYes i have understand that, but nobody seem to know what is the real Gcode difference inside smoothieware, but this is not the subject
Soft endstop is not supported with reprap and leveling strategy ?In theory with my initial Z negative min value after Zprobe the Z is now 0 and this is the bed position, but the leveling seem to continue to use MCS in place of WCS.Thanks for reply
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/dec85b89-7cf8-42f1-8698-a8392a7c37da%40googlegroups.com.
勇気とユーモア
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/CAMHZkm7WVRJ_09LY%3DZZngayNkCFJ9cfq_svJHWMD_sT3urhWbQ%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/917abc35-bc82-45a0-93da-afef0ec50dca%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/917abc35-bc82-45a0-93da-afef0ec50dca%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/917abc35-bc82-45a0-93da-afef0ec50dca%40googlegroups.com.
勇気とユーモア
Another question sorry.It is normal that the first G32 point is checked 3 times ?
勇気とユーモア
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/29b7626d-7f82-4086-9e44-3652393e7569%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/29b7626d-7f82-4086-9e44-3652393e7569%40googlegroups.com.
Motor work ! So this is ok with 3.3v and uln2803a the problem is the lack of internal supply not connected to internal driver supply.Regards
Probing is ALWAYS in MCS for obvious (IMO) reasons.--Z probe offset is ignored (this is documented) only XY probe offsets are useful and used.
On Thursday, May 7, 2020 at 6:42:49 PM UTC+1, Moi Toi wrote:Thanks a lot for feedback !I will retry later to use G30 M306, i need to betterly understand what append.Today the printer head was delivered, so i try now to make the motor turn without success.The controler use a ULN2803A for input DIR/STEP i think the 3.3v 4ma from smoothie is not enough, is someone can confirm ?Br
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-support+unsub...@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/e2238c9b-615a-4014-ae34-db4a1b0f2c2a%40googlegroups.com.
HiHappy this is first print
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/A0621725-4B3E-4089-89FB-37994BD95FC1%40gmail.com.
P4.29 is a special pin and as documented cannot be used in open drain, and probably has less sink/source power look at the LPC1769 data sheet.
Motor work ! So this is ok with 3.3v and uln2803a the problem is the lack of internal supply not connected to internal driver supply.Regards
Probing is ALWAYS in MCS for obvious (IMO) reasons.--Z probe offset is ignored (this is documented) only XY probe offsets are useful and used.
On Thursday, May 7, 2020 at 6:42:49 PM UTC+1, Moi Toi wrote:Thanks a lot for feedback !I will retry later to use G30 M306, i need to betterly understand what append.Today the printer head was delivered, so i try now to make the motor turn without success.The controler use a ULN2803A for input DIR/STEP i think the 3.3v 4ma from smoothie is not enough, is someone can confirm ?Br
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/29b7626d-7f82-4086-9e44-3652393e7569%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/e2238c9b-615a-4014-ae34-db4a1b0f2c2a%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/A0621725-4B3E-4089-89FB-37994BD95FC1%40gmail.com.
勇気とユーモア
Yeah i'm happy but now i need to learn for fine tuning the extruder + using slic3r.I have see using Bltouch that the signal is inverted vs basic touch plate (NO).Did you know a way for make both working ? (using separate pin, or changing pin direction from Gcode ?)Or no other choice than order a real touchplate NC ?
I can't make soft endstop working with G32 (soft endstop Z was exceeded) i have try to make big limit without success.
--Br
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/f170e582-47d8-4989-bf88-c6b39cfc50ae%40googlegroups.com.
勇気とユーモア
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/CAMHZkm7awbUuSxuHWjQzb8dempzL-Gyh-BENZDoh%3DU9p%2B4jrSQ%40mail.gmail.com.
HiI have some trouble finding the solution for invert Touch plate to gnd logic. Mostly because 3D Touch is not like a switch and send only the signal for some uS.But I have another question, please did you see a way for wait a signal 0/1 before start print ?The goal is to use the standalone controler led signal for start printing when temperature is ok.Blue led when cold, red led when hot but these led toggle frequently according to internal pid and temperature.If print is started I need this signal does nothing anymore (I have think about a simple resume switch but if I do this and I ask a pause when the signal toggle pause is resumed automatically and this is not wanted.Something like a one shot signal.Br
On Mon, May 11, 2020 at 2:55 AM Moi Toi <golf...@gmail.com> wrote:Yeah i'm happy but now i need to learn for fine tuning the extruder + using slic3r.I have see using Bltouch that the signal is inverted vs basic touch plate (NO).Did you know a way for make both working ? (using separate pin, or changing pin direction from Gcode ?)Or no other choice than order a real touchplate NC ?Use an inverter logic gate to reverse the signal, and an AND gate to read both signals from a single pin?I can't make soft endstop working with G32 (soft endstop Z was exceeded) i have try to make big limit without success.You probably should just disable soft endstops for Z, realy.
--Br
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-support+unsub...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/f170e582-47d8-4989-bf88-c6b39cfc50ae%40googlegroups.com.
--勇気とユーモア
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-support+unsub...@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/9bee575f-24bc-43a2-8287-be80d4e76885%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/f170e582-47d8-4989-bf88-c6b39cfc50ae%40googlegroups.com.
--勇気とユーモア
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/CAMHZkm7awbUuSxuHWjQzb8dempzL-Gyh-BENZDoh%3DU9p%2B4jrSQ%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/9bee575f-24bc-43a2-8287-be80d4e76885%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/C862FCED-D689-475D-B92A-F9E85FEE8C93%40gmail.com.
勇気とユーモア
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/CAMHZkm5j1SRgEKoQPSYRFdE2W9KgBwm-6WwUrbSL8aZdt_QYrQ%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/CAMHZkm5j1SRgEKoQPSYRFdE2W9KgBwm-6WwUrbSL8aZdt_QYrQ%40mail.gmail.com.
Attached config + macro