--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/c88c8b56-6f85-48e7-899d-6ca7a5d00a4e%40googlegroups.com.
勇気とユーモア
Thanks for replyI'm newbee regarding to printer stuff and i use and like fusion 360 for milling so these seems to be normal for me to check additive function from fusion.I have check the post pro FFF generic for additiveAttached the resulting fileAnd one file from the smoopi sample folder it is 100% ok for reference ? (i see nothing about setting temperature at start, this is something fulle managed by smoopi host ?)I see with the post pro the fan settings is not active for now the result is allways M107.I see need to adapt startup and finish gcode, but for the rest....Thanks, for suggestion i will also check for Slic3r !Br
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/3f0538f7-1fdc-47cb-a46b-6515fb7590a0%40googlegroups.com.
勇気とユーモア
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/CAMHZkm4aFTXjzJKiafvKBV_rnJ3Cxj6n1rM8KuwwQwBQAEkiKQ%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "Smoothieware Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to smoothieware-sup...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/smoothieware-support/a95e24c2-fc92-4e9d-9671-b5d28e832844%40googlegroups.com.